Ehrlich gesagt würd ich bei dem i5-8400 Setup bleiben. Für nen PBS der 2-3x die Woche ein paar Stunden läuft ist das mehr als genug, und du hast damit neuere Hardware mit weniger Stromverbrauch. Die 175 EUR für DDR3-Gebrauchtteile mit unbekannter...
Hallo,
worüber sollte die Storage Box in PBS eingebunden werden? CIFS oder SSHFS? Hast du irgendwo eine Anleitung? und hier wird gesagt, dass inkrementelle nicht funktionieren: https://www.youtube.com/watch?v=27mRYO3_GLI&t=4m33s
Wie sieht das...
Den Host musst du dafür nicht runterfahren. Installier dir ssacli aus dem HPE MCP Repo und dann direkt im laufenden Betrieb:
ssacli ctrl all show config detail
Zeigt dir SSD-Firmware, Cache-Status, Errors usw. ohne Downtime. Btw, die "Recovered...
@Browbeat Dass systeminfo nen Hypervisor erkennt ist unter KVM normal, das wird immer angezeigt solang die VM unter nem Hypervisor läuft. Das ist aber nicht das Problem. Wichtig ist, dass Windows nicht seinen eigenen Hypervisor (Hyper-V/VBS)...
Hi,
das sollte grundsätzlich ganz gut mit einem Removable Datastore funktionieren.
Also ein lokaler sync job auf den removable datastore, am anderen Standord dann in die andere Richtung.
Danach müssen in Zukunft dann nur mehr die geänderten...
Schau dir mal die Hetzner Storage Boxen an. https://www.hetzner.com/de/storage/storage-box/, Standort DE/FI. Kannst du per SSH als PBS Datastore anbinden, inkrementelle Backups gehen damit problemlos. Ist quasi der Klassiker für PBS Offsite.
Die 5% freier Speicher sind wahrscheinlich das Problem. Wenn beim letzten Kernel-Update zu wenig Platz war, wird das initramfs nicht richtig gebaut und dann kommt dieser Fehler.
Bevor du den Kernel neu installierst wie @bl1mp vorschlägt, check...
Meine damit eher den Gewinn verglichen mit einem zweiten Medium. Ein ZFS send liesse sich für ähnliche Hardware Kosten einrichten, würde aber massiv mehr bringen.
Gut, aber VPN ist nun mal nicht "keine Verbindung". In der Praxis ist es...
Also eigentlich ging es mir ja nur darum zu sagen, dass ZFS Repplikation eine valide Art ist um Backups zu machen und, dass wenn man ZFS Pull Repplikationen macht, man im Prinzip das zusätzliche 1 für offline oder unveränderbar, quasi gratis mit...
Hi,
you can just use apt to install the .deb package. Navigate to the directory where the .deb file is located and run the following command:
sudo apt install ./<your-file>
There are several calculators online such as https://florian.ca/ceph-calculator/.
With 3 nodes and 1 off there is nowhere to replicate so yes you’d have 2 copies. If another OSD is then lost those PG would have only 1 copy and I/O would stop...
Each of the 3 Nodes has a full copy of all data.
So your real usable space is somewhere below 27TB - you already mentioned the %-values. Probably a good idea to play it safe and stay under 70% in case a sudden spike happens, like unplanned data...
This is only true for owned mount point volumes of containers, because containers are backed-up and restored as a whole file-system at the moment. For a VM, only disks that are part of the backup will be removed during restore (based on the drive...
Hey all...So I am testing a failover WAN with VPN connectivity to my remote site. Everything works "except" some connectivity to PBS for sync jobs and monitoring API calls. Oddly I see the same on PVE but there is more information on teh PBS...
Ehrlich gesagt würd ich bei dem i5-8400 Setup bleiben. Für nen PBS der 2-3x die Woche ein paar Stunden läuft ist das mehr als genug, und du hast damit neuere Hardware mit weniger Stromverbrauch. Die 175 EUR für DDR3-Gebrauchtteile mit unbekannter...
I can provide an update to this and I think the answer is just the behavior at this point.
I've tested concurrent migrations (4-5) and get about the same throughput per import as if I was just running one, so it appears that there is logic to...
Thanks. I updated the hosts files, and it works now. So, the web UI simply uses hostnames to reach other cluster nodes. /etc/pve/.members seems to have been automatically updated with the same addresses.