Latest activity
-
SStephane Chazelas posted the thread Older LTS nvidia vGPU host drivers with newer kernel / pve-manager in Proxmox VE: Installation and configuration.Hello, from https://pve.proxmox.com/wiki/NVIDIA_vGPU_on_Proxmox_VE#Software_Versions I see now that version 595.58.02 from branch 20.0 is available and supported with pve-managerKernelvGPU Software BranchNVIDIA Host drivers...
-
Gghandalf reacted to psalkiewicz's post in the thread [PROJECT] Proxmox PVE & Atlassian Confluence integration with
Like.
Hello Community, I'd like to share one of my projects with you. It's a python tool that connects to Proxmox PVE API and gets a list of virtual machines. It creates a table with virtual machine details and converts it into page template for... -
Ggayanll replied to the thread DVB adapter / USB passthrough.Did you found a solution for this issue? I successfully passed through, Drivers is detected by TVH but its not scanning any channels as it should
-
UdoB replied to the thread What are these default root crontabs and what do they do?.Note that there may be additional systemd-timers, which are not visible in the classic crontab context. Run systemctl list-timers -a instead. You also did not mention user-specific crontabs, editable by everybody by crontab -e - including one... -
EErnst T. replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.I can confirm that. The kernel works great, but it needs to be pinned. proxmox-boot-tool kernel pin 7.0.0-1-pve
-
EErnst T. reacted to Uturn's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
I've just updated to the final 7.0.0-1-pve and everything's running fine, except that after installation i had to pin this kernel, as the system would always choose the "old" 7.0.0-1-rc7-pve" one (tried on different machines without luck) So i...
-
UdoB reacted to Mike_Scholes's post in the thread Migrating Servers/Fresh Installs - Sanity Check with Like.
Suppose it would work but if you lose the primary server you then lose your backup server if it's a vm. Just more hassle recovering as you would have to install a backup server somewhere in order for you to access your backups. Personally my home...
-
Looks like the boot partitions are under proxmox-boot-tool's control. You'll need to remove the old ESP and add the new one on the new drive, using proxmox-boot-tool format and proxmox-boot-tool init as the manual prescribes...
-
Aalex01763 replied to the thread What are these default root crontabs and what do they do?.I guess I'm back to square one... I'm suspecting it's my cheap esata ata controller but I'll have to open a new post if I can find anything later. Thank you for the advice!
-
UdoB replied to the thread [SOLVED] Zfs boot disk replacing.Well..., I hesitate to answer - because none of my machines has "booted with legacy bios", all of them report "booted with uefi".
-
Aalex01763 reacted to Markku's post in the thread What are these default root crontabs and what do they do? with Like.
root@pve1:~# pveversion pve-manager/9.1.7/16b139a017452f16 (running kernel: 6.17.13-2-pve) root@pve1:~# cat /etc/crontab # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the...
-
Aalex01763 replied to the thread What are these default root crontabs and what do they do?.Hey thanks for sharing this! I just saw this and noticed this was way different than what I was looking at, and it turns out I was confused between two ssh terminals. The one I was asking was actually one of my other vms, so you saved me from...
-
UUturn replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.I've just updated to the final 7.0.0-1-pve and everything's running fine, except that after installation i had to pin this kernel, as the system would always choose the "old" 7.0.0-1-rc7-pve" one (tried on different machines without luck) So i...
-
RRC_cat reacted to Tomahawk's post in the thread 845 Failed to run lxc.hook.pre-start for container with Like.
I found the root cause namely I restored the LXC on different machine on which the attached disk has not been mounted mp0: /mnt/pve/smb/share,mp=/mnt/share that cause the issue. When femoved it then it works fine.
-
TTheDave replied to the thread Support for Windows failover clustering.Hi, I now also tried endlessly to get a Windows Failover Cluster with 2 Windows VM (running on 2 seperate Proxmox nodes in a Proxmox Cluster) to run but no luck so far. The Proxmox nodes are connected via Fiber Channel to a SAN. But even if I...
-
MMarkku replied to the thread What are these default root crontabs and what do they do?.root@pve1:~# pveversion pve-manager/9.1.7/16b139a017452f16 (running kernel: 6.17.13-2-pve) root@pve1:~# cat /etc/crontab # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the...
-
FFPOlivier replied to the thread [SOLVED] Zfs boot disk replacing.proxmox-boot-tool status Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace.. System currently booted with legacy bios 6901-556E is configured with: grub (versions: 6.14.11-5-pve, 6.17.13-1-pve, 6.17.2-2-pve) 6902-1625 is...
-
LLeonid Kanareykin reacted to jdancer's post in the thread Best Practices for Setting Up Ceph in a Proxmox Environment with Like.
I manage several production 5- and 7- node Proxmox Ceph clusters. Why 5 or 7 nodes? Well, with 3 nodes, you can only tolerate a single node failure and I believe because of lack of quorum, no writing of data will occur. Strongly suggest 5-nodes...
-
Aac8a2126-3fc7-4acd-90ee-3 posted the thread Sender verification failed when zone has DNSSEC issues in Mail Gateway: HA Cluster.Hello, I have been a Proxmox Mail Gateway user for many years, but only became a forum member today. Unfortunately, only today (far too late, admittedly) I noticed that there were DNSSEC issues with one of my DNS zones. The zone itself hasn’t...
-
Aarukashi reacted to d.oishi's post in the thread [SOLVED] Proxmox freezes with high IO, maybe ZFS related with Like.
not changed any settings. The issue still occurred even after replacing the SSD (`sdd`). The same issue has also occurred on the other disks (`sda` / `sdb` / `sdc`). Based on the above, I suspect the problem may be related to a component...