Latest activity
-
MMeachamusPrime replied to the thread Podman inside unprivileged Alpine container fails to start.Agreed! RTFM is seldom as helpful as just waiting for someone to actually contribute, and js2popular's solution has helped tremendously.
-
MMeachamusPrime reacted to js2popular's post in the thread Podman inside unprivileged Alpine container fails to start with
Like.
Create /etc/init.d/cgroups-reparent (inside the container) with these contents: #!/sbin/openrc-run depend() { need cgroups } start() { # https://github.com/moby/moby/blob/38805f20f9bcc5e87869d6c79d432b166e1c88b4/hack/dind#L30-L34 #... -
MMeachamusPrime reacted to spiralsugarcane's post in the thread Podman inside unprivileged Alpine container fails to start with Like.
Awesome! This is the solution I (and probably the thread author) was looking for! Thank you very much for ignoring the drama and RTFM comments and providing a straight out solution.
-
MMarkku replied to the thread Corosync - Cluster retransmit issues | pmxcfs / corosync synchronization problems | Proxmox cluster 3 nodes.Also, there are two mentions about 10.100.37.0/27 network but no IP addresses shown that match the subnet. Typos when manually changing the outputs for some reason?
-
LLeonid Kanareykin replied to the thread Cluster setup and HA configuration suggestions.Can I use VLANs dedicated for Ceph only trafic with my 25 Gb NICs? Or i must use separate switches?
-
MMr.Blacksmith replied to the thread Seit Update auf Ver.9.1.7 haben die Nodes 3-mal höhere Grundlast?!.Ausgabe perf top --sort pid,comm,dso sieht nun gescheiter aus, Last am Host bleibt aber bei um die 20%:
-
-
spirit replied to the thread Setting up a cluster and made a mistake.it's a simple debian package, so if you are running debian on your machine yes. (you could install it on pbs too as alternative). they are also this alternative opensource project : https://pegaprox.com/ , it's python based web management... -
PProf. Dr. YoMan replied to the thread File Restore Auswahl "Fehler".Und du bekommst genau die gleiche Fehlermeldung in der UI, wenn du dann das Backup anschaust? Kannst du das Backup genau wie ich auch funktionierend zurückspielen?
-
JJohnnyMegs posted the thread [SOLVED] Issue: Unable to reach Ceph after upgrade to Squid (19.2) in Proxmox VE: Installation and configuration.Good day. I have recently updated my Ceph from Reef (18.2.8) to Squid (19.2) in preparation for upgrading my ProxMox systems from v8 to v9. I followed the below documentation, to prepare...
-
Aaeisan replied to the thread Migrating Servers/Fresh Installs - Sanity Check.What type of environment are you in? Business/enterprise or homelab? Being a subscriber I presume the former, but I don't know. If that is the case, I'm sure our use cases for S3 storage would be pretty different. I looked at Wasabi and it's...
-
MMr.Blacksmith replied to the thread Seit Update auf Ver.9.1.7 haben die Nodes 3-mal höhere Grundlast?!.
-
-
PProf. Dr. YoMan replied to the thread File Restore Auswahl "Fehler".Ja, es ist HAOS. Ich verstehe deine Antwort nicht. Hast du das gleiche "Problem"?
-
MMr.Blacksmith replied to the thread Seit Update auf Ver.9.1.7 haben die Nodes 3-mal höhere Grundlast?!.Perf ist drauf, Danke hierfür. Mit perf top steht ganz oben mit über 30% Auslastung qm perl....direkt gefolgt von pct perl mit 10-20%...Perl-Version auf allen Knoten 5.40.1...PVE ist wie gesagt Up2Date...mehr und aktuelleres Perl gibt...
-
Pproxuser77 replied to the thread Subscribing to proxmox as an individual in then uk..Btw, I just checked, the cost for one machine was €79.90 back in 2019. Now, with VAT, it would be almost double that. And because I have a total of three machines now, it would definitely be too expensive. However, if it were possible to...
-
spirit replied to the thread [SOLVED] Veeam v12 Native Proxmox Integration - Delivering 4.9 Gbps Backup Speeds to Offsite Storage.proxmox don't have yet native continuous storage replication between 2 separated cluster.
-
Mmason64 replied to the thread Setting up a cluster and made a mistake.great does proxmox datacenter manager work on its own physical machine?
-
spirit replied to the thread Setting up a cluster and made a mistake.you need 3 nodes for a cluster. with 2 nodes, if 1 node goes down, the other node will be readonly. (or install corosync qdevice on pbs for the third corosync vote). you can use proxmox datacenter manager if you want to manage in a central way...
-
Pproxuser77 replied to the thread Subscribing to proxmox as an individual in then uk..Yes, it does. In fact, that's exactly what I used from 2017 to 2019 when it was still under maurer-it.com. However, just like with OP, suddenly they asked for a VAT number. Obviously, I don't have one as a home user. After telling them this, they...
-
Mmicneu reacted to TErxleben's post in the thread Internetzugriff auf Proxmox VMs / Docker Container hinter OPNsense mit Reverse Proxy with Like.
Geschichten, die das Leben mit LXCs schreibt und es hierhin passt. Ich setze seit gefühlten Äonen Apache Guacamole als Fernsteuerungsproxy ein. irgendwann kam ich auf die naheliegende/dusselige Idee, selbiges zu virtualisieren Da ich damals noch...
-
Ppsalkiewicz replied to the thread UPS Eaton Ellipse Pro (no ethernet) / Proxmox Cluster / Three nodes ?.Yes, I know - it's the most expensive usb-thingie in the world :-)
