Latest activity
-
HOk, too bad. In case you only want to keep the 7.0 kernels you can mount your efi partition and manually remove all the 6.x initrd.img and vmlinuz files there to make space so the apt process can complete. mount /dev/disk/by-uuid/665C-E3E3...
-
TTHE_BIG_ONE replied to the thread Q35 v11.0 causes extreme corruption on many VMs Linux/BSD/Windows (STOP 0x8007025d).I tried the following drivers: 0.1.240, 0.1.266, 0.1.271, and 0.1.285. I realized this was not a virtio scsi issue, as I said before, when it did not matter if the drive was attached using a SATA / IDE controller or SCSI controller. I am able to...
-
JBut RAID5/6 probably does not give good performance (in terms of IOPS, which you need for multiple VMs trying to use the drives at the same time). I though I mentioned that in my post.
-
Bbreakaway9000 replied to the thread Migrating Win2022 VM from Esxi (boot fail).Something has changed, these steps no longer work. I was running into some issues on a Win 2022 VM. In summary, all that was needed was Take your migrated VM and boot it using IDE Uninstall VMWare Tools; Install qemu-guest-agent, shut down VM...
-
Ddaanw replied to the thread Unable to remove kernel.Ok, too bad. In case you only want to keep the 7.0 kernels you can mount your efi partition and manually remove all the 6.x initrd.img and vmlinuz files there to make space so the apt process can complete. mount /dev/disk/by-uuid/665C-E3E3...
-
JSeems quite long to me but it obviously depends on the slowest shutdown in the chain. Did you already look into the shutdown time of each separate VM/LXC/host?
-
JJohannes S reacted to woma's post in the thread Moving from 3-node full-mesh SDN to a 6-node using switches with
Like.
Hi Patrick, Because new and old machines are same numbers you will have resources to temporarily run all guests only using new machines, so my safe and boring approach would be: build new 3 node cluster connected to switches setup up and test... -
JThat's understandable. Some of my own websites get torn to shreds for things like that too. I just wasn't sure if a database was angry or something like that, and wasn't sure how to better raise a flag about it. Sorry you folks have to deal with...
-
G_gabriel replied to the thread Q35 v11.0 causes extreme corruption on many VMs Linux/BSD/Windows (STOP 0x8007025d).Which VirtIO SCSI drivers version was ?
-
G_gabriel reacted to THE_BIG_ONE's post in the thread Q35 v11.0 causes extreme corruption on many VMs Linux/BSD/Windows (STOP 0x8007025d) with Like.
So, I've been currently running about 20 Windows guests (using VirtIO SCSI) in my home environment across 8 different PCs running Proxmox for several years. The Proxmox host PCs have a wide range of hardware ranging from an old Intel 4770k to a...
-
WWeltherrscher replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Thank you for your reply! =) Anyway, i keep hitting DMAR errors for the X540 VFs even with iommu=pt in Kernel 7.0.2-4: May 19 22:44:52 px1 QEMU[3776]: kvm: vfio_container_dma_map(0x595d88370dd0, 0xe10bb000, 0x1000, 0x7834682db000) = -28 (No...
-
WWeltherrscher reacted to fiona's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
@Weltherrscher I found an upstream patch that should resolve the issue and pinged the maintainers about it. It's a bit strange that nobody else is running into this issue, but it might depend on the specific workload pattern/guest kernel (the...
-
Jjbeck66 replied to the thread Bestehendes Proxmox von NoName 512GB SSD auf eine Samsung 980 PRO NVMe M.2 SSD, 1 TB SSD umziehen..Ich weiß nicht ob das hier noch aktuell ist. Ich habe jetzt nicht alle Beiträge bis ins letzte Detail gelesen. Aber ich habe meine Proxmox SSDs im Homelap auch erfolgreich geklont und getauscht. Es ist die beste Idee Backups der VMs zu machen...
-
LLe_Coyote posted the thread LXC: cannot mount /run inside guest after PVE 8 to 9 upgrade (was: loopback interface not coming up) in Proxmox VE: Networking and Firewall.Hello, Long time user, first time posting, because everything had been working so well so far! I have a few CTs running Linux Devuan 6 Excalibur. The network configuration is nothing out of the ordinary, and pretty much a copy/paste save for...
-
Aalexskysilk replied to the thread RAIDZ2 with 6x 480GB SSD only 1.35TB usable total.zfs list -t all df -h
-
CCIRE replied to the thread Stockage Type.Thank you, I have 8 disks of 2.4TB and I would like good performance and a spare. So a RAID6 or 5 would satisfy me, I think.
-
Hhelio replied to the thread Unable to remove kernel.I tried apt purge proxmox-kernel-6.* But it did no work. I root@proxmox:~# apt purge proxmox-kernel-6.* REMOVING: proxmox-kernel-6.14* proxmox-kernel-6.17.4-1-pve-signed* proxmox-kernel-6.14.11-4-pve-signed*...
-
Jjo_strasser replied to the thread Proxmox install on Minisforum ms-01.Hi, yes I´ve two of them running Proxmox 9.1.x (latest). Is a great hardware but heating well ;)
-
Ddaanw replied to the thread Unable to remove kernel.Ok, another problem is the rH state (removed, half-installed) of proxmox-kernel-6.8.12-12-pve-signed. The post removal script for that kernel also seems to fail because your EFI is full so it's a bit chicken and egg. If you only want to keep...
-
CCIRE replied to the thread Stockage Type.Thank you all for the information. Another question: what type of RAID should I choose for my bay Lenovo DE2000h?