Latest activity
-
CoolTux replied to the thread Restore von CT Backup funktioniert nicht.Ich glaube er meinte eher das Restore damit. Also so wie ich vorgeschlagen habe den Restore von Hand machen. Die Anleitung dafür hat er ja danach geschrieben. -
VVivienM replied to the thread Spontaneous reboots on Minisforum MS-A2 with 6.17 (and later 6.14).Tried the BIOS changes, it didn't help, spontaneous reboot after 24ish hours... Now trying with my NVMe SSD set to PCI 3.0 instead of 4.0.
-
Wwar59312 reacted to RolandK's post in the thread survey for "got inotify poll request in wrong process - disabling inotify" log message with
Like.
it does not do real harm. we have a ticket for this in bugzilla for a while: https://bugzilla.proxmox.com/show_bug.cgi?id=5177 -
JJohannes S reacted to d.oishi's post in the thread Recommended ZFS setup for Mini-PC with 2-3 SSD's with Like.
If you want to separate the data storage for capacity or management reasons, I think that would be perfectly fine. My understanding is that this hardware can only accommodate three SSDs in total, so in that case this separate data pool would not...
-
JJohannes S reacted to d.oishi's post in the thread Recommended ZFS setup for Mini-PC with 2-3 SSD's with Like.
Technically, it is possible to build a mirror or RAIDZ using a mix of SATA and M.2/NVMe SSDs. However, in a mixed setup, the performance characteristics are not uniform, and the overall behavior tends to be limited by the slower device. Since...
-
JJohannes S replied to the thread Restore von CT Backup funktioniert nicht.Naja, das finde ich keine gute Lösung, da die doch sehr umständlich und potentiell fehleranfällig ist. Hat es denn funktioniert OpenVPN in einen anderen Container zum laufen zu kriegen und diesen Container mit PBS zu sichern und...
-
JJohannes S replied to the thread All Helper Scripts Fail.I'm not sure I understand what you want to achieve. You could installProxmoxVE and ProxmoxBackupServer baremetal on the node and afterwards add it to the cluster but I wouldn't do this: Since every cluster member can login via ssh to the other...
-
JJohannes S reacted to CainDawson's post in the thread Probleme mit der Netzwerkkonfiguration mit Containers with Like.
Hallo, Entschuldigt, dass keine Antwort mehr kam von mir! Mittlerweile habe ich so weit alles im Griff, was die Netzwerkkonfiguration betrifft. Hier mal ein Überblick dazu: System & Updates Proxmox VE auf Debian Trixie installiert...
-
Aaking posted the thread Proxmox and Unifi VLAN Identification in Proxmox VE: Networking and Firewall.I have a Unifi Cloud Gateway with a Unifi switch, with a Proxmox VLAN setup for management at 192.168.8.0/24 (VLAN8). On the switch, I have VLAN8 set as the native untagged VLAN passing to my two Proxmox nodes. I am passing a few VLANs as tagged...
-
TTErxleben replied to the thread Restore von CT Backup funktioniert nicht.Moin OF. CTs sind grundsätzlich problematischer als VMs Rohdaten überprüfe ich wegen bösen Buben auch per rsync auch auf auffällige Anderungen das läuft dann aber komplett neben der Proxmox-Schiene Ein Rohdaten-Restore will man nur als...
-
MMeesoa replied to the thread [SOLVED] Proxmox refusing to ping to any network..I swapped the bridge ports between the two other NICs but they have made it so that the vmbr0 was set to DOWN instead of UP like it normally is when connected with the nic0, I assume that means the nic0 is the correct one or I messed up the swap...
-
UdoB replied to the thread [SOLVED] Proxmox refusing to ping to any network..Are you sure that nic0 is the correct network interface and it is actually connected? It is listed as "state UNKNOWN" in the last screenshot. If you actually have three NICs just try the other two. You need to get "state UP" for both the bridge... -
LLongQT-sea replied to the thread Almost got to bind back Intel iGPU from VM to host (laptop) upon VM shutdown, how to diagnose what's missing?.Take a look: https://github.com/LongQT-sea/intel-igpu-passthru/blob/main/pve_rebind_pci.sh
-
MMeesoa posted the thread [SOLVED] Proxmox refusing to ping to any network. in Proxmox VE: Networking and Firewall.As the titles said, I've spent the last day tinkering with a brand new homelab that refuses to work with me... Essentially I have a small server running on a asrock motherboard that allows me to oob into it where I've installed Proxmox...
-
-
Ppaase84 replied to the thread [SOLVED] Beherrscht PMG v9.0.6 kein ARC-Signing?.auch wenn es solved ist. ARC kann man gut auf einem linux server (postfix mit rspamd) machen. ich hab dazu eine /etc/rspamd/local.d/arc.conf erstellt. sign_local = true; try_fallback = true; sign_symbol = "ARC_SIGNED"; # Empfohlene...
-
Ddirhea replied to the thread LXC backups are failing when the container includes snaps.Stopping it does work. In fact looking at how /proc/ works it seems a bit strange that Proxmox is trying to back it up at all. I have the VMs backed up externally through another tool and it's all excluded there, and it isn't where snap should be...
-
UdoB reacted to jdancer's post in the thread 9.1.1 Installation issue with PERC H730 Mini with Like.
Dell HBA330 mini-mono versions are definately for 13th- and 14th-gen Dells. For 12th-gen Dell PERCs (H310/H710/H710P/H810), use https://fohdeesha.com/docs/perc.html. No issues in production. Do NOT skip any steps and take your time. If you want...
-
OObviously Forced replied to the thread Restore von CT Backup funktioniert nicht.Hallo TErxleben, wie man ein teilweises Restore (z.B. wie meine Schritte im vorigen Post) überprüft ist eine sehr gute Frage. In diesem Fall ist es eine Mischung aus: 1. Bevor man ein Restore beginnt macht man ein Backup und prüft die...
-
CCainDawson replied to the thread Probleme mit der Netzwerkkonfiguration mit Containers.Hallo, Entschuldigt, dass keine Antwort mehr kam von mir! Mittlerweile habe ich so weit alles im Griff, was die Netzwerkkonfiguration betrifft. Hier mal ein Überblick dazu: System & Updates Proxmox VE auf Debian Trixie installiert...
-
Jjdancer replied to the thread 9.1.1 Installation issue with PERC H730 Mini.Dell HBA330 mini-mono versions are definately for 13th- and 14th-gen Dells. For 12th-gen Dell PERCs (H310/H710/H710P/H810), use https://fohdeesha.com/docs/perc.html. No issues in production. Do NOT skip any steps and take your time. If you want...
