Latest activity
-
Sstefanxinc posted the thread VM's not being moved over OpenFabric in Proxmox VE: Networking and Firewall.Hi All, I've setup open fabric on my 3 Node cluster which have 2 NIC's Each, 1 for Data (Internet Access etc..) and 1 for Open Fabric. Data NIC is 1G interface connected to a Mikrotik switch while the Open Fabric NICs are all 10G and connected...
-
-
JIch möchte jederzeit Zugriff auf mein NAS haben und dabei nicht von Proxmox abhängig sein. In meiner produktiven Umgebung virtualisiere ich daher weder die Firewall noch das NAS - Testsysteme hingegen können gerne virtualisiert werden.
-
JSo mache ich das im Prinzip auch. Mit je einem ZFS-Dataset pro späterem Samba Share kann man ZFS Features ggf. sinnvoller nutzen als mit der "alles in einen Topf" Taktik. Getrennte Snapshots von Shares, Quotas, Abfrage tatsächlich belegter...
-
JJohannes S replied to the thread Fragen zu LVM SSD-Cache.Eine andere Option wäre einen relativ günstigen Server aus der Serveraktion mit ausreichend viel Platz für VMs zu nehmen und für größere Datenmengen dann eine Storagebox im gleichen RZ über nfs/cifs als Grab für große Datenmengen einzubinden...
-
Oozgurce.ozturkce posted the thread [SOLVED] Proxmox VE "pve-no-subscription" update fails. in Proxmox VE: Installation and configuration.Hello everyone; First of all, I know this topic has been opened many times. However, I still couldn't find a solution. The update problem started with the Proxmox VE 9.0 version that was previously installed on the server I use at home. Couldn't...
-
-
Ddeebsr replied to the thread Dutch Proxmox Day 2026.Will the presentations be recorded and available after the event?
-
DHi guys! As some of you might know we are organizing the Dutch Proxmox Day again. Last year we decided to reach beyond our borders and have all presentations in English. Which was a great success since almost half of the audience consisted of...
-
Aaklj_ekj replied to the thread Server-Disk I/O delay 100% during cloning and backup.Then it's not this. In my case it hangs, I can't even reboot via gui or ssh - only with the commands I've wrote above a reboot worked.
-
DHi guys! As some of you might know we are organizing the Dutch Proxmox Day again. Last year we decided to reach beyond our borders and have all presentations in English. Which was a great success since almost half of the audience consisted of...
-
Ggargakumar replied to the thread [solved] Kernel Panic when upgrading from pve 9.1.6 to 9.1.9 (kernel 7.0.x) - amdgpu drivers.I was previously running amdgpu/30.20.1. Tried updating to the current latest stable version : amdgpu/30.30.3 This new version built fine on 6.17.x kernels but failed on the 7.0.2 still :( So I guess I'm stuck with 6.17.x for now, right ...
-
TTander reacted to patchrick84's post in the thread Problems with PCIe passthrough with two identical devices with
Like.
We did it, guys! Below is a screenshot from the e-mail thread with the kernel people in charge of PCI stuff. Looks like it’ll be in version 6.20!! -
NWelp, I did it. I maxed out of my PBS, version 4.1.0. I can't run prune or GC now, and I get this error: 2026-05-15T09:35:42-06:00: TASK ERROR: atime safety check failed: update atime failed for chunk/file...
-
-
Mmicneu replied to the thread Bester Weg für Fileserver (samba).Ich möchte jederzeit Zugriff auf mein NAS haben und dabei nicht von Proxmox abhängig sein. In meiner produktiven Umgebung virtualisiere ich daher weder die Firewall noch das NAS - Testsysteme hingegen können gerne virtualisiert werden.
-
bbgeek17 replied to the thread Dutch Proxmox Day 2026.Happy to hear about this! There is always a lot of good feedback from this gathering! Sincerely, Blockbridge Team. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
JJohannes S reacted to fabian's post in the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026! with Like.
shim 16.1 mit beiden signaturen ist nun auf pve-test verfuegbar!
-
Ssoapee01 replied to the thread Delimiter Processing.Logs won't help. It's a custom configuration question. It's explained very well (imho). Is there something that needs clarification?
-
Ggargakumar replied to the thread [solved] Kernel Panic when upgrading from pve 9.1.6 to 9.1.9 (kernel 7.0.x) - amdgpu drivers.Reading further, I have at least one issue in this part of the initramfs build logs : I'll got try and find AMD GPU drivers for 7.0.x to see if it could resolve the issue. etting up smartmontools (7.5-pve2) ...
-
Ggargakumar replied to the thread [solved] Kernel Panic when upgrading from pve 9.1.6 to 9.1.9 (kernel 7.0.x) - amdgpu drivers.Hi. It think my boot partition is ok. df -h Filesystem Size Used Avail Use% Mounted on udev 30G 0 30G 0% /dev tmpfs 5.9G 3.7M 5.9G 1% /run /dev/mapper/pve-root 44G 29G 13G 70% /...
-
JJohannes S reacted to Pavel Tide's post in the thread Problem with worker VM start initiated by Veeam on PVE with Like.
Hello everyone, In addition to issuing the aforementioned fix on Veeam's side, we have also filed a proposal to adjust a few more things. There also remains an open question: why exactly do the VMs hang during startup? If anyone is willing to...
-
JJohannes S replied to the thread Linux VM 100% RAM usage -> suggestion.https://forum.proxmox.com/threads/fabc-why-is-proxmoxve-using-all-my-ram-and-why-cant-i-see-the-real-ram-usage-of-the-vms-in-the-dashboard.165943/
