Latest activity
-
Mmihsu81 replied to the thread free Starwind x Proxmox SAN storage plugin.I have been using it in a test environment with 3 PVE nodes as a replacement for LVM, over an iSCSI multipath connection to 2 Compellent data stores that present multiple Highly Available live volumes. It has proven very reliable and has all the...
-
UdoB replied to the thread Subscriptions and new hardware.You should really ask https://shop.proxmox.com/contact.php for a recommended/safe procedure. Probably you are not the first person with this "problem". Please post their answer here :-) -
MMalvern Masiye posted the thread change a Proxmox Virtual Environment (PVE) virtual machine running Windows Server Standard 2022 from Legacy (SeaBIOS) to UEFI (OVMF) in Proxmox VE: Installation and configuration.Microsoft is updating the Secure Boot certificates originally issued in 2011 to ensure that Windows devices continue to verify trusted boot software. Because our servers are still running in Legacy BIOS mode, we must transition them to UEFI boot...
-
PPwrBank replied to the thread NTFS driver issues with restores.Ran through the following test: Cloned the VM with the issue with all disks Started the VM Created a backup to the same backup destination Tried file restore -> Same results as the original VM Ran chkdsk /f f: on the VM and waited for the...
-
Mmihsu81 reacted to alma21's post in the thread free Starwind x Proxmox SAN storage plugin with
Like.
Hi, I have installed and tested the free / open source Starwind Proxmox SAN storage plugin on a small testcluster (PVE 8) with shared block storage and it works really good .... thin provisioning, snapshots, thin disk auto extension, live... -
Mmfederanko replied to the thread Proxmox 8.4.1 corrupted, unable to recover backup, to restore vm in another proxmox.Thanks for clarifying. Is PBS running inside a VM or is it installed alongside PVE? Can you post the outputs of the following commands: * pvecm status * pvesm status * systemctl status pvestatd.service * systemctl status proxmox-backup.service...
-
MMalvern Masiye posted the thread Change a Proxmox Virtual Environment (PVE) virtual machine running Windows Server Standard 2022 from Legacy (SeaBIOS) to UEFI (OVMF). in Proxmox VE (Deutsch/German).Microsoft is updating the Secure Boot certificates originally issued in 2011 to ensure that Windows devices continue to verify trusted boot software. Because our servers are still running in Legacy BIOS mode, we must transition them to UEFI boot...
-
UdoB replied to the thread Bester Weg Datenrettung Raid & ZFS unter PM.Dann darfst du "sudo" einfach ignorieren. Komplett. Mehr Rechte als "root" geht ja nicht ;-) Offenbar ist irgendwas an deiner Installation anders als üblich. Der Such-Pfad sollte so aussehen: ~# lsb_release -c; echo $PATH Codename: trixie...
-
IIsThisThingOn replied to the thread I/O stall while backup to PBS is running and fdatasync failure after backup fails.It probably does not need one. If you have Wireguard (probably over IPv4) there is a public IPv4 and you can probably use port 8007 or something like that, which you then NAT to the local IPv4 of your PBS. Or even better, most ISP offer static...
-
IIsThisThingOn reacted to PaoloBarbolini's post in the thread I/O stall while backup to PBS is running and fdatasync failure after backup fails with Like.
The current PBS does not have a public IP address. I'm planning to add a second PBS with a good connection, and then have the original one sync from the new one. That would make it possible to restore the bigger VMs without having to wait almost...
-
Jjabuzzard replied to the thread Subscriptions and new hardware.That is exactly what I am trying to avoid, having my cluster in a state where it is not getting updates. Support is less of an issue as I am unlikely to use it. Lack of updates however in the cyber security environment of 2026 is something of a...
-
EErnst T. replied to the thread Bester Weg Datenrettung Raid & ZFS unter PM.Du hast einen kleinen TippFehler. Der Behehl heisst: which mdadm
-
SteveITS replied to the thread Subscriptions and new hardware.Can you remove it from the original and not install updates for a few weeks? Though I suppose support is a different matter. -
Ffettfoen replied to the thread Delete VM in PVE but preserve backups of VM in PBS.It would be nice if there was a button to also delete the backup in PBS :)
-
Cchrispage1 replied to the thread [SOLVED] VXLAN ARP timeouts.Thanks. I did actually have that option checked however I dont think our upstreams are importing anything greater than /32. For now I'll stick with a nice simple ping. For those that might come across this in the future (perhaps even my future...
-
Ssantiagobiali replied to the thread W2025 virtio NIC -> connection drop outs.Added a NIC to a VM today and it got the 285 driver version and had to manually roll it back to 271, so I came up with a script to remove those Virtio drivers other than 271...
-
Ddan_73 replied to the thread How to Customize the Proxmox VZDump Email Notification Format for Backup Summaries..Hi to all I also use PVE 9.1.6 and I'd like to customize the object of email backup, because today it is reconnized as spam with my french provider. Today it is written like this : Subject: vzdump backup status (proxmox.b4.local): backup...
-
Rrelsupport replied to the thread Proxmox 8.4.1 corrupted, unable to recover backup, to restore vm in another proxmox.i will tell you 3 days story. 1) we seen after login promox everywhere "?" marks comes 2) we tried aggressively recover the zpool with command, but nothing happened 3) we have total 12 SAS HDD , and 2 SDD. promox OS in SSD and rest of the disk is...
-
-
gurubert replied to the thread OCFS2(unsupported): Frage zu Belegung.Warum sollte Multipathing den discard-Befehl nicht weitergeben? Bzw sollte das Discard ja die qcow2-Datei im OCFS2 kleiner machen. Auf der Ebene hat das mit Multipathing zum SAN ja noch gar nichts zu tun. Wenn das SAN-Storage selber die LUN... -
Ooefchen replied to the thread Bester Weg Datenrettung Raid & ZFS unter PM.Muss ich denn an die Partitionstabellen um den Raid zusammen zu setzen ? Ich hoffe nicht :) Meine Hoffnug war: Einmal die Infos der Platten lesen, Raid zusammen setzen und Daten wegkopieren.... Nö ?
