Latest activity
-
JWhat are you defining as "using" for the 2.82 GB? PVE will show the total used by the VM. If you've assigned 84 GB the VM could use that for caching, ARC, lots of things. It could use it then stop using it.
-
JDo you use PCIe-passthrough? And like others already mentioned, check ZFS ARC usage with: zarcsummary -s arc
-
SteveITS replied to the thread Understanding Capacity Limits with Ceph.There are several calculators online such as https://florian.ca/ceph-calculator/. With 3 nodes and 1 off there is nowhere to replicate so yes you’d have 2 copies. If another OSD is then lost those PG would have only 1 copy and I/O would stop... -
JJohannes S replied to the thread First Proxmox homelab build - sanity check on hardware, service layout, and storage.Please note that the need of ECC-RAM for ZFS is quite overblown: https://jrs-s.net/2015/02/03/will-zfs-and-non-ecc-ram-kill-your-data/ This blog post is quite long (but still good and highly recommended!) reading, the most important point imho...
-
Ffreundschaeft posted the thread Understanding Capacity Limits with Ceph in Proxmox VE: Installation and configuration.Hi everyone, we are using Proxmox VE with Ceph and were wondering how much storage we should use from our available storage before ceph starts acting up. Our Ceph Cluster consists of three nodes that each contribute a capacity of 27,94TB, so we...
-
JJohannes S replied to the thread No web GUI after upgrade from 9.0.11 to 9.1.6.Thanks, this confirms that indeed at the moment you don't have a widget file altered by a script, so everything should be ok. Now I know you already said this, but in the past we had some users here, who somehow forgot that they had something...
-
Jjaminmc replied to the thread Ram report issue to multiple Hosts.Hey, This is actually pretty normal on Proxmox 9 (especially 9.1.7) and catches a lot of people off guard. The high host RAM usage (~94GB out of 125) is what QEMU/KVM has reserved/allocated on the host side for your VMs — basically close to the...
-
MiamiJack replied to the thread [SOLVED] Can I use PMG to filter an entire shared-hosting (Plesk) server?.Did you get it working? -
JJohannes S replied to the thread [SOLVED] Lexware Premium unter Win11 läuft sehr langsam, keinen offensichtlichen Grund, neue Hardware.Wie ausführlich mit wieviel Halbwissen darf es sein? ;) Ich versuche mal an einen auf Halbwissen (also bitte mit Google/Doku gegenprüfen, hoffentlich korrigiert mich hier jemand, wenn ich einen zu großen Bock schieße...). Grundsätzlich ist es ja...
-
MiamiJack posted the thread Tracking Center - Speed and Functionality ... or lack of functionality. in Mail Gateway: Installation and configuration.Hello All, I beleive this topic has been brought up before, I'm sure I have at least once. The tracking center is useless... I say that because here I am 8 days into the month and there are 7 Million lines in the mail log and basically it times...
-
AAaronD12 replied to the thread Proxmox installation failed on "bootloader setup errors: unable to install initramfs".Just had this issue -- clean install. Downloaded the 9.1.1 ISO and wrote it to a USB drive. Whether booting using UEFI or BIOS, I get this message. Just downloaded 9.0.1 ISO and wrote it to the same USB drive. It installed and made the drive...
-
Bbl1mp replied to the thread First Proxmox homelab build - sanity check on hardware, service layout, and storage.Your welcome :) hope it was helpful.
-
SteveITS replied to the thread Ram report issue to multiple Hosts.What are you defining as "using" for the 2.82 GB? PVE will show the total used by the VM. If you've assigned 84 GB the VM could use that for caching, ARC, lots of things. It could use it then stop using it.
-
Bbl1mp replied to the thread Ram report issue to multiple Hosts.Hi scopic88, welcome to the forum. :) RAM utilization depends a little bit in the guest configuration. Can you elaborate, what RAM configurations are in use for the guests? (VM or LXC - KSM enabled or not - Ballooning devices in use? and the...
-
SteveITS replied to the thread Configuring Postfix Relay to Office365 on Proxmox.I hate to rain on your parade but per...
-
Iipguru99 replied to the thread SDN cant delete vnet.Thank you shanreich I had only set up my first vnet and subnet and decided I wanted to change things. Not only did I have no idea how integrated IPAM "stuff" is in there, you can do stuff like dhcp reservations in there.
-
Hheubi replied to the thread Configuring Postfix Relay to Office365 on Proxmox.Hi, I am trying to set up Proxmox Mail Gateway with Sasl-XoAuth2. Could get the token out of M365 but somehow can't get it to run to the end. Do you have also a "how to do" for PMG to M365. Regards Heubi
-
Jjaminmc replied to the thread No web GUI after upgrade from 9.0.11 to 9.1.6.Doesn't seem to work.... root@Froto:~# debsums -c -bash: debsums: command not found root@Froto:~# apt install debsums The following packages were automatically installed and are no longer required: proxmox-headers-6.17.13-2-pve...
-
NOne small thing to know (same as almost all vGPU/SR-IOV setups): the physical HDMI/DP ports cant be used in the VM's. You’ll access the VMs via Parsec, Moonlight, Looking Glass, or RDP/SPICE. The VMs themselves still see a full normal GPU inside...
-
Eeneref posted the thread Display quarantine emails by recipient domain? in Mail Gateway: Installation and configuration.Is it possible to display quarantine emails by domain, either via some trickery I've not discovered in the UI or via CLI? We're evaluating PMG as a spam solution, and we manage 400 domains. A lot of domains get identical spam emails from random...
