Latest activity

What's new Featured content New posts New profile posts Latest activity
  • UdoB
    UdoB reacted to a.woll's post in the thread [SOLVED] Nach Update auf v9.0.7 UI zerschossen. Ich bitte um Hilfe. with Like Like.
    Ich habe den Fehler beheben können. Aus unbekanntem Grund fehlte nach dem Update der dbus.service. Kaum neu installiert, funktioniert es wieder.
  • dcsapak
    dcsapak replied to the thread Unable to get Arc Pro B50 to function.
    can you please post the complete journal output from the last boot (journalctl -b) ? maybe we can see more what might be an issue? i have an arc pro b50 here in my workstation and after updating the firmware it works fine
  • fiona
    fiona replied to the thread LXC Container do not start after latest Kernel Upgrade to 7.0.2-2.
    Hi, please share the system journal from the problematic boot. What output do you get when you run the following commands? systemd-tmpfiles --dry-run --create 2>&1 | grep pve systemd-tmpfiles --cat-config | grep pve pveversion -v
  • UdoB
    UdoB replied to the thread enterprise license.
    As so often: it depends. If I run a company and I my services infrastructure is used in my office to make money and I want that to be possible with ~99.9 percent reliability (that's one workday per year) then I use the better tested...
  • fiona
    fiona replied to the thread PROXMOX 8.3.0 hangs for no apparent reason.
    Well, it seems you already rebooted another time, since the log starts at May 05, so you need to replace the -1 in the command with the number of boots since the issue. Not sure if related to the other issue, but in the log I can see: May 07...
  • UdoB
    UdoB reacted to leesteken's post in the thread enterprise license with Like Like.
    It's not a license (which is a legally very different thing) but a (support) subscription. The no-subscription repository is a little less time-tested and gets features and bugfixes sooner and more often. If there is a problem then it's usually...
  • M
    mrpops2ko replied to the thread SR-IOV VFs don't go down when the PF goes down.
    erm theres a command in the intel documentation which goes over this https://github.com/intel/ethernet-linux-i40e Enabling a VF link if the port is disconnected ---------------------------------------------- If the physical function (PF) link...
  • N
    ninad posted the thread Bridge stops forwarding packets over the bond. in Proxmox VE: Networking and Firewall.
    Dear All, I have a 5-node hyperconverged Proxmox cluster on a Dell R7525 with 2x2-port Intel E810 25G NICs. All these 5 nodes are connected to a stack of Extreme X695. Out of 4 ports, I have created bond0 with 2 ports and bond1 with the...
  • dcsapak
    dcsapak replied to the thread Ryzen 7 1700 random hard lockups, clean logs.
    had a very similar issue on my (launch) ryzen 1700, tried some things from https://wiki.archlinux.org/title/Ryzen but in the end the only thing that solved it was to replace the cpu with something newer...
  • UdoB
    UdoB reacted to Martin.B.'s post in the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem) with Like Like.
    It will be to see the difference of using ceph on lokal storage vs. PVE nodes without local storage and some kind of remote storage. If any of this will be used in future production environment there will not be much "load" on it. Not CPU nor...
  • S
    shfp79 replied to the thread PVE backups causing VM stalls.
    Finally we had to change the Storage to SMB/CIFS to get rid of the stucking VMs while backing up.
  • W
    wagnbeu0 replied to the thread e1000e eno1: Detected Hardware Unit Hang:.
    I tried this morning to do an update to the new kernel 7.0, but again after some minutes the system became offline. SO when booting again with Linux 6.8.12-13-pve, the system remains online. Do we still have no idea about the root cause why some...
  • A
    acaceres216 posted the thread PBS 4.2.0: Wasabi giving 400 bad request error in Proxmox Backup: Installation and configuration.
    Hello, Recently i have updated PBS to 4.2.0 and i am unable to configure a Datastore pointing to a Wasabi Bucket. The endpoint is configured as follows (i removed "{{bucket}}" just to try): When i try to configure the datastore i see the...
    • S3.png
    • 1778484912451.png
  • R
    r.wegmann posted the thread enrolling MS KEK 2023 Fehlermeldung beim VMStart in Proxmox VE (Deutsch/German).
    Guten Tag, auf Hinweis beim Backup meiner Linux VM's habe ich versucht die VM's mit dem aktuellen MS KEK Zertifikat zu aktualisieren. Diese VM's welche mit secure boot konfiguriert sind entsprechend den Anweisungen im Log des Backup Task zu...
    • VM-103-HW-Status.png
  • M
    Mabene replied to the thread failed to parse TFA file.
    I just ran into a similar problem in a Proxmox 8 ==> Proxmox 9 update: After adding a V9 Node to the cluster, logging into the Web UI only worked on the new node, logging into the old nodes failed with the error: authentication failure...
  • dcsapak
    dcsapak replied to the thread Proxmox 9.1.7 RTX 6000 Pro drops off PCI bus.
    possibly, but hard to say with the data here. you could try things like disabling power state management (e.g. in the bios of with pcie_aspm=off on the kernel commandline) sorry if my last post was badly worded, what i actually wanted you to...
  • O
    onlyzeros reacted to Neobin's post in the thread zfs replication to all nodes with Like Like.
    For reference: https://bugzilla.proxmox.com/show_bug.cgi?id=5544
  • O
    onlyzeros replied to the thread zfs replication to all nodes.
    Thanks for the reply. I will look into this.
  • LnxBil
    LnxBil reacted to leesteken's post in the thread enterprise license with Like Like.
    It's not a license (which is a legally very different thing) but a (support) subscription. The no-subscription repository is a little less time-tested and gets features and bugfixes sooner and more often. If there is a problem then it's usually...
  • T
    triang reacted to Drthrax74's post in the thread Move backups from disk to disk with Like Like.
    Hello, I think is good idea to add to possibility to move backup to another storage by the GUI +1000
Show older items
Top Bottom
Back