Latest activity
-
Vvaschthestampede replied to the thread Lost Task!.No, the 1000 was on the pveEDGE node. It is. root@pdm:~# journalctl -u proxmox-datacenter-manager-api -e ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~...
-
-
11v1lolonline replied to the thread webfrontend.Ich habe mich mit genau dem Setup auch beschäftigt und fand es anfangs etwas verwirrend, weil Proxmox das nicht direkt mit einer “einfachen” Einstellung löst. Man muss das Management-Interface bewusst an die richtige Bridge (vmbr1) binden, dann...
-
Pparallax replied to the thread Network hickups during backup.If the USB bus crashes, i guess that all VMs and the host have issues at that moment. That seems not to be the case VMs show network unreachablility at the moment of backup/snapshot. I run Gatus to monitor them and the times of outage is not the...
-
Ggfngfn256 replied to the thread Network hickups during backup.OK. But you mention that the VM/s become NW compromised - so if the USB bus crashed - that would amount to the same. Does the PVE host also become NW compromised at that time? Of the 64GB ram how much is left allocated for the PVE host?
-
Ddekiesel reacted to Bu66as's post in the thread [SOLVED] Kann VM nicht starten wenn dataset, das nichts mit der VM zu tun hat busy ist? with
Like.
PVE macht bei der Aktivierung von verschlüsselten ZFS-Storages intern ein zfs mount -a, ist ne globale Operation über alle Pools. Wenn irgendein Dataset busy ist (dein send|receive auf data_mirrored_2_3), knallt das und PVE wertet das als Fehler... -
Ddekiesel reacted to Bu66as's post in the thread [SOLVED] Verschlüsseltes dataset verhindert boot? with Like.
Guter Fix! Das -a bei zfs load-key ist halt das Problem, weil er dann auch rpool/enc laden will und auf die Passworteingabe wartet. Dein Ansatz mit dem expliziten Dataset im Service ist sauber gelöst. Zur Bonusfrage: Das subvol-123-disk-1 erbt...
-
spirit reacted to IsThisThingOn's post in the thread I/O stall while backup to PBS is running and fdatasync failure after backup fails with Like.
Why? Transmission is encrypted, you don't need Wireguard. I reframe that so it gets easier for a beginner to understand. I know this, because I only learnt that a few days ago :) When the backup is running, and the VM wants to do a write, the... -
dcsapak replied to the thread Lost Task!.hi, was the vm 1000 located on another node perhaps? or is the 'pveEDGE' remote just a single node? can you show what the 'pveEDGE' tasks (on the pve gui, not pdm) looks like? -
Vvaschthestampede posted the thread Lost Task! in Datacenter Manager: Installation and configuration.With pdm I migrated 4 VMs and an LXC but I'm missing one in the Tasks list. In order I migrated the 2002, 1000, 1001, 3004 and finaly 103 (the only LXC). But in the migration tasks in the original node I only find the 2002, 1001, 3004 and 103...
-
-
Pparallax replied to the thread Network hickups during backup.That is not the case, i have an onboard NIC that i use. As mentioned: all usb devices passed to VMs and are not in use on the proxmox host
-
Ooefchen replied to the thread Bester Weg Datenrettung Raid & ZFS unter PM.Moin moin... ich renne wohl wieder in das selbe Problem wie in meinem ersten Versuch.....ich versteh die PATH Angaben nicht. mdadm ist direkt auf dem PVE installiert, aber ein Befehl führt zur gleichen Meldung: -bash: mdadm: command not found...
-
@spirit: Thank you for the concrete numbers and references — that's very helpful. I was wrong to be dismissive earlier about the allocator angle. The Ceph blog you linked (QEMU/KVM Tuning) reports a ~50% improvement on 16KB random reads (53.5k →... -
Ggfngfn256 replied to the thread Network hickups during backup.So you are using NW connection via USB - this is most likely your issue on the Mini PC. Those miniscule chipsets don't handle very well under load - and can/do crash USB buses. You may want to check temps too.
-
HHonk2006 replied to the thread Sync zu s3 wasabi bricht ab.Hi, brauchst du noch mehr?
-
LnxBil replied to the thread Thin provisioning not reflected in Proxmox LVM shared storage over FC multipath.No, you have to have proper integration from the SAN vendor in order to do this. Thick LVM justs sees the storage as used, as you described. No, storage is assumed to be thick and reporting correct values is a SAN problem. Ask your SAN vendor... -
Nnamthp replied to the thread Thin provisioning not reflected in Proxmox LVM shared storage over FC multipath.I’m running into the same issue as you. Has anyone here managed to resolve it yet? :(
-
GI am new so no need to apologize and no offense taken. I joined the forum to share this in case anyone else needed it. The full code is open source so anyone is welcome to clone and take it apart. The whole reason I put this together was that I...
-
Nnamthp reacted to danht1710's post in the thread Thin provisioning not reflected in Proxmox LVM shared storage over FC multipath with Like.
Hi team, I’m running a 4-node Proxmox cluster (version 9.1.6) connected to a Pure Storage SAN over FC (32Gb, dual port) using multipath. On the SAN side, volumes are configured with thin provisioning and data reduction. I present LUNs to all...
-
Ddanht1710 posted the thread Thin provisioning not reflected in Proxmox LVM shared storage over FC multipath in Proxmox VE: Installation and configuration.Hi team, I’m running a 4-node Proxmox cluster (version 9.1.6) connected to a Pure Storage SAN over FC (32Gb, dual port) using multipath. On the SAN side, volumes are configured with thin provisioning and data reduction. I present LUNs to all...
-
Pparallax replied to the thread Network hickups during backup.Something very strange i've noticed and i don't know if it makes sense, but it's the following: As soon as i change settings in the backup job, like yesterday, i disabled all limitations that were in place to check the kernel logs. Most of the...
