Latest activity
-
JJerome69 replied to the thread [0x08000800]: an uncorrected error caused a data fabric sync flood event.Before replacing the CPU thermal paste, temperature was 60°C in the BIOS, 38°C after changing. So maybe the temperature is rising more than you think :)
-
cheiss replied to the thread Set VNC password with hook script not working.Oh right, yeah, didn't read that! Although then it would be possible to use pvesh create /nodes/<hostname>/qemu/<vmid>/monitor -command='set_password vnc none -d vnc2' as command instead, that would do the trick. -
Ggfngfn256 replied to the thread Set VNC password with hook script not working.So the command has to be entered WITHIN the VM? The suggested hook-scripted commands are not doing that. Your going to need a Guest agent command or SSH etc. to get that command to run within the VM.
-
cheiss replied to the thread Set VNC password with hook script not working.Hi, Perl isn't shell scripting - to run external commands, you need to execute them explicitly. For example, this Stack Overflow posts shows a few different ways: https://stackoverflow.com/a/3200810 So I'd recommend doing the following, if you...
-
Ggrimey replied to the thread Major speed reduction with bridged NIC vs Vmware.So i did some further testing and bypassed the pfsense vm by shutting down the pfsense VM and directly connecting my ISP router/Modem to the bridge interface. I then tested on a VM using this interface and can see it is getting close to the speed...
-
-
JJohannes S replied to the thread Proxmox Env Inventory.This isn't actually improving your case ;) I'm not a developer myself but mainly a sysadmin. Thus I wouldn't trust code written by me in a production environment (except small scripts, nagios plugins etc). Software Engineering after all isn't my...
-
Zzzjin replied to the thread [0x08000800]: an uncorrected error caused a data fabric sync flood event.In my case, Windows crashes just a few minutes after startup, before the temperature even rises.
-
shanreich replied to the thread nftables does not work on virtual machines.Did you define the rules on host layer only? Or on VM as well? Can you post the output of the following commands? nft list ruleset systemctl status proxmox-firewall cat /etc/pve/firewall/cluster.fw cat /etc/pve/local/host.fw and the firewall... -
Ee-Quest reacted to MarkTheSpark's post in the thread [SOLVED] Installing PVE on an iSCSI boot LUN with multipathing with
Like.
Hello e-Quest, Due to the lack of iSCSI boot support in Proxmox, although the above method worked without issue for us, we have installed a couple of M2 SATA drives in each blade and configure as RAID1, then install Proxmox onto these. We... -
JJohannes S replied to the thread Proxmox Env Inventory.Thanks for the hint, of course it was Androids Auto-Typo-Feature ;) I edited my post, I meant: "Your point don't address the root concern though. It's quite difficult to proove that a certain Software doesn't have a specific feature ( aka...
-
JJohannes S reacted to t.lamprecht's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
yes, we indeed uploaded a proxmox-kernel-7.0.0-2-pve-signed package to circumvent this versioning "issue", over adapting the simpler ordering algorithms of the proxmox-boot-tool. As while the versions were correctly ordered from the POV of apt...
-
JJohannes S replied to the thread [SOLVED] Veeam Backup nicht möglich "Hot Add".Für application-ware Backups würde ich (wenn ich Veeam verwenden würde, was ich nicht tue) direkt den Veeam-Agent innerhalb der VM installieren, damit funktioniert es nach den Berichten hier im Forum problemlos.
-
Bbluesite replied to the thread Hook Script to disable pbs storage.when start your backup? you can write a script to start your vm and then enable your pbs in a cron job before your backup job is starting and to disable the pbs after the backup is finished when the vm is not more running maybe with another script
-
MMarkTheSpark replied to the thread [SOLVED] Installing PVE on an iSCSI boot LUN with multipathing.Hello e-Quest, Due to the lack of iSCSI boot support in Proxmox, although the above method worked without issue for us, we have installed a couple of M2 SATA drives in each blade and configure as RAID1, then install Proxmox onto these. We...
-
ProxmoxSecurityAdvisory replied to the thread Proxmox Virtual Environment - Security Advisories.Subject: PSA-2026-00012-1: Corosync: DoS via malformed packets in unencrypted clusters Advisory date: 2026-04-15 Packages: corosync Details: Two flaws were found in Corosync, the clustering stack backing Proxmox VE's clustering feature. An... -
RRichieX replied to the thread [SOLVED] Veeam Backup nicht möglich "Hot Add".Der Fehler tritt tatsächlich nur in Verbindung mit Application Aware auf. Laut Veeam Support wird anstelle von .\administrator oder domain\administrator user@domain.local verwendet. Uns wurde von Veeam ein Hotfix bereitgestellt. Leider nicht für...
-
Sspintike posted the thread [SOLVED] Cluster based vnc / console error - Version 2 in Proxmox VE: Installation and configuration.Hello community! First of all I have to thank fmgoodman again for writing such a detailed explanation of his error, described in his post. I come to find that I have a very, very similar problem as his cluster. Having five hosts in a cluster...
-
Ee-Quest reacted to MarkTheSpark's post in the thread [SOLVED] Installing PVE on an iSCSI boot LUN with multipathing with Like.
Hello All, I've spent far too much time getting PVE installed in our Cisco UCS blade environment. So in the hope that it helps others, I will share my installation instructions. Thanks to those who provided little nuggets of information to help...
-
Ee-Quest replied to the thread [SOLVED] Installing PVE on an iSCSI boot LUN with multipathing.How stable is this configuration one year later? Any challenges with Proxmox maintenance and updates? We are running the same environment and facing the same problem with the lack of native supported iSCSI-boot.
-
KKlug replied to the thread [SOLVED] Sync to two PBS, different space used.It ended up during the night Prune/GC happened too and space used went from 25 to 13 TB (dedup: 4.43).
