Latest activity
-
Kkryrena replied to the thread Cluster setup and HA configuration suggestions.Thank you. This way the NVMe and HDD storage remain independent, so the HDD can act as a backup correct?
-
Kkryrena replied to the thread Cluster setup and HA configuration suggestions.R630 wont be part of the storage CEPH, it will run independent, non critical machines. The intel server has 6x 1.92TB NVMes. The shared storage shall be between the R640 (8x 1.6TB NVMe) and the Intel (6x 1.92TB NVMe), but if its better to work...
-
JJohannes S reacted to GMBauer's post in the thread Windows 2019 Server Import aus einem ESXI 6.5.0 with
Like.
Lies bitte die beiden verlinkten Quellen aus #8. Das sind drei, vier Bildschirmseiten zu lesen, das musst du selbst schaffen. Du hast so viel Blödsinn in deiner Konfiguration, kein Wunder dass das nicht läuft. Ich bin jetzt ehrlich bissi... -
Pplurgi95 replied to the thread [SOLVED] Proxmox + Windows VM.Oh JA sorry mein Fehler. Sind Tatsächlich nur SSDs weil aber immer von NVMes Die Rede war hab ich dass so übernommen.. Und SDA/SDB sind die beiden Boot Mirror Laufwerke ja. Ja Gut dazu müsste ich den Host runterfahren, dass geht erst gegen...
-
TTheGoat replied to the thread [SOLVED] Fencing Status after HA update.Thank you Fiona and Dakralex!! Appreciate the fast resolution!
-
GGMBauer replied to the thread Windows 2019 Server Import aus einem ESXI 6.5.0.Lies bitte die beiden verlinkten Quellen aus #8. Das sind drei, vier Bildschirmseiten zu lesen, das musst du selbst schaffen. Du hast so viel Blödsinn in deiner Konfiguration, kein Wunder dass das nicht läuft. Ich bin jetzt ehrlich bissi...
-
cwt replied to the thread [SOLVED] Proxmox + Windows VM.Das sind SSDs, nur am Rande. sda & sdb sind wahrscheinlich die beiden Boot Mirror Laufwerke? Wenn die Firmware von BIOS, iLO und Controller aktuell ist, würde ich im nächsten Schritt einen Full Report des SSA ziehen und analysieren. Ebenso mal... -
dcsapak replied to the thread Prox9.1.1 PCI passthrough not working properly..could you also try with a linux guest? just to rule out it's a windows and/or guest driver related issue? -
GGMBauer replied to the thread ToughArmor MB902SPR-B R1 wird nicht erkannt.Hänge doch mal das Raid auf einen der anderen SATA-Anschlüsse, bzw. probiere die durch. Für mich ist das ein Treiber-Problem von Debian / Proxmox mit dem ASmedia ODER dem eingebauten LowEnd-Chipsatz. Ganz wichtig: Die SATA-Anschlüsse sind im BIOS...
-
Mmp.plusserver replied to the thread ceph manager crashing on 19.2.3.Hi @cfgmgr, I stumbled over Your post while searching for "ceph-mgr chrashes" in this forum. We have a three node cluster that shows the same behaviour in the last couple of days: ceph crash info...
-
cheiss replied to the thread Custom ISO 9.1.1 image with r8168-dkms baked in?.Hi, no, not directly. If using the automated installer is an option, then building something with the First Boot Hook might be possible. But using a DKMS module complicates this quite a bit. This (usually) requires enrolling a custom key into... -
dcsapak replied to the thread [SOLVED] Proxmox vGPU set-up troubleshooting.answered in your other thread: https://forum.proxmox.com/threads/proxmox-vgpu-configuration-troubleshooting.182337/ please don't double post in the future
-
RRheinold replied to the thread Windows 2019 Server Import aus einem ESXI 6.5.0.habe ich jetzt gemacht und lande dann beim Start im Menue in dem ich Problembehandlung auswählen kann, oder PC ausschalten.
-
fiona replied to the thread [SOLVED] Fencing Status after HA update.Hi, I was able to observe the same issue when trying with Chromium. Patch sent: https://lore.proxmox.com/pve-devel/20260407102518.57975-1-f.ebner@proxmox.com/T/ -
Ggfngfn256 reacted to t.lamprecht's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
Why? it's purely accounting cosmetic issue and it's a test repo. Exactly this is why it's still valuable to keep it out there.
-
Ddriley replied to the thread Using Discord for Notifications.Hi, the following setup worked for me: Method: POST URL: https://discord.com/api/webhooks/<webhook.id>/<webhook.token> Headers: Key: "Content-Type", Value: "application/json" Body: { "content": "Proxmox Test Message" } Have a look at...
-
fiona replied to the thread [SOLVED] CephFS mit dem Kernel 6.17.13 führt zu Kernel Trace.Yes, it very much looks like the same issue. The fix was applied in git, so will be part of the next kernel build. Until such a build is available, it's recommended to use the 6.17.4-2-pve kernel.
-
Ggfngfn256 replied to the thread Reboot stuck on GRUB and reinstall attempt doesn't get past Install screen.To correctly test the RAM - I believe you need to let it complete at least 4 passes & probably more. This will take a long time (as in numerous hours). Check online to see users who have only found errors after many passes & hours of testing.
-
Ssherminator replied to the thread Debian 13 guests freezing on reboot.:D So after about two weeks I'm pretty sure that changing "Display" to "VirtIO-GPU" solved this issue for me.
-
Mmonkfish reacted to t.lamprecht's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
Why? it's purely accounting cosmetic issue and it's a test repo. Exactly this is why it's still valuable to keep it out there.