Latest activity
-
Renaud L. reacted to guruevi's post in the thread Any known downsides for using cpu/memory hotplugging? with
Like.
Most applications don’t “understand” the concept of growing or shrinking memory or CPU cores, an OS like Windows for example won’t see the new hardware until reboot making it moot. Linux kernel is fine with it, but the application may not be able... -
Hhotzigetty replied to the thread [TUTORIAL] Easy tutorial for eGPU thunderbolt passthrough on a Minisforum UM790 Pro.So, i'm trrying to use the Ag02 with an ms-01, I get this error using policykit - unsure which of the replacement libraries I have to install though: Package policykit-1 is not available, but is referred to by another package. This may mean...
-
Ssin3vil replied to the thread Cluster retransmit issues.Hello Spirit, thanks for taking the time to reply. The NIC is, normally, not dedicated. Yes, we know. However, during aforementioned tests we had completely disabled the linux bridge for VM traffic and was monitoring both on nodes via iftop and...
-
IIsThisThingOn replied to the thread Fleecing fragen.Danke, das klingt einleuchtend. Dann vermute ich, beim verwenden von fleecing wird nicht die komplette VM disk kopiert oder auf das fleecing device geschrieben, sondern nur diejenigen, die verändert werden?
-
IHi @IsThisThingOn, es gibt keinen Storage-Level Snapshot. Das Ganze wird im QEMU-Block-Layer gehandhabt und deswegen müssen alte Blöcke, die noch nicht im Backup sind, weggeschrieben werden, um einen neuen Write vom Gast zu akzeptieren. Der würde...
-
PProxNoel replied to the thread zstd error 70 - write error - backing up more than 1.2 TiB.Thank you fabian. I will try to change the value and redo the backup!
-
Ggfngfn256 replied to the thread Node showing "?" after NFS VM hangs, qm command stuck.It appears he already did that:
-
Renaud L. reacted to shanreich's post in the thread proxmox destroys working /etc/network/interfaces bond config with Like.
The problem is the name of the interface (MNGT_bond0). Our stack relies on the fact that bonds are named bondX (where X is a number) in order to detect bonds (see [1]). You will see in the UI with your initial configuration, that the bond is not...
-
Nnuttervm replied to the thread Using ZFS commands inside LXC container.Were you ever able to figure this out? I have a similar use case. In my case it is relatively simple - I bind mount a external USB hard drive that is formatted as ZFS to a LXC running Debian 13, and would like to execute ZFS commands from...
-
Ddekiesel replied to the thread [SOLVED] Verschlüsseltes dataset verhindert boot?.Ich habe zfs-load-key.service editiert # cat /etc/systemd/system/zfs-load-key.service [Unit] Description=Load encryption keys DefaultDependencies=no After=zfs-import.target Before=zfs-mount.service [Service] Type=oneshot RemainAfterExit=yes...
-
shanreich replied to the thread proxmox destroys working /etc/network/interfaces bond config.The problem is the name of the interface (MNGT_bond0). Our stack relies on the fact that bonds are named bondX (where X is a number) in order to detect bonds (see [1]). You will see in the UI with your initial configuration, that the bond is not... -
fiona replied to the thread Node showing "?" after NFS VM hangs, qm command stuck.Hi @pulipulichen, see: https://forum.proxmox.com/threads/issues-with-backup-vzdump.20741/post-664154 -
fiona replied to the thread Fleecing fragen.Hi @IsThisThingOn, es gibt keinen Storage-Level Snapshot. Das Ganze wird im QEMU-Block-Layer gehandhabt und deswegen müssen alte Blöcke, die noch nicht im Backup sind, weggeschrieben werden, um einen neuen Write vom Gast zu akzeptieren. Der würde...
-
fiona replied to the thread [SOLVED] My vm runs into internal error.Hi, you marked the topic as resolved. Could you share what the solution was? This could help other people with the same issue in the future. Was there anything about the issue in the system logs?
-
Mmouk replied to the thread proxmox destroys working /etc/network/interfaces bond config.Yeah I added the bonds manually, not through the GUI. then later I edited something network through the GUI, and then all bond definitions were rewritten. (and broken, so after a reboot, the complete system was unreachable)
-
GGMBauer replied to the thread Onboard Sata Controller durchreichen, wo finde ich ihn?.Ihr seid minimal vom Thema abgekommen. NAS aufm Proxmox funktioniert auf alle Fälle, hab ich auch schon mehrfach aufgesetzt. Mit einem durchgereichten SATA-Controller fahren die auch runter, aber WOL widerspricht sich ja selbst, weil man das...
-
Ddekiesel replied to the thread [SOLVED] Verschlüsseltes dataset verhindert boot?.Leider immernoch das gleiche Problem (es sei denn ich habe es falsch gesetzt?)
-
-
JJohannes S reacted to meyergru's post in the thread Onboard Sata Controller durchreichen, wo finde ich ihn? with Like.
Das eine ist m.E. eine Notlösung, wenn man den Fehler gemacht hat, eine Hardware zu kaufen, die eigentlich für OpnSense ungeeignet ist. Besser wäre es natürlich, sich vorab zu informieren ;-) Zu den üblichen Fehlern gehört auch, eine ungeeignete...
-
RMoin zusammen, ich bin noch nicht lange bei Proxmox unterwegs. Wir stellen aber nun unser Cluster von VMWare auf Proxmox um. Bisher hatten wir einen automatisierten Prozess, um Windows-VMs auszurollen. Diese wurden vom User bestellt und kamen...
-
PProxNoel replied to the thread zstd error 70 - write error - backing up more than 1.2 TiB.cephfs
