Latest activity
-
Kkd-infradijon replied to the thread Cluster retransmit issues.I post on the forum too about this problem :) : - https://forum.proxmox.com/threads/corosync-cluster-retransmit-issues-pmxcfs-corosync-synchronization-problems-proxmox-cluster-3-nodes.182559/
-
Ppsalkiewicz replied to the thread SMB Performance Woes.Hi, The issue with pinging is normal - I mean 169. are link local addresses and the stack doesn't know which interface to use unless you specify it explicitely. Given that the Ubuntu VM with SR-IOV also gets bad IOPS, but Windows clients are...
-
Bbeisser replied to the thread Hardware aus Zeiten von DDR3.Disclaimer: Mein Setup ist ein Homelab! Als Alternative gibts auch noch truenas + pbs als LXC-Container auf truenas. So betreibe ich das. Damit gibts kein Filesystem auf Filesystem, wie bei einer VM, sondern PBS bekommt direkt zugriff auf einen...
-
AAetherPlasma replied to the thread Proxmox VE - Support Lifecycle.Hey, I have a question about the EoL of PVE 8. Is it truly the same as the Debian End of Regular Support or are there a few additional Months to it? Because the end of the Regular Support of Debian 12 is 2026-06-10 and not 2026-08. See...
-
KKusselin replied to the thread Wenn alle Container und VMs runtergefahren sind - kein Internet mehr - Container schuld?.ja klar....immer so....Kenntnisse sind das A und O. -> learning by doing... Ich habe ja aber in der UDM noch den DNS1 und der sollte doch funktionieren.....also DNS1 = zb 192.168.178.1 udn DNS2 = 192.168.178.49 vom Adguard Wieso geht dann das...
-
KKusselin replied to the thread Wenn alle Container und VMs runtergefahren sind - kein Internet mehr - Container schuld?.O.K. wieder was gelernt.... Also einfach im Webinterface auf PVE klicken dann KOnsolenfenster öffnen und das von dir reinkopieren und Enter drücken...vorher alles runterfahren... nslookup google.com nslookup google.com 1.1.1.1 ping gogle.com ping...
-
Mmason64 replied to the thread Error when backing up 1 out of 4 vms only.timesout.Hi @Chris Thanks for the quick reply, Can i just check where do i look for the backup task log? and look for IO delays do i check that on the PBS or PVE server? Thanks
-
shanreich replied to the thread Struggling with Linux Bridge/VLAN.If you have a VLAN-aware bridge then it is sufficient to just leave it as is and use the respective VLAN tag at the network device of the VM / Container. If you want the host to have an IP in that VLAN as well, then you configure it the same way... -
MManu99 reacted to vanstek_'s post in the thread Try to install Proxmox 9.1 on a old linux server, and get lots of disk IO error. with
Like.
Hey all, Was pulling my hair out over this for the past 12 hours. Thought it was bad sata/power cables, swapped those out to no avail, so I thought it was a bad SSD, even though SMART score was fine. Went to Best Buy and got a new SSD. Much to my... -
Pproxuser77 replied to the thread How to install and use qm from remote host?.qm is a local command-line tool. It is installed on the Proxmox host itself and not exposed as a network service. To use it, you need to log in to the Proxmox host, usually via SSH, and run the command there, just as you would with any other...
-
Kkd-infradijon posted the thread [SOLVED] Corosync - Cluster retransmit issues | pmxcfs / corosync synchronization problems | Proxmox cluster 3 nodes in Proxmox VE: Installation and configuration.Hello, I am opening a forum discussion because I am experiencing an issue with the Proxmox cluster in my environment. Indeed, I installed Proxmox VE 9.1.6 on each node and everything went very smoothly, right up until the cluster was created...
-
OOnslow replied to the thread [SOLVED] Ingress-connection issues with some remote mailservers.Hi, @t.a.s https://www.postfix.org/DEBUG_README.html#debug_peer Verbose logging for specific SMTP connections In /etc/postfix/main.cf, list the remote site name or address in the debug_peer_list parameter. For example, in order to make the...
-
BBderoff replied to the thread [SOLVED]Missing chunk, dosent resync ?.Exactly I feel stupid for not having seen this, thank you very much !
-
Ssyned posted the thread Quadstor VTL (extended with deduplication) with Proxmox Backup Server - Experiences? in Proxmox Backup: Installation and configuration.Hello Proxmox Community, I'm currently running a virtual tape library (Quadstor VTL, extended with deduplication) in my homelab, primarily for personal use with Bacula. I'm now looking into expanding my backup solution, or potentially...
-
DDerekG reacted to effin_dead_again's post in the thread (Unofficial) Proxmox VE VDI Client - New Release 3.0.0! with Like.
All, I'm excited to announce a new release of the unofficial VDI client for Proxmox VE (v3.0.0)! New features: New look and feel! (Replaced PySimpleGUI with customtkinter) Added pagination for large sets of VMs (page size customizable in...
-
Kkd-infradijon replied to the thread Cluster retransmit issues.Hello Sinevil, We have a similar problem than you. Our previous installations worked fine, using the same equipment and the same connection, but know, we have the same errors than you. We've tried a variety of troubleshooting steps in every...
-
PPaul554 posted the thread How to install and use qm from remote host? in Proxmox VE: Installation and configuration.I'm new to proxmox (and like it :-)), but now want to version my cluster setup (bunch of VM's /w specific confs). To this purpose i'm searching for a cli tool to manage my VM's (which appears to be qm). Now I get stuck on following: 1) How do i...
-
Bboisbleu replied to the thread [SOLVED] Lexware Premium unter Win11 läuft sehr langsam, keinen offensichtlichen Grund, neue Hardware.Läuft das Lexware jetzt flüssig?
-
BBderoff posted the thread [SOLVED]Missing chunk, dosent resync ? in Proxmox Backup: Installation and configuration.Hi, I have 2 PBS each on separate site, lets say A and B. All datastores are synced between them but i have missing chunk on a fresh synced datastore on B pulled from A, on a specific snapshot. It seem B dosent try to pull missing chunk if i...
-
OOK, yes that does kinda fit and sound about right to me.. so I should wipe the Scratch drive and let ProxMox do everything instead of me manually doing it.. OK, lets give that a try... Or should I now try to just mount it? EDIT : So I just...