Latest activity
-
MMickyF reacted to gyptazy's post in the thread Seit Update auf Ver.9.1.7 haben die Nodes 3-mal höhere Grundlast?! with
Like.
Guten Abend zusammen, da ich ebenfalls auf diese Thematik aufmerksam gemacht wurde ein paar Anmerkungen. In den bisher beigefügten Übersichten ergibt sich an keiner Stelle der Aufschluss, dass diese Prozesse von PegaProx ein potentielles... -
MMickyF reacted to Mr.Blacksmith's post in the thread Seit Update auf Ver.9.1.7 haben die Nodes 3-mal höhere Grundlast?! with Like.
AAAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHHHHHH.... Gelöst! Kaum mal ein systemctl stop pegaprox-smbios-autoconfig && systemctl stop pegaprox-agent an den Konsolen abgesetzt, schon sinkt es wieder auf das Maß der...
-
RRaid007 posted the thread KVM processes in SWAP despite 35-55 GiB free RAM – Proxmox + ZFS in Proxmox VE: Installation and configuration.System: Proxmox VE (8.4.17, updated, no fresh install), ZFS 2.2.9-pve1, Linux 6.8.12-20-pve 256 GiB RAM, Single CPU (no NUMA) vm.swappiness = 1 - set from 60 to 5 and than to 1 ZFS ARC: default limit of 50% RAM = 125.7 GiB, currently used at...
-
-
HGibt es eine Möglichkeit den Media-Set Namen zu ändern. Da steht jetzt ein Datum. Ich will aber einen vernünftigen Namen haben.
-
-
Cces replied to the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk.Hi @fiona , I just noticed on the enterprise repo for PVE 8 that some updates related to VM firmware appeared yesterday. In the changelog details, I see mentions of several tools for reading VM firmware and similar tasks. Are these the Bookworm...
-
-
Vvtardiveau replied to the thread [SOLVED] VM Freeze - vCPU stuck in kvm_vcpu_block - Only Docker VMs affected.Hi, I have had a pretty similar problem for the past few weeks, but with a very different setup. In a VMware cluster, across many Fedora CoreOS VMs, only the one with Docker crashes very suddenly and randomly. Same symptoms: CPU at 100%, no...
-
dcsapak replied to the thread [TUTORIAL] Easy tutorial for eGPU thunderbolt passthrough on a Minisforum UM790 Pro.sadly we don't have the hardware here to test, but one thing that might help is the output of 'dmesg' after you plug in the enclosure (without running lspci) -
DMaybe your graphical issue is related to this thread: https://forum.proxmox.com/threads/graphical-errors-on-pve-webui-9-1-6.181154/#post-840458 There were issues with incorrect display of webgui elements when jumping from 9.1.5 to 9.1.6 before...
-
dakralex replied to the thread [Solved] Recent updates caused problem with migration.Hi! Could you post the output of pveversion -v, pct start 103 --debug and syslog which includes the starting of the container? Also what version of apparmor is running on the host? -
Kkd-infradijon replied to the thread Corosync - Cluster retransmit issues | pmxcfs / corosync synchronization problems | Proxmox cluster 3 nodes.Hello, I changed the NIC interface of the cluster for some tests with a fresh install. So this is not the same network. Regards, IDEZ Ugo
-
Kkd-infradijon replied to the thread Corosync - Cluster retransmit issues | pmxcfs / corosync synchronization problems | Proxmox cluster 3 nodes.Hello, I attach you the files. Regards, IDEZ Ugo
-
Kkd-infradijon replied to the thread Corosync - Cluster retransmit issues | pmxcfs / corosync synchronization problems | Proxmox cluster 3 nodes.Hello, I changed the NIC interface of the cluster for some tests. So this is not the same network. Regards, IDEZ Ugo
-
Ppsalkiewicz replied to the thread QLogic ISP4032 - no traffic in VMs..Hi, This might be hardware checksum offloading on the qla3xxx NIC breaking bridged VM/container traffic. The qla3xxx driver offloads TX checksum calculation to the NIC hardware. This works fine for the host's own traffic, but when packets from...
-
Dd.oishi reacted to arukashi's post in the thread [SOLVED] Proxmox freezes with high IO, maybe ZFS related with Like.
I've changed suspected failed drive sdb, for now its all okay, no more freezes since 36 hours ago. I hope the problem can be marked as solved. I came across this topic and in the end topic-starter changed the hardware too.
-
Bbios123 replied to the thread ACME Plugin - Hetzner "DNS Console is moving to the Hetzner Console".libproxmox-acme-plugins version 1.7.1 is out and supports hetzner cloud api. Just tested my updated DNS-01 challenge -> works!
-
Ppsalkiewicz replied to the thread Offline Node is drivin' me bananas.Hi, Did you check /etc/hosts on each host? Sometime there is a stale entry that causes lots of pain.
-
KKusselin replied to the thread Wenn alle Container und VMs runtergefahren sind - kein Internet mehr - Container schuld?.Ja danke Euch udn ist schon richtig...man muss sich halt mit allem befassen. Also als Haupt-DNS habe ich den Adguard LXC in der UDM stehen....dehalb ist es klr wenn der Container down ist das dann das I-Net weg ist (oohhmann klar) ich habe das...
-
Ppsalkiewicz replied to the thread NFS can be used for VM as well as backup..And one more thing - you asked whether it's good to separate it on different share. It doesn't make a difference if you create multiple shares on one server becuase the underlying block storage is responsible for performance not the share itself...
-
FFiruz replied to the thread No such device.What other solution would you suggest?
-
Ppsalkiewicz replied to the thread NFS can be used for VM as well as backup..NFS is a NAS (network attached storage) which is a file storage attached over the NFS network protocol. This means that there is a filesystem on a remote server that serves files over the network. This is perfect for such use cases like backups...
