Latest activity
-
TTheJalepenoKid posted the thread Mac addresses keep dropping from mac-address table. Unstable in Proxmox VE: Networking and Firewall.3x Dell R740. storage/cluster happens over mellanox 40GBe on Nexus 9332 in VPC via BOND0. Vlan2 Management happens over eno3 (intel 4 port PCIe) on Catalyst 3850. Vlan50. SVI Vlan 50 is gateway. IP routing enabled, laptop host pings and...
-
Sshactheorb reacted to gfngfn256's post in the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues? with
Like.
You can use anything, that can run Linux, as a QDevice - such as a Raspberry Pi. Seems like you got sorted. Maybe mark this thread as Solved. At the top of the thread, choose the Edit thread button, then from the (no prefix) dropdown choose Solved. -
Ggfngfn256 reacted to fiona's post in the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk with Like.
@r.wegmann which version of QEMU do you have installed? This seems like the regression in the original package for QEMU 11 that has been fixed with pve-qemu-kvm=11.0.0-2: pve-qemu-kvm (11.0.0-2) trixie; urgency=medium * fix regression when...
-
Ggfngfn256 replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.You can use anything, that can run Linux, as a QDevice - such as a Raspberry Pi. Seems like you got sorted. Maybe mark this thread as Solved. At the top of the thread, choose the Edit thread button, then from the (no prefix) dropdown choose Solved.
-
Aalexskysilk replied to the thread [SOLVED] My proxmox stopped responding in the browser (web interface)..post the output of systemctl -l --no-pager status pveproxy
-
OOnslow replied to the thread [SOLVED] My proxmox stopped responding in the browser (web interface)..Welcome, @mar144 What, exactly, did you do before it stopped?
-
CCCProx replied to the thread Migrate Windows AD Domain Controller to Proxmox.@ How did it go?
-
Mmar144 posted the thread [SOLVED] My proxmox stopped responding in the browser (web interface). in Proxmox VE: Installation and configuration.Good afternoon, My proxmox stopped responding in the browser (web interface). I recently didn't make any changes or change my IP address. I have already tried the services but without success. Does anyone have any information that could help me...
-
Mmar144 replied to the thread acesso a interface web do proxmox.Boa tarde, também estou enfrentando esse mesmo problema. Proxmox não responde no navegador. Eu não fiz alterações recentes, configurações de redes permanecem as mesmas. Alguém tem alguma ideia que pode ajudar?
-
Oomega posted the thread Opentelemetry metrics format. in Proxmox VE: Installation and configuration.Hello, I'm trying to set up OpenTelemetry on PVE 9.1.9 to send data to VictoriaMetrics, and I'm getting the following error: /opentelemetry/v1/metrics; json encoding isn't supported for opentelemetry format. Use protobuf encoding I haven't found...
-
Sshactheorb replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.Also thanks for letting me know!! Didn't realize my setup was that far from the network requirements, user error on my part. No way for me to get a better internet service for the buildings (once again whining about xfinity being the only real...
-
Aanbischo reacted to fiona's post in the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now with Like.
There is a new QEMU 11.0 package available in the pve-test and pve-no-subscription repositories for Proxmox VE 9. After internally testing QEMU 11.0 for over two weeks and having this version available on the pve-test repository for over a week...
-
Sshactheorb reacted to gfngfn256's post in the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues? with Like.
You'll have a "cluster" in one building with only 2 nodes - that is also a no-no!
-
Sshactheorb reacted to gfngfn256's post in the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues? with Like.
From the docs: I'm surprised your cluster ever sees all of the nodes!
-
Sshactheorb reacted to gurubert's post in the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues? with Like.
Ping times are way too high for corosync. And do I read that correctly that there is an Internet connection involved? Do you use some kind of VPN between the sites? As can be seen with the round trip times (rtt min/avg/max/mdev =...
-
Sshactheorb replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.Oh sorry, forgot to mention that I also have a couple of decommissioned low power tiny desktops (incompatible with win11), and I'd plan on using one for this
-
KHallo zusammen, komme nicht so richtig weiter mit einer Nut-Installation auf einem Proxmox Host. Ich habe die Anleitung von einem Kollegen bekommen, der es so bei sich auch im Einsatz hat, aber so richtig will es nicht laufen. Das System fährt...
-
NStill running R620s and R720s and they work fine with Intel X520-DA2, you can get the real Intel NICs from eBay for $25/ea
-
fba reacted to UdoB's post in the thread Is there a way (or a guide) to build Proxmox without just installing Proxmox? with Like.
Each of those (sub-) projects has its own documentation, usually good ones. Just read it, build one/two/three test-setups and learn how to debug them. Then combine everything to build a usable whole, emulating PVE. Theoretically that's no... -
Rriahc3 replied to the thread Is there a way (or a guide) to build Proxmox without just installing Proxmox?.Editing the hosts file Modifying repos Creating network bridges Removing the Debian kernel.... All of these are good and basic lessons for a entry level admin who never dealt with Proxmox :)