Latest activity
-
Additionally, with just 3 nodes in a ceph cluster, make sure you have at least 4 OSDs in each. Because with just 2 per node, you will likely have issues if one of the OSDs fails. As then Ceph will recover the lost replicas to the only node it can... -
DDeakia posted the thread [SOLVED] Help adding existing Volume to new container in Proxmox VE: Installation and configuration.I have recently reset my Proxmox instance, and have a 1TB secondary drive that contained media, I had it mounted to /mnt/media using "Directory" in my datacenter's Storage settings. I just remounted the drive and it is not appearing under "CT...
-
-
AArtisticB reacted to fba's post in the thread PBS Backup Traffic bei Ceph/PBS auf einer PVE node with
Like.
Die Bevorzugung einer lokalen Replica betrifft nur Lesevorgänge. Für's Schreiben bleibt die Primary OSD der PG verantwortlich -
AArtisticB replied to the thread PBS Backup Traffic bei Ceph/PBS auf einer PVE node.Vielen Dank für die Klarstellung damit ist mir sehr geholfen! Das bedeutet das dies bei Anpassung wie gedacht durchaus seine Vorteile haben kann wenn Sizing und die besagten Sicherheitsaspekte kein Problem darstellen. Hoffe das war eine für...
-
Rrefuge9 replied to the thread Replaced hard drive in RAID5 that was throwing SMART errors, now cannot mount LVM.'Journalctl -xb' is showing some odd errors:
-
TTechnomancer22 posted the thread ZFS pool and free space allocation in Proxmox VE: Installation and configuration.Hello everyone, first time poster here. I have a ZFS pool that has 878GB Free, with 1.22TB Allocated. I have been trying my best to figure out how to release that free space into the pool itself. Any help would be appreciated, Ill post the...
-
Rrefuge9 posted the thread Replaced hard drive in RAID5 that was throwing SMART errors, now cannot mount LVM in Proxmox VE: Installation and configuration.My ProxMox server was running fine off a five disk hardware RAID5, (LSI/AVAGO MegaRAID). One drive was throwing SMART errors, so I shut the VMs and Servers down, and replaced the drive. After the drive was rebuilt, and the server booted back...
-
WWolfAURman_IKrell reacted to Hannes Laimer's post in the thread Can I run prometheus node-exporter on proxmox VE (host) with Like.
Hey, maybe take a look at [1], might be helpful. If you encounter any problems just post again here. [1] https://forum.proxmox.com/threads/proxmox-prometheus-exporter-questions.74862/post-334340
-
Mmeyergru reacted to Johannes S's post in the thread Is there a way (or a guide) to build Proxmox without just installing Proxmox? with Like.
There is also an updated guide for Trixie: https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_13_Trixie I don't see much benefit for understanding everything by making the Installation more envolved. The Debian route is more for special...
-
Hharunk posted the thread [SOLVED] S3 Hetzner Garbage collect fails with `error reading a body from connection` in Proxmox Backup: Installation and configuration.Hello, we have backup configured to Hetzner and the backup job itself is working without fail. The issue is with the garbage collection job that keeps failing most of the time. The logs are as follows ``` 2026-05-12T02:30:01+02:00: Start GC...
-
TTErxleben replied to the thread Connection error 596.Du könntest dir trotzdem die Mühe machen, deinen Beitrag wenigstens maschinell ins Deutsche zu übersetzen, oder sie gleich in die parallele Englischabteilung zu stellen. Darum antworte ich hier auch auf Deutsch und nicht auf Englisch. Wenn dich...
-
fba replied to the thread PBS Backup Traffic bei Ceph/PBS auf einer PVE node.Die Bevorzugung einer lokalen Replica betrifft nur Lesevorgänge. Für's Schreiben bleibt die Primary OSD der PG verantwortlich -
BBurkhard Linke replied to the thread EVPN, IPv6 and routed underlay.Hi, I was able to dig a little it deeper into this. It seems that on the two new nodes, instances are only announced with their link local addresses: proxmox-sr4-1.intra# show bgp evpn route BGP table version is 3, local router ID is...
-
TSee also https://forum.proxmox.com/threads/connection-error-596.183444/ Btw, "Proxmox VE (Deutsch/German)" is for German support...
-
MMudgee Host replied to the thread Old standalone PMG - how to shift to a modern cluster.thanks Stoiko, that sounds straightforward, just need to build up some tests. out of interest, are we expecting a 9.1 soon?
-
Ggasherbrum replied to the thread [SOLVED] cannot take snapshot: local ZFS uses raw for vdisks / cannot change to qcow.click the snapshots tab, then click take snapshot
-
AArtisticB replied to the thread PBS Backup Traffic bei Ceph/PBS auf einer PVE node.Vielen Dank für die schnelle Antwort! Das bedeutet dann aber das jeder Ceph Lese-/Schreibvorgang initial auf der Node mit PBS laufen würde/müsste wenn ich das richtig verstehe? Ob dies in der Performance nicht einen Negativeffekt hat, wenn nur...
-
Dd.oishi replied to the thread [SOLVED] cannot take snapshot: local ZFS uses raw for vdisks / cannot change to qcow.local-zfs uses the zfspool backend, so VM disks are stored as ZFS volumes/datasets in raw format. Not being able to select qcow2 there is expected. Snapshots on local-zfs are not qcow2 internal snapshots; they are provided by the ZFS storage...
-
Pproxuser77 reacted to othenone's post in the thread Moved SSD from one motherboard/pc to another -> Higher temperatures and fan speeds with Like.
Alot of suggestions already, thank you! To answer some of the comments above: - I have not done any custom tuning on the previous server. And as @proxuser77 says, all suggestions are welcome, Proxmox specific ones, but also BIOS and hardware...
-
Mmosespray replied to the thread community.proxmox.proxmox_kvm not setting VLAN Tag on update.Thank you. My apologies.
