I haven't tried it yet, but it may now be officially supported.
Since the patches applied to the kernel have also been updated, I think you should apply both.
pve-kernel 7.0.2-1...
Hi!
thanks, i just found the problem. In my /etc/hosts existed a line with the external ipv6 address and name localhost, tcpdump on lo0 showed me that it tried to connect to localhost port 5900, but ss -latpn showed vnc listening on the external...
I wouldn't think so, but I am less familiar with Debian than I am RHel. I do run Ubuntu on my work laptop but I am used to doing actual server work in CentOS and ESXi.
As far as what happened last time, I got into a forum and asked a very...
Hi, just bumping this thread.
I’m still facing the issue and haven’t found a solution yet.
If anyone has experience with this, I’d really appreciate your input.
Moien, sorry dass ich mich etwas unklar ausgedrückt habe.
Also die komplette Installation meines Homeservers habe ich mit ki Hilfe bewerkstelligt.
Die ki hat mir die Reihenfolge der zu installierenden Container und Maschinen.
Mir wurde empfohlen...
1) These are NOT snapshots. These are backups.
It's not visible in this view, but as you're saying: two of them were created in "snapshot" mode, the third was created in "stop" mode.
2) You are mistaking snapshots and backups. They are very...
Moin,
ich verstehe deine Aussage oben nicht so ganz, du schreibst ...
In welcher Reihenfolge soll ich die Programme installieren? (ki hatte mir empfohlen nach proxmox, direkt opnsense zu installieren. Ich hatte aber das Gefühl dass das...
If your goal is to provide redundancy for two physical NICs and use multiple VLANs on them, Proxmox can do this without SDN in most cases.
A common approach is as follows:
Use bonding for NIC redundancy,
create VLAN interfaces on that bonding...
hi!
could you please run `ss -ltapn | grep 5900` exactly in those 10 seconds between "starting vnc proxy" and the "connection timed out" and post the result here, together with `ip a` (if you censor the output, please do so in a way that does...
der derzeitige shim ist nur mit dem "alten" microsoft key signiert (wie bei fast allen distros - microsoft signiert erst seit letztem herbst mit dem neuen key, und die review und submission prozesse sind langwierig), funktioniert out of the box...
der derzeitige shim ist nur mit dem "alten" microsoft key signiert (wie bei fast allen distros - microsoft signiert erst seit letztem herbst mit dem neuen key, und die review und submission prozesse sind langwierig), funktioniert out of the box...
Hmm This is 2 snapshots + 1"stop" backup of my Unifi-vm... The one today 05-06 14:12, its ran with "Stop" mode. The other 2 are snapshots. All same size?
@jim_os ob die neuen Zertifikate da sind oder nicht, wird im Moment nicht automatisch detektiert. Du kannst einfach trotzdem den enroll-Knopf benutzen, dann wird beim nächsten Anwenden der Config-Änderungen geschaut. Wenn alle Zertifikate da...
Hallo zusammen,
ich habe da mal ein paar Fragen bezüglich meines Homeservers.
Hardware.
HP elite mini g9 800 – 14500t – 16gb DDR5 – zweiter RJ45 über flexport -
Festplatte: 2x m² ssd 1x 256gb, 1x 1TB und eine ssd 480gb.
Software:
Proxmox...
Hallo Stoiko, ich möchte gerne 60 Tage lang die Logs einsehen, ist das so richtig?
/var/log/syslog
{
rotate 60
daily
missingok
notifempty
delaycompress
compress
postrotate
/usr/lib/rsyslog/rsyslog-rotate...
I wasted a lot of time trying to make PXE boot work, until I found this thread. Reading through this, I see that the RNG requirement is buried in the release notes somewhere, but this is a detail that most people are going to miss.
I really think...
Thank you so much for this, much appreciated !
Too bad there is no basic keyboard shortcut/combination which could allow the cursor to move on terminal screen and copy the text.