Latest activity
-
If you lost connectivity after purging ifupdown (which removes stuff that also belongs to ifupdown2), manually creating /run/network/ and (re)starting networking services should get you going again. Once you have a working network connection... -
tcabernoch replied to the thread UEFI 2011 certificates expire in June 2026!.Ah. I ran the PS thing on a VM that did NOT have UEFI. So ya. It choked. It works fine everywhere else I tried it. PS C:\Users\tcabernoch> [System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2 023'... -
Ppetzold007 replied to the thread RTX 5080 VFIO passthrough fails on Proxmox VE 9.1 with error getting device from group 13: No such device.Ran into similar issue, turned out the issue for me is that vfio_pci messed up with power state, below module param worked for me. # or just adding vfio-pci.disable_idle_d3=1 to the kernel cmdline sudo insmod vfio_pci.ko disable_idle_d3=1
-
MI hit the same problem. For me the solution was to use create a new instance of the zfs-import@.service with a symbolic link by running this command (pool was named mainpool, adjust accordingly): ln -s /lib/systemd/system/zfs-import@.service...
-
MThat helped me too
-
Gguruevi replied to the thread UEFI 2011 certificates expire in June 2026!.What command? Both of them are standard, registry edits and scheduled taks runs. You can find them elsewhere in case there is a typo. You do need an updated/supported Windows 10/Server 2019 or higher. The Linux systems don’t have a problem...
-
Mmariokazela posted the thread RTX 6000 Ada stuck in D3cold under vfio-pci, function .0 disappears from PCI tree after remove/rescan survives reboot but recurs in Proxmox VE: Installation and configuration.Hi guys, just need your help, Setup: Proxmox VE 8 (kernel 6.x PVE) 4× NVIDIA RTX 6000 Ada (AD102) for VM passthrough All 8 functions (4× GPU + 4× HDMI audio) bound to vfio-pci IOMMU on, intel_iommu=on iommu=pt, ACS working, groups clean q35...
-
Sshaun_so replied to the thread ConnectX-4 Lx dual port with virtual functions - iommu group instability between reboots.Thanks very much! On our next update cycle, i'll have to give it a go!
-
BBubbagump210 posted the thread VNC failing with SSH errors in Proxmox VE: Installation and configuration.This seems to have popped up on my cluster in the most recent upgrade. I am on 9.1.9 and I have been on 9 for a while. This is on every node of the cluster. Errors that appears in the VNC window: /root/.ssh/config line 6: Bad key types...
-
BBubbagump210 posted the thread VNC failing with SSH errors in Proxmox VE: Installation and configuration.This seems to have popped up on my cluster in the most recent upgrade. I am on 9.1.9 and I have been on 9 for a while. Errors: /root/.ssh/config line 6: Bad key types '+ssh-dss'. /root/.ssh/config: terminating, 1 bad configuration options...
-
Uunsichtbarre replied to the thread Update to Proxmox Installation and Configuration manual.Thank you for the input. For clarification do you mean the materials were shallow or you have only dug into them slightly? Thanks, JB
-
Uunsichtbarre reacted to UdoB's post in the thread Update to Proxmox Installation and Configuration manual with
Like.
Great! Thank for this one! I've read a (very) few pages, very shallow. Looks good :-) -
Ccitricut replied to the thread [SOLVED] Cannot boot past BIOS after Proxmox 9 upgrade.I just ran into this as well. It was pretty cumbersome because I also couldn't boot into rescue mode so had to do it via debug console on the command line installed. Is there a ticket open about this? Should looked into.
-
SInisterPisces reacted to Pcom's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Hello, A couple of days ago, I updated a cluster of 4 hosts from 6.17.13-4 to the latest 7.0.2-6. Hardware configuration: 2x hosts with Xeon Gold 6148 2x hosts with Xeon E5-2660 v3 All hosts use Samsung PM1735 NVMe drives on ZFS Everything... -
ZZ1nG replied to the thread [SOLVED] Fix: NVIDIA Drivers Failing after upgrade to Proxmox 9.2.2 (Kernel 7.0.2-6-pve) / NovaCore Conflict.Ahh, that makes sense. edited the post with the updated intramfs command! In regards to nova, it's a relatively new addition to the linux kernel. There were some articles on its inclusion into the 7.0 kernel as the successor to noveau. I had...
-
Mlike many other sites and pieces of public infrastructure, ours is getting hammered by AI scrapers/bots as well. we try our best to implement counter measures, but it's a constant game of whack-a-mole.
-
EElmerFudd replied to the thread I cannot connect to Proxmox via Browser.I went though those suggestions and they have ruled out some causes but I still do not have connection I am afraid to say
-
CcollPark234 replied to the thread [SOLVED] Out of Space preventing remove of Kernels.Thank you so much! I was trying to solve this all afternoon. This solved it for me.
-
CcollPark234 reacted to daanw's post in the thread [SOLVED] Out of Space preventing remove of Kernels with Like.
See for example: https://forum.proxmox.com/threads/unable-to-remove-kernel.183685/post-853446 Or another: https://forum.proxmox.com/threads/kernel-update-fail-6-14-to-7-0-no-space-left-on-device.183763/post-853952
-
Ddaanw replied to the thread [SOLVED] Out of Space preventing remove of Kernels.See for example: https://forum.proxmox.com/threads/unable-to-remove-kernel.183685/post-853446 Or another: https://forum.proxmox.com/threads/kernel-update-fail-6-14-to-7-0-no-space-left-on-device.183763/post-853952