Latest activity
-
Ppulipulichen replied to the thread How to fix "BAR0 is 0M" error and NVIDIA driver probe failure after GPU Passthrough?.The issue lies within the OVMF defaults. OVMF only reserves a 32GB address space window for 64-bit PCI MMIO by default. When your GPU has a large VRAM (especially 24GB or more), combined with other system resource demands, this default window...
-
Ssin3vil replied to the thread Cluster retransmit issues.bump and shattered hopes
-
CCoMox replied to the thread Retrieving all values from each VM on cluster via pvesh.Good morning, I'm using pvesh get /cluster/resources --type vm to get the resources but machines that have more then one disk don't return 2 or more disks. I always only have "disk": 0 I would expect that information to belong to the machine in...
-
ZI need to optimize the performance of Spcie. Sometimes the connection is fast, but other times it drops frames or lags. Is there an optimal configuration?
-
-
PBei mir läuft ein Proxmox-Rechner zur vollsten Zufriedenheit. Einige Container und 2 VMs. Die Proxmoxversion ist 8.3.3. Regelmässige Backups werden auf ein eingebundenes NAS gemacht. Nun ist bei mir ein Rechner frei geworden und ich möchte ihn...
-
Ssysadminfromhell replied to the thread How to Customize the Proxmox VZDump Email Notification Format for Backup Summaries..Hey there nice work, you got a new version? This doesnt work under 9.1.6
-
JJohannes S reacted to Impact's post in the thread Proxmox Unresponsive due to Full Storage Space with
Like.
As I said, use SSH, not the GUI. Or a keyboard and monitor or IPMI if you have to. -
CCarlos Gomes reacted to gyptazy's post in the thread [TUTORIAL] ProxLB - (Re)Balance your CT/VM workloads across nodes in your Proxmox cluster with Like.
Introduction ProxLB (PLB) is an advanced tool designed to enhance the efficiency and performance of Proxmox clusters by optimizing the distribution of virtual machines (VMs) or Containers (CTs) across the cluster nodes by using the Proxmox API...
-
Ttcnewone replied to the thread PMG mit Unbound und RBLs.zu 3) habe ich einen anderen Thread https://forum.proxmox.com/threads/proxmox-com-dns-status-servfail.181586/ Funktioniert bei mir auch sporadisch nicht. Sollte jetzt aber nicht die Ursache sein 4) bis 6) sind ok was sagt denn dein...
-
Ppeter.vandenabbeele@amsab posted the thread add a second LTO via PCIe passthrough in Proxmox VE: Installation and configuration.LS We have a Proxmox setup with a node (ProLiant DL380 Gen10 Plus) which has 2 LTO-drives connected (via SAS HBA, E208e-p). One drive, already succesfully installed and used since years, on PCI 11:00.0. A second one, recently added on PCI...
-
AAechoOne1 replied to the thread Reject Unknown Senders (reject_unknown_sender_domain) - Whitelist.Good day, nevermind. Domain Whitelist seems to work - my testserver sent with 2 different Domains, one whitelisted, anotherone not. mx1 postfix/smtpd[2085161]: NOQUEUE: reject: RCPT from unknown[x.x.x.x]: 450 4.1.8 <root@servername.local>...
-
Ttcnewone replied to the thread proxmox.com DNS status: SERVFAIL.@cheiss: soeben hatte ich das Problem wieder: dig a proxmox.com @127.0.0.1 +short bringt kein Ergebnis, Mails (z.B. Info-Mails von beobachteten Threads im Forum) werden abgewiesen, weil der Servername firstgate.proxmox.com nicht aufgelöst werden...
-
CTo be clear we should not have to enable RA. RA is the required default behavior. As-is Proxmox does NOT support IPv6 because manual configuration override is required for all nodes for any proper IPv6 net.
-
Zzmaga posted the thread Proxmox started freezing, read-error on swap-device, EXT4-FS error in Proxmox Backup: Installation and configuration.Hello, recently my proxmox server has been freezing every few weeks/days. When it happens I'm not able to reach it via network. No ping, no ssh... When I plug a monitor to it I see the following (see image below): Read-error on swap-device...
-
-
Stoiko Ivanov replied to the thread Reject Unknown Senders (reject_unknown_sender_domain) - Whitelist.please share the logs of such a mail being rejected. -
Stoiko Ivanov replied to the thread [SOLVED] pop3s Proxy möglich?.Zumindest nicht mit (den Bordmitteln von) PMG - ich glaube es gibt sicher noch einige pop/imap proxies (potentiell hat nginx da was, sonst perdition - aber da sind meine Erfahrungen auch schon ~ 15 Jahre her - sprich bin nicht sicher ob das noch...
-
Yyorilouz replied to the thread Proxmox-backup-client (3.4.6): "unclosed encoder dropped" / "upload failed" during pxar backup (Following #170211 patches).Hi Christian, Thanks for the suggestion. I went ahead and upgraded both the client and the server to the latest available versions in the 3.x repositories. Here are the current versions: Proxmox Backup Client: 3.4.7 Proxmox Backup Server...
-
JJohannes S replied to the thread setting up network for OPNsense vm.You might want to read this piece by @meyergru https://forum.opnsense.org/index.php?topic=44159.0
-
JTbh if you are not familiar with PVE and VMs it will be a lot easier with a separate router. For instance if you have a PVE issue you may not have Internet to resolve it. Are you passing through this NIC to the VM? If not I would be very...
-
JPMG kann POP3/IMAP accounts abfragen (via fetchmail), filtern, und dann per _SMTP_ an einen Mailserver schicken - vielleicht lässt sich das verwenden: https://pmg.proxmox.com/pmg-docs/pmg-admin-guide.html#pmgconfig_fetchmail Ich hoffe das hilft!
