Latest activity
-
Wwaltar replied to the thread OCFS2(unsupported): Frage zu Belegung.Interessanter und lustiger thread ... da fällt mir noch eine Antwort von HPE Sofia bzgl. eines damaligen Tape Library + Backup-SW (beides HP) Tickets ein, welches so endete: "... Zu ihrem Problem gibt es keine Lösung. Deswegen lohnt es sich auch...
-
TBy default /etc/ceph/ceph.conf is a symlink to /etc/pve/ceph.conf which makes it the same on each cluster node. AFAIK it is easier to use ceph config set to set the values in the config db for each Proxmox node. ceph config set client.HOSTNAME...
-
LLLang replied to the thread OCFS2(unsupported): Frage zu Belegung.Ich folge dieser Meinung ja auch. Ich frage mich nur warum nirgends so wirklich ausdrücklich darauf hingewiesen wird.
-
gurubert replied to the thread Ceph - VM with high IO wait.By default /etc/ceph/ceph.conf is a symlink to /etc/pve/ceph.conf which makes it the same on each cluster node. AFAIK it is easier to use ceph config set to set the values in the config db for each Proxmox node. ceph config set client.HOSTNAME... -
mariol replied to the thread Spam report on Mobile - iOS (iPhone) = Blank.A shot in the dark: Could it be that the PMG is running behind a Nginx proxy [0]? Restrictions in nginx/api2 are likely blocking endpoints required by the mobile user interface. In PMG 9, some WebUI calls were modified (especially for the... -
“Status stopped” means that the task is not running. There is no rating at this point. A rating appears after the “:”. Status stopped - OK Status stopped - interrupted by signal Status running You could also say “successfully interrupted by... -
UdoB reacted to Johannes S's post in the thread [SOLVED] How to enable processor support for the following instructions: SSSE3, SSE4.1, SSE4.2, and POPCNT? with
Like.
This tool by @gyptazy is quite helpful for determining the right CPU type: https://github.com/credativ/ProxCLMC/ -
gurubert replied to the thread OCFS2(unsupported): Frage zu Belegung.Würde ich so auch vermuten.
-
fireon replied to the thread Suggestion.“Status stopped” means that the task is not running. There is no rating at this point. A rating appears after the “:”. Status stopped - OK Status stopped - interrupted by signal Status running You could also say “successfully interrupted by... -
XXande replied to the thread SSD als ext4 mounten und an OMV durchreichen.Das habe ich gemacht und auf meinem alten Server ging das auch prächtig... da läuft aber ein Ubuntu mit SMB und Webmin drauf. Aber wie schon gesagt... so werde ich es auch wieder machen. Ich arbeite mich in Proxmox über weniger wichtige Projekte ein.
-
XXande replied to the thread SSD als ext4 mounten und an OMV durchreichen.Hi, Hab ich probiert, aber aus irgend einem Grund bekomme ich das nicht hin mit dem Pool. Und mit LVM will mir Proxmox auch immer nur eine SSD pro Volumegroup einbinden. das Ziel ist ein passives (leises) MiniITX Board (mit 4 SATA Ports) als...
-
UdoB replied to the thread OCFS2(unsupported): Frage zu Belegung.Disclaimer: ich betreibe nichts entsprechendes. Die koordinierende Instanz innerhalb eines Clusters ist die PVE-middleware, nicht etwa das Target. Ein Cluster weiß aber nichts von dem anderen. Und da hilft vermutlich auch kein PDM. Der ist in...
-
TThierryIT69 posted the thread Using PBS with a Unifi NAS ?? in Proxmox Backup: Installation and configuration.Hello, I am not very lucky with this NAS. I am not able to add a new datastore on a fresh install PBS. I do have this problem on a standalone pc or on a VM. What I did on both pc/vm: - Update PBS after installing it. - add the IP of my PBS to...
-
Rrothkraut reacted to Johannes S's post in the thread Questions regarding Corosync and Q-Device with Like.
Using the same qdevice is no problem as long your network setup ensures that each node can reach the qdevice. For example in my homelab my cluster has two corosync networks (main and fallback) but the qdevice is on a completely different subnet...
-
Rrothkraut replied to the thread Questions regarding Corosync and Q-Device.Yes I want several diffrent cluster to use the same IP subnets. But I do see your point. It would be better organized to have diffrent subnets for each cluster. But since there isn't a technical reason to avoid this, I will go with this setup for...
-
HHamlet posted the thread OMV VM - SMB sharing - takes times to refresh on Windows folder in Proxmox VE: Installation and configuration.Hello, I have a home PC used as basic NAS/Server with Proxmox. It has 2x internal SATA, NTFS HDDs that I want to share to my Proxmox containers, VM, and also my local Windows network. I currently set up the following : - OpenMediaVault (OMV) as...
-
DDeerom replied to the thread Recurrent PVE node crashes after enabling IOMMU on Supermicro AMD hosts with Intel X710 (i40e).Hi, We've had similar issues in the past with X710 chipsets, where we've encountered hundreds of I40E_AQ_RC_ENOSPC errors a few minutes after a node has booted into Proxmox. In our case this wasn't a problem with kernels, firmware or even...
-
SHi @Singman, your backup is a tar file and not a vma file, that's why the vma-to-pbs tool complains. See also: https://forum.proxmox.com/threads/how-to-migrate-existing-backups-to-pbs.142587/post-662622 As for the restore error, please see...
-
Hhek2 reacted to jaminmc's post in the thread [TUTORIAL] Unofficial Kernel 7.0.0 RC3 Proxmox test. with Like.
My kernel journey began when my 2014-era low-power mini PC (Haswell i3-4030U with 8 GB RAM) started failing to passthrough NIC cards properly. I rely on this system as my main router and run additional services on it. After kernel 6.11, a change...
-
Vvirgo47 replied to the thread Disable server shutdown/restart from the web interface.We just shut down our node after clicking on the VM line in Search. Of course we didn't read the popup. Our fault - but those node-level controls really should look more ominous. E.g. have them on separate page, like some kind of IPMI. Or at...