Latest activity
-
TTobiTobs posted the thread [SOLVED] Force TLS on all inbound/outbound connections in Mail Gateway: Installation and configuration.Hi everyone, we want to further narrow down our security and want to only allow TLS connections on our PMGs from now on. There is the option to specify inbound/outbound domains, however I did not find a way to enter a wildcard here, only...
-
TTimofeyL posted the thread How to clenup unavailable VMs from cluster, if node was lost? in Proxmox VE: Installation and configuration.We lost the one server from cluster, but VMs haven't been restarted on another nodes. We deleted broken node from cluster by "pvecm delnode" and fully redeployed one. After joining into the cluster I see 5 VMs assigned to this node in gray...
-
-
SSteveITS posted the thread Pull sync datastore by date, or partial sync in Proxmox Backup: Installation and configuration.Is there a way to sync by date, to pull to the off-site PBS? For instance instead of syncing a year of backups, one might sync "since yesterday" and then forward from there, which would be a dramatically smaller transfer, and then small daily...
-
SSteveITS posted the thread fstrim doesn't run on datastore mounts in Proxmox Backup: Installation and configuration.I noticed on a PBS Hyper-V VM, ext4 disk, trim wasn't running on the datastore drive. File /usr/lib/systemd/system/fstrim.service has line: ExecStart=/sbin/fstrim --listed-in /etc/fstab:/proc/self/mountinfo --verbose --quiet-unsupported...
-
Eedurbs replied to the thread [SOLVED] S3 local cache.I solved it by enabling quota in xfs and creating a project for it. echo "100:/mnt/pve/hdd/s3" >> /etc/projects echo "s3:100" >> /etc/projid xfs_quota -x -c 'project -s s3' /mnt/pve/hdd mount -o remount,pquota /mnt/pve/hdd xfs_quota -x -c 'limit...
-
JJohannes S replied to the thread Onboard Sata Controller durchreichen, wo finde ich ihn?.Das Problem ist, dass (siehe Link im TrueNas Forum Punkte 3 und 4) auch nicht ganz unproblematisch ist ;) Wenn man sich dessen bewusst ist und mit den Einschränkungen/Risiken leben kann, go for it, meyergru hat da ja oben was zu geschrieben. Aber...
-
JJohannes S reacted to GMBauer's post in the thread Onboard Sata Controller durchreichen, wo finde ich ihn? with
Like.
Ihr seid minimal vom Thema abgekommen. NAS aufm Proxmox funktioniert auf alle Fälle, hab ich auch schon mehrfach aufgesetzt. Mit einem durchgereichten SATA-Controller fahren die auch runter, aber WOL widerspricht sich ja selbst, weil man das... -
JJohannes S reacted to alexskysilk's post in the thread Make a Proxmox NTFS HDD accessible under Windows network (Windows Explorer) with Like.
Yes. In your use case, you have the option to have samba served either at the PVE level or in a container/vm. having PVE serve samba works well in a homelab environment, BUT you will need to manage users and access by hand. having a "NAS" distro...
-
Jjokergermany replied to the thread igb NETDEV WATCHDOG - Network Interface is crashing with 6.17.I got the Info that it's probably a kernel bug and opened a bug: https://bugzilla.proxmox.com/show_bug.cgi?id=7416
-
Jjaminmc replied to the thread [TUTORIAL] Unofficial Kernel 7.0.0 RC3 Proxmox test..My kernel journey began when my 2014-era low-power mini PC (Haswell i3-4030U with 8 GB RAM) started failing to passthrough NIC cards properly. I rely on this system as my main router and run additional services on it. After kernel 6.11, a change...
-
gurubert reacted to Marco83's post in the thread Proxmox SDN Traffic breakout Interface and routing with Like.
I was thinking abaou PBR (policy-based routing)—i.e., forcing SDN traffic out through a different NIC. Right now, in my cluster the management VLAN/interface has the default route, which means the SDN traffic would break out into my management... -
FFrankyT reacted to minorsatellite's post in the thread Dell Mellanox ConnectX-5 CX562A 25Gbps Dual Port with Like.
After further investigation it appears that the brand new Mellanox card is defective. Still waiting to hear back from Dell support.
-
GGansmoe replied to the thread [SOLVED] Remove or reset cluster configuration..Should really learn to read to the end before I try. I just joined the dumb ass club :P
-
Mminorsatellite replied to the thread Dell Mellanox ConnectX-5 CX562A 25Gbps Dual Port.After further investigation it appears that the brand new Mellanox card is defective. Still waiting to hear back from Dell support.
-
GGansmoe reacted to hybridlinux's post in the thread [SOLVED] Remove or reset cluster configuration. with Like.
Just so anyone who else stumbles on this from the internet like I did after botching my first attempt to create a cluster - DO NOT USE THIS SCRIPT. The line "rm -R /etc/pve/nodes" will delete all of your VMs and LXCs.
-
Aalefello replied to the thread activating LV 'pve/data' failed: Check of pool pve/data failed (status:1). Manual repair required!.Hello everybody I've the same issue, but lvconvert --repair pve/data fails with output: Volume group "pve" has insufficient free space (480 extents): 4048 required. WARNING: LV pve/data_meta0 holds a backup of the unrepaired metadata. Use...
-
FFrankyT replied to the thread Dell Mellanox ConnectX-5 CX562A 25Gbps Dual Port.I've a bunch of "Ethernet 10/25Gb 2-port SFP28 MCX562A-ACAI OCP3 Adapter" running inside of HPE DL325 Servers on PVE 8.4 without any issues
-
Mmurfasa reacted to kf4hqf's post in the thread Windows 11 Virtual Machine very slow performance with Like.
Just to add my experience with this issue for those who have tried everything and still have sluggish Windows 11 VM performance. The "magic" setting for me was the vIOMMU option in Machine settings. Setting it to Intel in my case made a world of...
-
HHamlet reacted to alexskysilk's post in the thread Make a Proxmox NTFS HDD accessible under Windows network (Windows Explorer) with Like.
Yes. In your use case, you have the option to have samba served either at the PVE level or in a container/vm. having PVE serve samba works well in a homelab environment, BUT you will need to manage users and access by hand. having a "NAS" distro...
-
Aalexskysilk replied to the thread Make a Proxmox NTFS HDD accessible under Windows network (Windows Explorer).Yes. In your use case, you have the option to have samba served either at the PVE level or in a container/vm. having PVE serve samba works well in a homelab environment, BUT you will need to manage users and access by hand. having a "NAS" distro...
