Latest activity
-
JJohn Ratliff replied to the thread Podman in rootless mode on LXC container.This thread has been very helpful. I made a video playlist on my YT channel showing how I setup rootless podman under lxc under proxmox 9 with a debian 13 trixie LXC container...
-
Nnathanwoodburn replied to the thread Backblaze backup fails to upload all chunks.FYI here is the entire log https://upload.woodburn.au/inline/Ei1/task-pbs-backup-2026-03-31T15_39_41Z.log
-
GFrom my point of view it is not best practice to connect a PVE cluster directly to the outer internet. There should always exist a router with filtering capabilities. In that picture the router would do Geo blocking, beside other things. My...
-
Nnathanwoodburn posted the thread Backblaze backup fails to upload all chunks in Proxmox Backup: Installation and configuration.I've got my PVE server backing up to a backblaze S3 bucket. When it is backing up, it gets marked as having warnings and verifying the backup fails. If anyone has any suggestions that would be great. Thanks a ton 2026-04-01T03:25:45+11:00...
-
Ddregs5 posted the thread Offline Node is drivin' me bananas in Datacenter Manager: Installation and configuration.Howdy! I've got a 4 node proxmox setup - clustered. I've spent wayyy too much time troubleshooting this, but it's more an eye sore than anything. I've got a pihole, traefik, authentik setup along with my cluster- all nodes are fully reachable by...
-
-
Aanowak replied to the thread Ceph with 2 Cluster Networks.Thanks alexskysilk, I think I now understand.... I was stupid enough being new to Ceph asking AI for initial advice which led me down a rabbit hole of setting up a traditional storage with dual fault domains for storage back-end. Going through...
-
-
Aalexskysilk replied to the thread Ceph with 2 Cluster Networks.rather then quoting, I'll try to address all possible alternatives. ceph carries traffic on two seperate networks- public (host) and private (OSD-to-OSD.) Think of this as the host bus and disk bus on a RAID subsystem. While you can have both...
-
Aanowak replied to the thread Ceph with 2 Cluster Networks.Thanks spirit. So using 2 cluster networks is not really a valid design? I also saw this post https://forum.proxmox.com/threads/ceph-cluster-network-configuration.182268/#post-846381 So I am struggling to understand why that option would be in...
-
G_gabriel replied to the thread Geo IP block help.Edit : UdoB link is less complicated. I use this script https://github.com/mkorthof/ipset-country on a host customize the code to keep ipdeny.com download/update and ipset generation/update Remove firewall/rules parts Then use the "ipset"...
-
Aalexskysilk replied to the thread new drive setup, considering RAIDZ1.up to you how you manage your models. in my experience, new models are released every week and I dont bother keeping the old ones. Feel free to keep your hoarded models on the zpool. its not like its getting any use ;)
-
Zzenowl77 replied to the thread new drive setup, considering RAIDZ1.right now i have about 4.4TB+ of ai models between all the different text/image versions, loras and all the different things related to them all and for ollama since it cant just use the files as other options can. which is too much really, but...
-
Aalexskysilk replied to the thread new drive setup, considering RAIDZ1.keep those on the nvme. they dont need any resilience, and you're likely to be replacing them quite often anyway.
-
Zzenowl77 replied to the thread new drive setup, considering RAIDZ1.yeah i think id probably skip the special devices unless i end up getting some more NVMEs or something it has seemed to at least improve results slightly from what i have noticed although barely noticeable, i have also just been using it as a...
-
Aalexskysilk replied to the thread new drive setup, considering RAIDZ1.so yes :) l2arc almost never yields useful results. you're better off just using the drive seperately. More to the point- what is your usecase? in a homelab, its common that your bulk storage can be slow without any real impact. put your...
-
FFelix_C replied to the thread IBM Plugin.Hi Alex, You are correct, I forgot to mention that. The storage is a FlashSystem 7300, which is a block storage array.
-
RRedKage replied to the thread [TUTORIAL] Easy tutorial for eGPU thunderbolt passthrough on a Minisforum UM790 Pro.I have upgraded to Proxmox 9.1.7 with kernel 6.17.13-2 Then noticed the GPU wasn't working in my VM. Trying to investigate, I tried to query `lspci`, but this commands hangs/freezes, without printing any output. It just hangs forever. Cannot kill...
-
Aalexskysilk replied to the thread IBM Plugin.IBM Storage arrays can be one of many different solutions/topologies. It would be useful to mention what model/topology product you're referring to. Having said that- it most likely is a block device so yes, lvm would still be necessary if you're...
-
JJohannes S replied to the thread [PVE 9/ZFS-Based VM/LXC Storage] Why Shouldn't I Disable Swap Inside Linux VMs?.I didn't but will definitevly change this asap ;) One should take into account that for zswap you always need physical swap as backing device. For example if you use the defaults of PVEs installer for ZFS you will endup without space for a...
-
Aalexskysilk replied to the thread [SOLVED] Issue: Unable to reach Ceph after upgrade to Squid (19.2).Just mark the thread solved
-
FFelix_C replied to the thread IBM Plugin.Hi, Unfortunately, I don't have the documentation for that plugin yet; it was simply mentioned by the IBM team. I wanted to see if anyone has hands-on experience with this integration, and what the environment's performance has been like using...
