Latest activity
-
Cchrispage1 replied to the thread [SOLVED] VM firewall rule having no impact?.Ok, so after a little digging around, my Proxmox Firewall service was reporting the below: May 18 16:17:11 pve02 proxmox-firewall[5138]: error updating firewall rules: cannot execute nftables commands May 18 16:17:16 pve02...
-
Ddaanw replied to the thread shutdown time.Seems quite long to me but it obviously depends on the slowest shutdown in the chain. Did you already look into the shutdown time of each separate VM/LXC/host?
-
Falk R. replied to the thread Konsolenzugriff über WebGUI.Hi das passiert eigentlich nur wenn man Spice aktiviert hat und keinen Viewer auf dem Client installiert. Sonst einfach NoVNC auswählen, das kann jeder Browser. -
LLeopold31 replied to the thread Proxmox Backup Server 4.2 released!.Follow up. So I noticed an update to the kernel 7 to 7.0.2-2-pve, so I tried it on my PBS with the enterprise subscription (HP, gen 11). It's newer hardware so I figured it might be OK. And it has been fine. So I might try the newer kernel on...
-
RFrom the top of my head: you need to configure your SSH client (/root/.ssh/config) as well and set special entries for the IP and the hostname of your other nodes, e.g. Host proxmox1 proxmox2 proxmox3 Port 2222
-
NNemesiz replied to the thread Migration failed and loop trying again.node1 May 18 09:28:13 nmz-cl-1 systemd[1]: Stopping pve-ha-lrm.service - PVE Local HA Resource Manager Daemon... May 18 09:28:14 nmz-cl-1 pve-ha-lrm[754284]: received signal TERM May 18 09:28:14 nmz-cl-1 pve-ha-lrm[754284]: got shutdown request...
-
DIt does look like a false-positive to me. The file that gets flagged is the statically linked init executable of LXC (/usr/bin/init.lxc.static), which can probably trip up some scanners. Unfortunately, there are no details other than "something...
-
Ddaanw replied to the thread PVE upgrade 6.4 to 7, 8, 9....PVE7 is based on Debian 11/bullseye, PVE8 on 12/bookworm and PVE9 on 13/trixie. It seems all 3 repositories you need are still available for both Proxmox and Debian: http://download.proxmox.com/debian/pve/dists/...
-
Tthe_MiCrO replied to the thread Kernel Message: Unexpected gfp (PBS 4.2.0 / Kernel 7.0.2-4-pve).zfs --version zfs-2.4.2-pve1 zfs-kmod-2.4.2-pve1
-
Cchrispage1 posted the thread LXC Boot and vzdump Failures on Ceph RBD after Upgrade: fsconfig() failed ... Can't lookup blockdev (Exit Code 32) in Proxmox VE: Installation and configuration.Hi, After all of the CVE's and security disclosures over the past week or two, I thought it'd be useful to upgrade my Proxmox nodes to the latest. I recently updated everything to PVE 9 & Ceph 19 and it has been working without fault for a few...
-
YaZoal replied to the thread Unexpected reboot.I have taken a look at the provided log, the log does not show any kernel panic, OOM, or thermal event logged. I would suggest to double check iDRAC/IPMI logs for evidence of hardware reset or power event. -
Aalexe replied to the thread [SOLVED] SpamAssassin custom rules (/etc/mail/spamassassin/custom.cf) are not working.Where is the custom.cf.in directory located?
-
Cchrispage1 replied to the thread [SOLVED] VM firewall rule having no impact?.Thanks, although this is still empty: root@pve02:~# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination...
-
Tthadd2002 replied to the thread [SOLVED] Issues installing from usb.I removed the nvme device, disconnected cd drive, front usb, front card reader etc. then disabled tpm setting (I think that's what it was) in bios. Then problem solved.
-
G_gabriel replied to the thread [SOLVED] VM firewall rule having no impact?.is not enough to show nat/PREROUTING rules. what about ? iptables -t nat -L
-
dcsapak replied to the thread Opentelemetry metrics format..no, AFAIK the open telemetry plugin in PVE only supports json currently. -
G_gabriel replied to the thread [SOLVED] VM firewall rule having no impact?.not fix the issue but you can restrict Windows firewall rule to your LAN scope.
-
Cchrispage1 replied to the thread [SOLVED] VM firewall rule having no impact?.So nodes upgraded and rebooted, still seems to be a problem. I've cross checked the configurations across all nodes and Host > Firewall settings are exactly the same. I've run iptables -L and they are all empty.
-
Bboisbleu replied to the thread Lenovo MiniPC - Proxmox stürzt ab?!.Um mal zum Thema zurückzukommen: ich würde als erstes ein BIOS-Update machen (gibt ein neues aus 03/2026) und danach die Defaultwerte setzen. Dann alles durchschauen, ob irgendwo eine Einstellung ist, die Probleme machen könnte. Bitte vorher...
-
cheiss replied to the thread VM's not being moved over OpenFabric.Great! Please just mark the thread as SOLVED by editing the first post - this helps others find this thread more easily when searching! :)
