Latest activity
-
HHardknight replied to the thread unable to activate storage 'data' - directory.Hi Impact, Re-instate the mount, as I am unable to remove any VM or CT as I believe its still referencing the : mnt/pve/data file. Correct me if I'm wrong
-
Ssoftsuds replied to the thread [SOLVED] How to delete a VM or Container that has no storage and no or missing storage pool..Late to the party but all I did was: + Edit '/etc/pve/lxc/***.conf' + Change 'protection: *' to '0' + Then 'pct destroy *** --force'
-
HHardknight posted the thread unable to activate storage 'data' - directory in Proxmox VE: Installation and configuration.Hi all New to PM and Linux, but love the potential of it. Whilst exploring possibilities I inadvertently removed '/mnt/pve/data' from a partition. When selecting this disk, it displays unable to activate storage 'data' - directory is expected to...
-
-
Zzekeand replied to the thread Proxmox 9 cloud-init and Debian 13 (Trixie) fails to set DNS.Hi everyone. I recently found this issue when setting my homelab and I created a small workaround. It's a shell script that corrects the generated interfaces file by moving the DNS directives from the lo interface to the physical interface...
-
Ddigitalspaceport replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.This is the roughest upgrade yet since I have been using PVE, and I am reading similar reports here from many others. I think that is a valid observation of pain points the community is arising. It is valid for the community to express this.
-
Lluckman212 reacted to Lukas Wagner's post in the thread Proxmox Datacenter Manager 1.0 (stable) with
Like.
Subscription management is definitely on the roadmap, yes. I cannot give an ETA, but it's one of the features we want to implement sooner rather than later. -
Eezelkow1 reacted to andor_xor's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
I also have 3090s and nvidia MIT drivers 580.159.03 and neither of them are recognized with 7.0.0-3-pve Revert to 6.17.13-6-pve and its working fine. Side note for anyone who may stumble on this. I had nvidia drivers 580.105.08 installed when...
-
Kkagancengiz posted the thread Implementing vhost-user support in PVE for high-performance networking in Proxmox VE: Networking and Firewall.Hi everyone, We've been looking into ways to improve networking performance in our infrastructure, specifically for use cases that require user-space networking like DPDK or OVS. Currently, the lack of native vhost-user support in Proxmox VE is...
-
Ssnakeoilos reacted to NorViking's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
Update: Root cause found — HPET clocksource, not kernel 7.0 After further investigation, the high CPU usage was not caused by kernel 7.0 itself, but by the HPET (High Precision Event Timer) being used as the system clocksource. Using perf top...
-
HHydrant1512 posted the thread Proxmox VE 9.1 / ZFS 2.4.1: orphaned zvol destroy clears error temporarily, but txg_sync hangs in D state and reboot resurrected the orphan in Proxmox VE: Installation and configuration.Hello, I am looking for guidance on the safest next step for a single-node Proxmox VE host with a mirrored ZFS pool. At first my priority was to preserve data and avoid destructive recovery. That is still preferred. However, at this point I am...
-
DDenary posted the thread ha-manager and VM's with host passthrough in Proxmox VE: Installation and configuration.It's been a year and 8 months since I made a post on the previous topic. When you are passing through a PCIe or USB device regardless if you are using device mapping the current ha-manager only works if the situation is a node failure. More...
-
-
Ttemplar reacted to Kingster8400's post in the thread [SOLVED] Hetzner Proxmox with pfsense config with Like.
I'm stupid :D - just changed the firewall IP to .254 and it now works.. as the IP was being used by the interface. VM's can now access the internet and its being forwarded as it should.
-
Bbl1mp reacted to whostolemyname's post in the thread UID/GID mapping between host and lxc with Like.
Hi Lucas, thank you for sharing your thoughts. It seems, that the first approach (chown lxc-id_as_seen_from_host:lxc-id_as_seen_from_host /shared/directory/on/host -R) is "officially allowed" and not breaking the security mechanism of the...
-
Jjbeck66 replied to the thread Probleme mit apcupsd.Bist du dir sicher, dass das Gerät Back-UPS XS 950U heißt? Hast du mal enen Link? Ich finde nur BX950.
-
Jjohen reacted to MarkusKo's post in the thread Ubuntu-Server-VM in Proxmox-VE immer wieder plötzlich ohne Vorankündigung down with Like.
eventuell via journalctl -b nach oom events suchen oder dmesg -T | egrep -i 'killed process' oder grep -i 'killed process' /var/log/messages
-
Jjbeck66 replied to the thread Probleme mit apcupsd.Danke. Keine Ahnung wie ich an die FW Version komme. Ich habe aber auch nichts gefunden ob und wie man diese aktualisieren kann. Ich werde dazu mal bei Schneider anklopfen. Es gibt noch eine weitere Möglichkeit wie es zum Fehler kommen könnte...
-
G_gabriel replied to the thread Windows VM Freezing During Backup.Recommended and safest way is "local" PBS. Then a remote PBS can pull backups from local PBS without disturbing VM.
-
Rrex2020 replied to the thread Windows VM Freezing During Backup.Yes it's over the WAN. Thank you now I understand. I assumed the backup client too care of realizing if the PBS server was slow or fast and handling accordingly instead of killing io. I'll try fleecing.
-
HHaTaX replied to the thread PVE 6.0-7 + ixgbe firmware errors.Good call on pinning the version 6 kernel, I decided to give that a go as I got real tired of seeing the console filled with firmware error issues and I couldn't see anything else that might be noteworthy I should pay attention to. There was an...
-
Ppavlos replied to the thread Wake on lan for VM.apt install xxd
