Latest activity
-
EEric Thornton posted the thread MTU Settings for NAS storage in Proxmox VE: Networking and Firewall.Setting up a new Proxmox cluster and were adding a NAS shared storage wondering if we should set the MTU to 9000 rather than 1500. we are using 10g networking to the switch.
-
Wwhiterabbit replied to the thread [SOLVED] pmg8to9-Warnung: Failed to resolve hostname --> Upgrade-Probleme.Weiß hier niemand weiter?
-
Aalexskysilk replied to the thread Proxmox and Veeam Backup and Replication worker issue.what @bbgeek17 suggested should have been the first thing Veeam support instruct you to do. That kind of experience with their support (and other things) have led me to abandon using Veeam with PVE.
-
Aalexskysilk reacted to bbgeek17's post in the thread Proxmox and Veeam Backup and Replication worker issue with
Like.
I recommend that you figure out a curl based way to upload a file to local storage with the same account that Veeam is using. Run it local to PVE first, if that works - run it from the Veeam network segment. If that works, convert it to PS... -
Ffeerlessleadr reacted to rage's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
I read that Kernel 7 has now SR-IOV already enabled. Any hint how to use / enable it ? I would need it for the intel iGPU (265H)
-
JJohannes S replied to the thread PBS Incremental Backup.And for lxcs (and file-based backups) you can set the change-detect-mode to metadata which will be used to detect already backed up data and should speedup the backups accordingly. The real question you should ask yourself which kind of...
-
JJay Hova replied to the thread [SOLVED] SSD screws up Proxmox boot.The drive is in fact an NVMe drive. "Adding (or removing) PCI(e) devices can change the PCI ID of the other devices. This can break an existing setup when you add the drive. Also, make sure the drive is in a separate IOMMU group." Not sure how...
-
JIf you only have one (repeated) backup job for a VM then Proxmox keeps track of which disk blocks have changed and PBS does not need to read the other disk blocks. This is reset when you stop and restart the VM, reboot or another backup jobs runs.
-
KKevin Krause replied to the thread ToughArmor MB902SPR-B R1 wird nicht erkannt.Die 10W habe ich gemessen. Hier noch das Bild, die Alu-Kiste Mitte links:
-
-
Rrage replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.I read that Kernel 7 has now SR-IOV already enabled. Any hint how to use / enable it ? I would need it for the intel iGPU (265H)
-
bbgeek17 replied to the thread Proxmox and Veeam Backup and Replication worker issue.I recommend that you figure out a curl based way to upload a file to local storage with the same account that Veeam is using. Run it local to PVE first, if that works - run it from the Veeam network segment. If that works, convert it to PS... -
Aandreisrr replied to the thread How migrate from IBM Tivoli / Spectrum protect to PBS?.So it's pretty much as I figured: 1) set current backups to be run by PBS instead 2) make full restores from TSM (what is not in current) and then send them to backup in PBS 3) have tape devices managed by PBS directly - well, this surely was...
-
Aacsinc replied to the thread Proxmox and Veeam Backup and Replication worker issue.dir: local path /var/lib/vz content import,vztmpl,snippets,rootdir,images,iso,backup shared 0 lvmthin: local-lvm thinpool data vgname pve content images,rootdir esxi: ACS server...
-
Wwaltar reacted to bbgeek17's post in the thread How to configure HA to shut down specific VMs before migration in Proxmox VE 9.1? with Like.
That really defeats the primary goal of the HA subsystem. Plus it would only work in a managed migration. As you can imagine on node failure there will be no way to either shutdown or live-migrate the VM. If you are only looking to address...
-
bbgeek17 replied to the thread Proxmox and Veeam Backup and Replication worker issue.post your /etc/pve/storage.cfg Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread LCAP LAG Not Working.Hi @Bones558 , welcome to the forum. There could be multiple issues that affect your connectivity. For example, you have two interfaces on the same network segment. This will lead to confusion and unpredictable results, like the ones you are...
-
Rreah posted the thread Two GPU and their assigment to /dev/dri/renderD... in Proxmox VE: Installation and configuration.Hello, I am running a Proxmox host (9.1.7) with two GPUs (AMD iGPU and NVIDIA dGPU (well actually three when counting the BMC's VGA)). I'm using them in different LXC which works flawless. The iGPU I use for Jellyfin transcoding, assignment is...
-
Aaryan.sx replied to the thread Proxmox node keeps rebooting.The only ran the "PVE Post Install" script from the community-scripts.org website, an ubuntu lts server vm, and pihole. I will try and disable this service while it is online to see if that fixes the issue. I will setup another node today and...
-
Aacsinc replied to the thread Proxmox and Veeam Backup and Replication worker issue.That was a good idea, but same result.
-
SteveITS replied to the thread [SOLVED] Changing corosync address.Corosync is unrelated to the PVE web GUI, though of course necessary for a cluster. See if this thread helps: https://forum.proxmox.com/threads/change-cluster-nodes-ip-addresses.33406/post-163795.
