Latest activity
-
KJust in case anyone else stumbles across this. The instructions worked for me. My notes are attached below: Phase 1: 1 BIOS Settings - 2. Host Kernel Parameters I read that the amdgpu.gttsize parameter was deprecated on the Strix Halo Wiki...
-
jebbam posted the thread Cluster not quorate - extending auth key lifetime! in Proxmox VE: Installation and configuration.I have a 5 node Proxmox cluster co-located in a data center with ~100 KVMs that has been running happily the last year+. The ISP needed to move the servers to another building (sigh). Everything came back online, but two of the nodes, node2 and... -
Ppongomongo replied to the thread Proxmox won't boot.@Impact thank you thank you thank you for all of your help, especially with walking me through the zfs stuff. Very happy that worked and the pool re-imported with no data loss.
-
Ppongomongo replied to the thread Proxmox won't boot.Alright! Networking issue solved (rebooted router). I am now able to access pve via browser. I set all the VMs to not start at boot, and then went back into the BIOS and re-enabled virtualization. PVE host booted fine. Next I went one by one...
-
GGilberto Ferreira replied to the thread [SOLVED] Windows Server 2022 problems with VirtIO NICs.Strangely enought, it's seem that windows 2022 still have problem with new virtio net drivers yet. I have has tested with virtio-win-0.1.285-1 and get this issue with AD and FileServer. Just changed to e1000 and works fine. Using Proxmox VE 9.1.16.
-
Ppongomongo replied to the thread Proxmox won't boot.It will take me a while to edit out all the IP and MAC addresses, but I will work on it. Thank you for your help.
-
JJohannes S reacted to UdoB's post in the thread Significant IOPS Drop in Proxmox 9.1.9 VMs Compared to Other Hypervisors with
Like.
You did not say anything of the underlying filesystems...? For ZFS it may be expected as ZFS does a lot more work than classic filesystems under the hood, resulting in multiple IO-operations used for metadata etc... -
JJohannes S reacted to t.lamprecht's post in the thread Significant IOPS Drop in Proxmox 9.1.9 VMs Compared to Other Hypervisors with Like.
Yeah, server and storage hardware, software and configuration details, including VM configuration would be nice to have to try reproducing this.
-
Ppongomongo replied to the thread Proxmox won't boot.#lsblkin normal boot shows the VMs Flint-SMB is the network smb share. Probably shows offline because the PVE box is disconnected from the network. (monitor and router are far apart) # pvesm status ip ashows the primary bridge vmbr0 as UP...
-
-
Ppongomongo replied to the thread Proxmox won't boot.zfs list shows the same as in post #23 (immediately after zpool import flash in recovery mode) Frustratingly, I am still unable to ping or reach the pve host via browser. There is no recognition of the pve host by the router, all this even...
-
Ppongomongo replied to the thread Proxmox won't boot.OK! Following this post: https://forum.proxmox.com/threads/is-there-a-way-to-disable-the-automatic-start-of-vms-before-proxmox-boots.83636/ I disabled Virtualization in the BIOS. I am now able to boot into the PVE host.
-
Ppongomongo replied to the thread Proxmox won't boot.Proxmox boots, then immediately crashes. The PC does not turn off, it stays running. Recovery mode is functional, rescue boot is not. Is there a way to disable "start at boot" for the VMs and LXCs from the recovery mode CLI? That way I could...
-
Ppongomongo replied to the thread Proxmox won't boot.Ok. I tried: -boot to recovery mode -remove "intel_iommu=on" from /etc/default/grub -# update-grub -reboot, normal boot Same result. Boots to login screen, then immediately goes black. -insert live boot usb -boot to proxmox rescue boot Same...
-
DDexserver posted the thread Proxmox host and VM both failing large HTTPS downloads with Bad Record MAC / TLS decryption errors in Proxmox VE: Networking and Firewall.Hi everyone, I’m running into a very strange networking/TLS issue on my Proxmox host and getting extremely infuriated - I’m looking for suggestions on what to test next. The main symptom is that large HTTPS downloads fail with TLS/decryption...
-
Ppongomongo replied to the thread Proxmox won't boot.rescue boot does the same thing---boots to login then goes black almost immediately yes- the Intel iGPU is passed through to a VM using "intel_iommu=on"
-
Ppongomongo replied to the thread Proxmox won't boot.I can run commands in recovery mode... At this point, maybe it is easier to just reinstall Proxmox? Is there a good way to create backups of Proxmox config files from the recovery mode CLI? I have backups for the VMs and LXCs, and the data on...
-
Ppongomongo replied to the thread Proxmox won't boot.No. For all of the troubleshooting we were doing earlier, I had the pve box connected to a monitor booted into recovery mode. That is where I observed the straight to black screen. I just tried reconnecting the pve box to the network. The router...
-
Ppongomongo replied to the thread Proxmox won't boot.Ok...so I tried deleting the unit file and rebooting Proxmox with a normal boot. The boot screen passed by without showing any obvious errors and went directly to the Proxmox shell, showing the correct IP address and asking for login. This...
-
Iivenae replied to the thread Add a button for email forwarding.Ask Claude Opus, it maybe can help you. I already solved a few things with AI
-
Ppongomongo replied to the thread Proxmox won't boot.ok. just to clarify this out a bit----if I delete the unit file and boot up Proxmox without the 2TB problem drive mounted-----should I then be able to re-add the 2TB nvme drive to the database storage without damaging the subvolume mountpoints...
