Latest activity
-
MMickyF replied to the thread [SOLVED] Gibt es ein Problem mit den aktuellen Updates in 9.1.9?.OT - welche Config ist das genau?
-
DDantelWandis33 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Kernel 7.0.0-2 running good.
-
Aandylee01 replied to the thread PBS Performance improvements (enterprise all-flash).Yes I appreciate the benchmark targets very specific stages of the backup data pipeline, however I believe the under performance of backups in my environment lie in these stages, so I'm using it to help guide my investigation. Thanks for the...
-
TTafkaMax posted the thread 3 node proxmox link failure, reboots node even when second link is up in Proxmox VE: Networking and Firewall.Hi I have an interesting question regarding a small proxmox cluster. 1. Background I have a 3 node proxmox cluster, that has internet/switch facing NIC in a bond and a second NIC that does a simple peer-to-peer link. E.g. prox-01 <-> prox-02...
-
TTBF IT replied to the thread [SOLVED] RAIDz2 zpool not showing full capacity after zpool attach.It is really sad that it seem to be still a NOT solved problem. We also tried the exact same way, but it isn't possible to get the correct size in pool/vdev after attaching. If i see the posts in other forums, like truenas it doesn't seem a...
-
BBigD replied to the thread Hilfe nach SAS Controller Tausch - ZFS Pool ist nicht mehr da.Wichtige Dinge liegen als Kopie auf einem anderen Laufwerk, dann noch auf einer externen Platte und parallel bei Google. (3-2-1)
-
Wwoma replied to the thread Angaben in Backupjobs.Clusterweite Tasks - ohne direkten Bezug zu VM/CT oder Node - sind also anonym unterwegs und man kann im Moment nur an den ausgeführten Kommandos Rückschlüsse auf den Auftraggeber des Tasks ziehen. Verstehe ich das so richtig?
-
Ssantiagobiali reacted to ThomasGlanzmann's post in the thread Migrating Windows to Proxmox/Virtio SCSI single device without intermediary IDE/sata boot drive with
Like.
I see, with the method above, you don't need safeboot. You shut it down on VMware, you start it on proxmox with virtio scsi single device and the only thing left todo is set the ip address, if the address was static defined before. So it is only... -
cwt reacted to ThoSo's post in the thread Hilfe nach SAS Controller Tausch - ZFS Pool ist nicht mehr da with Like.
Ich denke, die nächste Herausforderung wird wohl eher das BACKUP sein - wie aus deinem ersten Beitrag hervorgeht gibt es hier wohl keines! -
TThomasGlanzmann replied to the thread Migrating Windows to Proxmox/Virtio SCSI single device without intermediary IDE/sata boot drive.I see, with the method above, you don't need safeboot. You shut it down on VMware, you start it on proxmox with virtio scsi single device and the only thing left todo is set the ip address, if the address was static defined before. So it is only...
-
Bbuwzim replied to the thread OICD logout not working.Hello, connect a VE 9.1.9 to Keycloak 26.5.5 for OIDC auth and still missing a backchannel logout if the user logged out. Something news here? Best regards Rene
-
Ssantiagobiali replied to the thread Migrating Windows to Proxmox/Virtio SCSI single device without intermediary IDE/sata boot drive.On my notes on migrating from sata to scsi there is a step that you must boot into safeboot first, disable safeboot and reboot or you get a bsod. bcdedit /set {default} safeboot network shutdown -s -t 0 -f (shutdown) Change the disk from sata...
-
Ttippers posted the thread Change QDevice to Raspberry Pi 2 failing in Proxmox VE: Installation and configuration.I have a 2 node cluster with a QDevice running on Ubuntu 22.04 on a repurposed desktop PC. I want to change this to a Raspberry Pi 2 which has Ubuntu 22.04 installed. I have removed the existing QDevice from the cluster but when I try to add the...
-
Dhttps://bugzilla.proxmox.com/show_bug.cgi?id=2287
-
MmipsH posted the thread FC (Fibre Channel) status check in Proxmox VE: Installation and configuration.Hello. It will be nice to add FC (Fibre Channel) status check. to the GUI, for those servers that are using FC SAN storages. For that purpose i have created and tested the bash script. Tested with FC SAN (with 2 port FC HBA) and FC HP 3PAR A/A...
-
Wwoma replied to the thread Proxmox VE / PBS / Mamespace.Hi Fabian, bin nur PVE-Admin bei uns, PBS macht jemand anderes. Ich frage nach, dauert aber ein wenig.
-
Kkatamadone replied to the thread [SOLVED] Win2K8R2, pve9.1.7 and virtio drivers.virtio single is the the one you should use normally as far as i know
-
driley reacted to backgroundlogic's post in the thread Host freezing requiring physical reboot with Like.
Ended up going down a rabbit hole on that and found that while I had though I had updated the bios it was failing and clearing the screen before i could see the fail message. Bios has been updated, lenovo's usb bootable tool kept failing so I... -
Jjmjosebest replied to the thread Geo IP block help.It is neither feasible nor efficient to move the filtering to the network perimeter. Our infrastructure hosts thousands of virtual machines with specific firewall policies applied directly to the VM interfaces: multicast/broadcast control, port...
-
Kkatamadone replied to the thread VM freezes during snapshot/backup on NFS (Proxmox 9, no errors in logs).Hi, just join in this conversation. Having the same issue, if all guests are in. I have to test further. I'm also not sure if we had it this "impressive" from the start with 8.x. But just noticed a nearly 2minute hickup from our exchange -...