Latest activity
-
PYou should be able to change IPs from the pfSense console. Or since it's a VM just reinstall. I would plan out your network layout first though...pfSense WAN should connect to only your ISP. pfSense LAN should connect to your network. There...
-
SteveITS replied to the thread setting up my pfsense router.You should be able to change IPs from the pfSense console. Or since it's a VM just reinstall. I would plan out your network layout first though...pfSense WAN should connect to only your ISP. pfSense LAN should connect to your network. There... -
VVanishingEntropy reacted to leesteken's post in the thread Ubuntu 26.04 (resolute) Failed to start systemd-networkd-wait-online.service with
Like.
systemd-networkd-wait-online seems to not work on recent Linux distributions (mostly based on Debian like Ubuntu) on Proxmox, but previous reports have been mostly on containers (instead of a VM)... -
VVanishingEntropy replied to the thread Ubuntu 26.04 (resolute) Failed to start systemd-networkd-wait-online.service.It might be useful if in the cloud-init config could specify the interface name. Unsure though. On the second boot I don't get the error but I do get strangeness. In the boot log I see: [ 8.024866] cloud-init[1323]: Cloud-init v...
-
Sstn replied to the thread PROXMOX 9 GPU PASS THROUGH.I'm running a debian 13 vm with a mapped PCIe device (Nvidia RTX2000) and everything (just video encoding so far no output) works so far. UNTIL When I try to to increase the ram allocation of the vm it refuses to start. The vm is shown as...
-
aaron replied to the thread Proxmox with ceph performance.The HW looks good so far. If I understand it correctly, the PVE hosts connect to the Ceph cluster via 25Gbit/s? While the Ceph nodes themselves use 100Gbit/s? I would verify that the network performs as expected, as in, do iperf / iperf3 checks... -
BBrave_skykorn replied to the thread setting up my pfsense router.wait a minute i messed up again. so I went through the setup wizard and i set the static ip to be the same as my lan. how do i fix this?
-
BBrave_skykorn replied to the thread setting up my pfsense router.thank you so much. i disabled the firewall rules and now i can connect with wan. I will just quickly configure it and get it secured. thank you so much for helping me.
-
Mmason64 replied to the thread Is it possible to have the second nic on my server to be used to access the GUI when the first nic goes down.@woma Thank you for all the information i will give that a go shortly and let you know how I get on.
-
MMarkusKo replied to the thread Netzwerkarte hängt sich seit letzem Update nach einer gewissen Zeit auf.Ich glaube die Einstellungen sind auf die nic0 anzuwenden.
-
CChrisTG74 posted the thread Feature request: Display some information instead of blank screen if quarantine-link is expired in Mail Gateway: Installation and configuration.I got informed by a user that the quarantine-page does not load for her. It turned out, that the link already was expired, so the items in that spam notification email did no longer exist. Since this is a situation that is "by design", I would...
-
-
G_gabriel reacted to Johannes S's post in the thread Migrating VMware VMs with PVSCSI and EFI disk with Like.
The scripts from croit and Falk are basically doing the same if I didn't miss something. So it should work either way to activate the virtio drivers.
-
G_gabriel replied to the thread Migrating Windows to Proxmox/Virtio SCSI single device without intermediary IDE/sata boot drive.@Falk R. made an "install.bat" script which use the devcon.exe Microsoft utility to create the phantom/fake scsi controller. This allow booting directly in PVE with Virtio SCSI disk. Just tried today. Download the virtio win mod drivers ISO ...
-
G_gabriel reacted to ThomasGlanzmann's post in the thread Migrating Windows to Proxmox/Virtio SCSI single device without intermediary IDE/sata boot drive with Like.
Hello, I get often asked by customers how to install the virto drivers before the migration in a way that they can be immediatly be used with virtio scsi single devices without an intermediary boot using an ide drive and an empy virtio scsi...
-
CoolTux replied to the thread Restore von CT Backup funktioniert nicht.Ich fürchte da wird Dir nur ein manueller Restore per FUSE-Mount & Rsync übrig bleiben. -
Uuzumo replied to the thread Problem with MegaRAID SAS3508 controller.I’ve never had any problems using the 9500-16i... If the problem doesn't occur when you don't use IR Mode, isn't that the solution?
-
Hharry1983 replied to the thread [SOLVED] Gibt es ein Problem mit den aktuellen Updates in 9.1.9?.Das war eine Configzeile wo ich AppArmour etwas begrenzt hatte lxc.apparmor.profile: lxc-container-default-with-nesting
-
Oodobrev replied to the thread Problem with MegaRAID SAS3508 controller.Hi. Another victim here, I've got two Supermicro PBS servers with MegaRAID 9540-2M2 for boot drives with the same problem. Bricked one, had to reinstall with 4.0-1, pinned kernel 6.14 and did the update / upgrade to 4.1.8 with kernel 6.17...
-
BBad_Dawg replied to the thread [SOLVED] S3 datastore error.I came here to say the same - ditto. My "S3" bucket is actually Backblaze's B2B, but same issue as OP.
-
BOkay, so for some reason this does not contain the correct header, the expected output would be 0000000 6ee0 fc58 4d1a 05b4 0000 0000 0000 0000. Please set the maintenance mode offline on the s3 datastore, remove this file and bring the store...
