Latest activity
-
Ggfngfn256 replied to the thread Periodic power consumption spikes on Proxmox VE 9.1.6 (Dell OptiPlex 7050) – normal behavior?.Show output of top during a power surge (in code block, as Impact pointed out). In the graphs you posted of PVE host nothing stands out (Maybe higher than normal Server Load than to be expected from such an inactive system). Maybe look at NW...
-
shanreich replied to the thread EVPN, IPv6 and routed underlay.Is forwarding enabled for IPv6? head -n1 /proc/sys/net/ipv6/conf/*/forwarding -
KKlug replied to the thread [SOLVED] Sync to two PBS, different space used.Pruning... Good catch: I did not set the "transfert last", just changed it. Sync stopped and restarted (it was in queue).
-
Ggfngfn256 reacted to Impact's post in the thread Periodic power consumption spikes on Proxmox VE 9.1.6 (Dell OptiPlex 7050) – normal behavior? with
Like.
No. Please use code blocks to preserve the formatting. This is unreadable. -
Jjaminmc replied to the thread Severe I/O performance degradation on Windows VMs (Server 2022) on Proxmox 8/9.Yes, you’re right! virtio-win-0.1.285 has a significant issue. You can find it here: https://github.com/virtio-win/kvm-guest-drivers-windows/issues/1453. The issue was resolved in...
-
Tt.a.s reacted to Onslow's post in the thread [SOLVED] Ingress-connection issues with some remote mailservers with Like.
If you mean those "match_..." lines, I'm not convinced they are about non matching communication. From what I understand (unless I'm wrong), I think those are about not matching any particular special cases or exceptions. Which is rather OK. In...
-
Stoiko Ivanov reacted to t.a.s's post in the thread [SOLVED] Ingress-connection issues with some remote mailservers with Like.
Hi @Stoiko Ivanov, thank you for your reply. You nailed it. Of course I was too dense to enable TLS and now that it's on, the mails go through in both directions... I'm facepalming real hard right now. I have a handful of other servers in my logs... -
Tt.a.s reacted to Onslow's post in the thread [SOLVED] Ingress-connection issues with some remote mailservers with Like.
Hi, @t.a.s https://www.postfix.org/DEBUG_README.html#debug_peer Verbose logging for specific SMTP connections In /etc/postfix/main.cf, list the remote site name or address in the debug_peer_list parameter. For example, in order to make the...
-
Tt.a.s reacted to Stoiko Ivanov's post in the thread [SOLVED] Ingress-connection issues with some remote mailservers with Like.
did you restore a backup from your old gateway - or set it up freshly? one guess based on the debug-output: - your PMG does not seem to have TLS enabled - maybe the sending servers are configured to not send mails over the internet without TLS...
-
Tt.a.s replied to the thread [SOLVED] Ingress-connection issues with some remote mailservers.Hi @Stoiko Ivanov, thank you for your reply. You nailed it. Of course I was too dense to enable TLS and now that it's on, the mails go through in both directions... I'm facepalming real hard right now. I have a handful of other servers in my logs...
-
SteveITS replied to the thread SPF fail, but SPF is legit?.There's a record tester at https://www.kitterman.com/spf/validate.html. There are rules, notably the 10-DNS-lookup limit, that catch people over time especially if using includes. -
SteveITS replied to the thread [SOLVED] Sync to two PBS, different space used.Pruning or syncing? There is a "transfer last ___" in the Advanced settings of a sync job, to send only the last "n" backups of each VM/CT. Otherwise the sync will transfer all backups and then the GC and then pruning will take effect.
-
Jjaminmc reacted to UdoB's post in the thread What are these default root crontabs and what do they do? with Like.
Note that there may be additional systemd-timers, which are not visible in the classic crontab context. Run systemctl list-timers -a instead. You also did not mention user-specific crontabs, editable by everybody by crontab -e - including one...
-
KKlug posted the thread [SOLVED] Sync to two PBS, different space used in Proxmox Backup: Installation and configuration.Hello all. We have a PVE cluster with about 35 TB used (Ceph), going well. This is backed up to a datastore on a PBS (12 HD in ZRAID2 + special devices) that says it uses 35.64 TB (65 groups, 3906 snapshots, dedup is 34.69). Smoothly too. This...
-
AandyB2018 replied to the thread Periodic power consumption spikes on Proxmox VE 9.1.6 (Dell OptiPlex 7050) – normal behavior?.The peaks you see in the graphs at 1 AM and 5 AM are VM backup and then backup inside HA to Google Drive. As far as I remember I did move HA to another PVE and shutdown it on the actual host. The consumption was the same (minus a few 0.5W for HA...
-
-
FHi, The last friday in the early morning a node reboot alone, but i don't know what trigger that, I chek the logs and see the next lines: Memory failure: 0xca06f60: Sending SIGBUS to CPU 1/KVM:4190709 due to hardware memory corruption...
-
Jjaminmc replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.Although this is the official Linux Kernel 7.0.0 release, it is still classified as beta since Ubuntu 26.04 has not yet been released. Proxmox leverages the Ubuntu kernel, enhanced with custom compile flags, built-in ZFS support, and patches...
-
JJohannes S reacted to monkfish's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
Here you go - in case you've not already found it this is courtesy of @uzumo in this thread...
-
JJohannes S reacted to fiona's post in the thread Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
From the analysis until now, the IO pressure seems to be a cosmetic issue or rather accounting issue in the kernel. QEMU switched to using io_uring for event loops with QEMU 10.2. The issue appears in combination with IO threads, where a blocking...
-
JJohannes S reacted to beisser's post in the thread Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
its like using debian sid and then complaining about issues with it. according to his logic debian sid should be qc-tested since the repository is available to thousands. thats not how it works. test = bleeding edge stuff with a decent chance...
