Latest activity
-
Nninad posted the thread Bridge stops forwarding packets over the bond. in Proxmox VE: Networking and Firewall.Dear All, I have a 5-node hyperconverged Proxmox cluster on a Dell R7525 with 2x2-port Intel E810 25G NICs. All these 5 nodes are connected to a stack of Extreme X695. Out of 4 ports, I have created bond0 with 2 ports and bond1 with the...
-
dcsapak replied to the thread Ryzen 7 1700 random hard lockups, clean logs.had a very similar issue on my (launch) ryzen 1700, tried some things from https://wiki.archlinux.org/title/Ryzen but in the end the only thing that solved it was to replace the cpu with something newer... -
UdoB reacted to Martin.B.'s post in the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem) with
Like.
It will be to see the difference of using ceph on lokal storage vs. PVE nodes without local storage and some kind of remote storage. If any of this will be used in future production environment there will not be much "load" on it. Not CPU nor... -
Sshfp79 replied to the thread PVE backups causing VM stalls.Finally we had to change the Storage to SMB/CIFS to get rid of the stucking VMs while backing up.
-
Wwagnbeu0 replied to the thread e1000e eno1: Detected Hardware Unit Hang:.I tried this morning to do an update to the new kernel 7.0, but again after some minutes the system became offline. SO when booting again with Linux 6.8.12-13-pve, the system remains online. Do we still have no idea about the root cause why some...
-
Aacaceres216 posted the thread PBS 4.2.0: Wasabi giving 400 bad request error in Proxmox Backup: Installation and configuration.Hello, Recently i have updated PBS to 4.2.0 and i am unable to configure a Datastore pointing to a Wasabi Bucket. The endpoint is configured as follows (i removed "{{bucket}}" just to try): When i try to configure the datastore i see the...
-
-
Rr.wegmann posted the thread enrolling MS KEK 2023 Fehlermeldung beim VMStart in Proxmox VE (Deutsch/German).Guten Tag, auf Hinweis beim Backup meiner Linux VM's habe ich versucht die VM's mit dem aktuellen MS KEK Zertifikat zu aktualisieren. Diese VM's welche mit secure boot konfiguriert sind entsprechend den Anweisungen im Log des Backup Task zu...
-
-
MMabene replied to the thread failed to parse TFA file.I just ran into a similar problem in a Proxmox 8 ==> Proxmox 9 update: After adding a V9 Node to the cluster, logging into the Web UI only worked on the new node, logging into the old nodes failed with the error: authentication failure...
-
dcsapak replied to the thread Proxmox 9.1.7 RTX 6000 Pro drops off PCI bus.possibly, but hard to say with the data here. you could try things like disabling power state management (e.g. in the bios of with pcie_aspm=off on the kernel commandline) sorry if my last post was badly worded, what i actually wanted you to...
-
OFor reference: https://bugzilla.proxmox.com/show_bug.cgi?id=5544
-
Oonlyzeros replied to the thread zfs replication to all nodes.Thanks for the reply. I will look into this.
-
It's not a license (which is a legally very different thing) but a (support) subscription. The no-subscription repository is a little less time-tested and gets features and bugfixes sooner and more often. If there is a problem then it's usually... -
THello, I think is good idea to add to possibility to move backup to another storage by the GUI +1000
-
Nnetbela replied to the thread Deleting snapshots extremly slow and VM's freeze.I've tried installing the TrueNAS Proxmox plugin (https://github.com/truenas/truenas-proxmox-plugin) and was able to configure it with a different TrueNAS system for now (need to update my primairy one). It seems to work quite well and fast also...
-
For reference: https://bugzilla.proxmox.com/show_bug.cgi?id=5544
-
MMartin.B. replied to the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem).It will be to see the difference of using ceph on lokal storage vs. PVE nodes without local storage and some kind of remote storage. If any of this will be used in future production environment there will not be much "load" on it. Not CPU nor...
-
Oonlyzeros posted the thread zfs replication to all nodes in Proxmox VE: Installation and configuration.I have 3 node proxmox cluster with zfs storage and want to setup replication jobs but I have around 30 LXCs and can only setup one by one. I have LXCs in all 3 nodes and I want all LXCs replicated to all nodes. Is there a way of doing this...
-
Aa.woll replied to the thread [SOLVED] Nach Update auf v9.0.7 UI zerschossen. Ich bitte um Hilfe..Ich habe den Fehler beheben können. Aus unbekanntem Grund fehlte nach dem Update der dbus.service. Kaum neu installiert, funktioniert es wieder.
-
Ttheseris replied to the thread [TUTORIAL] Encrypted ZFS Root on Proxmox.It is going to sound as a stupid question but is it possible that a reboot revive an ancient bpool dataset each time? Because when I did a wipefs without a reboot, then I has been able to create the bpool dataset this time.
-
HFor reference: https://bugzilla.proxmox.com/show_bug.cgi?id=3347
