Latest activity

  • B
    Bu66as replied to the thread SFP+ optic incompatible.
    Bei den Emulex/OneConnect Karten sitzt die Optic-Validierung leider in der Firmware, nicht im Treiber. Da gibts kein einfaches modprobe-Flag wie bei Intel mit allow_unsupported_sfp. Dass es beim Installer ging ist komisch, evtl wurde da der...
  • B
    Bu66as replied to the thread zu wenig Speicherplatz?.
    @artex, du musst die Befehle als root ausführen. Entweder mit sudo su - erst eine Root-Shell holen oder sudo du -shc /* | sort -h nutzen. Auf der Proxmox-Shell (WebGUI > Node > Shell) bist du automatisch root.
  • P
    Das ist wahrscheinlich NetworkManager, der das Interface nur aktiviert, wenn jemand eingeloggt ist. Typisches Ding bei VMs, die von ESXi rübermigriert werden. Check mal ob NM läuft mit systemctl status NetworkManager. Wenn ja, am einfachsten auf...
  • P
    Stimmt, hatte ich jetzt auch gesehen - danke für euren Input, konnte nachdem ich den NetworkManager deaktiviert hatte und die Config manuell aufgesetzt hab das Problem lösen! Vielen Dank hier an die Runde!
  • M
    Danke. JA das Board kann mehr. Nur bei den aktuellen Preisen wollte ich erst mal mit 16 machen. Backup sollte USB Platte ja reichen. Da hab ich noch genug rum liegen. Reicht ja wenn ein Backup da vom NAS macht, oder? Aktuelle Auslastung mit...
    • Omada.jpg
  • S
    silke reacted to meyergru's post in the thread OPNsense with VLANs on Proxmox with Like Like.
    That step is already covered even earlier, in the READ ME FIRST.... point 3. As you already found, there is lots to learn here. And you absolutely need to have the building blocks internalized before going to more complex scenarios.
  • B
    Die ACME-Integration in PVE ist nur für das Webinterface-Zertifikat gedacht, deploy-hooks sind da nicht mit drin. Am einfachsten: acme.sh standalone in nem LXC installieren und da wie gewohnt mit den deploy-hooks arbeiten. Dann hast du den...
  • B
    Synology nutzt unter der Haube ganz normales Linux-mdadm, sollte also gehen. Erstmal checken, was die Platten haben, direkt auf dem PVE-Host: mdadm --examine /dev/sdX (für jede der 4 Platten einzeln durchgehen) Bist du sicher, dass es RAID0 war...
  • B
    Das Problem ist, dass sda5 in der Extended Partition sda2 steckt, und die ist noch auf 99G. Du musst erst die Extended vergrößern, dann die Logical, dann LUKS + LVM anpassen: growpart /dev/sda 2 growpart /dev/sda 5 cryptsetup resize sda5_crypt...
  • bbgeek17
    bbgeek17 replied to the thread [SOLVED] ISO Storage.
    No worries! If you think your question is solved, feel free to mark this thread as Solved by editing the initial post and selecting the appropriate subject prefix. This will help to keep the forum tidy. Cheers Blockbridge : Ultra low latency...
  • B
    Das ist wahrscheinlich NetworkManager, der das Interface nur aktiviert, wenn jemand eingeloggt ist. Typisches Ding bei VMs, die von ESXi rübermigriert werden. Check mal ob NM läuft mit systemctl status NetworkManager. Wenn ja, am einfachsten auf...
  • S
    Danke für die rasche Antworten @Johannes S 32GB hat auf der Hardware schon gereicht, nun wir machen uns sorgen ob 32GB ausreichen wird denn 64GB wird empfohlen. Wir haben eine virtuelle Proxmox zu zwei physischen auf unserer VMWare Infrastruktur...
  • B
    Moin, Hardware ist okay, aber 16GB könnten eng werden wenn du NAS-VM, Omada, ioBroker und noch nen Mail-Archiver drauf packen willst. Schau mal ob das CWWK Board 32GB kann, würd ich direkt machen. Als NAS-Software in ner VM: OpenMediaVault...
  • B
    Bu66as replied to the thread Disks LVM 100%.
    Die roten Balken zeigen nur dass die VG komplett dem ThinPool zugewiesen ist, das ist erstmal nicht schlimm. Solange im ThinPool selbst noch genug Platz frei ist, läuft alles normal. Für Updates (8→9) ist eher der Platz auf der Root-Partition...
  • M
    Hi, I was not involved in the decision, but AFAIK one of the main reasons was hardware support: https://wiki.ubuntu.com/Kernel/LTSEnablementStack It's not going to be officially supported if you use your own kernels. And note that most kernels...
  • M
    besides hardware support and having a fairly "recent" kernel version, the other big point back then was that with the switch from OpenVZ to LXC as container stack, we needed good apparmor and namespace support. not all desired apparmor and...
  • J
    j.palm reacted to ce3rd's post in the thread Proxmox HPE Alletra Support with Like Like.
    hi, gerade im englischen forum gesehen - könnte für dich interessant sein https://forum.proxmox.com/threads/hpe-nimble-storage-proxmox-ve-%E2%80%94-custom-storage-plugin-iscsi-multipath.181958/ https://github.com/brngates98/pve-nimble-plugin
  • T
    I have the same problem. I updated it with standard Debian commands, but it did not work. After that i could log into Nextcloud. Lucky for me i took a snapshot before doing the install, so i am back up and running
  • N
    n10ev replied to the thread Lose Access after every Restart.
    First - my mistake, you have eno4, but I talked about eno5... sorry, but I think that you get the idea. > so i disconnected 1 interface and left 1 interface connected and restarted proxmox server to verify and once again right after restart i...
  • P
    Ist auf der VM ein X-Windows System installiert - dann könnte es sein, das es in den Suspend geht.