Latest activity

What's new Featured content New posts New profile posts Latest activity
  • G
    _gabriel replied to the thread Leveling up knowledge - Proxmox FW.
    it's not Proxmox related, it's a tcp/ip basis. I've no use case for "sport" neither experience to write an example.
  • G
    gfngfn256 replied to the thread Help to fix Proxmox access issues after power cut.
    Seeing you have shown that you have plenty of disk space available in root, I would now check available RAM on the node as insufficient memory can also cause systemd-logind to fail.
  • 6
    6equj5 replied to the thread Performane LXC oder Docker.
    Das kann ja nicht unbewältigbar sein. Schlimmstenfalls macht man einen neuen LXC mit Docker und kopiert die Daten vom andern rein. Oder. :)
  • V
    vesalius reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    I like this approach because Proxmox does a lot better job with NIC drivers, especially things like Realtek, than BSD does. Also changing hardware in proxmox is a lot easier this way.
  • V
    vesalius reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    Tell us about your hardware. Especially Proxmox. How many NICs do you have installed/available? I find if you want to run OPNsense (or in my case, the very similar pfSense) the easiest rout is if you have 2-4 NICs available. It can certainly be...
  • W
    wbk replied to the thread [SOLVED] Container restore expectation management?.
    Hi fabian, Thanks for mentioning! I updated the ticket with my observation that the running log is available from the PBS-side.
  • S
    Stefan Kittel replied to the thread PBS with NVME storage way too slow? How to optimize?.
    Hello, here local at the pbs itself. Same as per network. I tried fio with an random 4M approach... root@ns3265905:~# time proxmox-backup-client restore 'vm/100606102/2026-03-16T01:00:01Z' 'drive-scsi0.img.fidx' - --repository...
  • M
    m3m replied to the thread Leveling up knowledge - Proxmox FW.
    Interesting. Looks like I really need to refresh my firewall skills. So Proxmox doesn't require a source port? When does it require one? Thanks, that worked.
  • C
    celemine1gig reacted to Johannes S's post in the thread SSD als ext4 mounten und an OMV durchreichen with Like Like.
    OpenMediaVault sollte man gar nicht als lxc betreiben, das wird von den omv-Entwicklern nicht unterstützt: https://forum.openmediavault.org/index.php?thread/51217-trying-to-access-additional-drives-via-proxmox-with-lxc/ Wenn man gerne aus einen...
  • Y
    YourFriendHowy reacted to SteveITS's post in the thread setting up network for OPNsense vm with Like Like.
    Tbh if you are not familiar with PVE and VMs it will be a lot easier with a separate router. For instance if you have a PVE issue you may not have Internet to resolve it. Are you passing through this NIC to the VM? If not I would be very...
  • Y
    YourFriendHowy reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    Tell us about your hardware. Especially Proxmox. How many NICs do you have installed/available? I find if you want to run OPNsense (or in my case, the very similar pfSense) the easiest rout is if you have 2-4 NICs available. It can certainly be...
  • Y
    YourFriendHowy reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    I like this approach because Proxmox does a lot better job with NIC drivers, especially things like Realtek, than BSD does. Also changing hardware in proxmox is a lot easier this way.
  • Y
    YourFriendHowy reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    Do you have a managed switch? Or will everything be in one network (i.e., no vlans)? Either way is fine, but we need to know to be be able to assist when you run into bumps
  • Y
    YourFriendHowy reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    Oh, and keep you Proxmox machine close to your keyboard and monitor. Because Proxmox is based on Debian, you can configure everything from the command line, even without a network for SSH access. Just plug your keboard and monitor into the...
  • Y
    YourFriendHowy replied to the thread setting up network for OPNsense vm.
    Ive been messing with both proxmox opnsense and pfsense via chatgpt and claude. one reason im rebuilding is because i feel my knowledge s superficial after 6 months of tinkering with it all. I also start my CCNA course this eveningso i figure...
  • Y
    YourFriendHowy replied to the thread setting up network for OPNsense vm.
    yes i have a cisco catalyst 2960-l its older aswell. I plan on having 5 or so vlans, I cant remember all of my plans an unfortunately the plans are on my desktop that I wont have a place to setup until later so for right now i will like get...
  • M
    Markku reacted to shanreich's post in the thread evpn? network segmentation? with Like Like.
    You do not need to peer BGP with a tenant VM. Your router / gateway, that is handling north-south traffic, should announce the default route to the PVE nodes in the L2VPN EVPN address family for the respective VRFs. You need to configure the VRFs...
  • G
    _gabriel replied to the thread Leveling up knowledge - Proxmox FW.
    remove "sport" as you often don't control the source port.
  • C
    celemine1gig replied to the thread Intel 350 NIC No Longer Supported?.
    Have a look at the following: https://forum.proxmox.com/threads/error-passtrough-intel-x520-da2-vms-wont-start.146776/#post-663115 Might be helpful for the i350 as well. No guarantees, though. Edit: For the mentioned Supermicro LGA2011 board...
  • L
    louie1961 replied to the thread setting up network for OPNsense vm.
    Oh, and keep you Proxmox machine close to your keyboard and monitor. Because Proxmox is based on Debian, you can configure everything from the command line, even without a network for SSH access. Just plug your keboard and monitor into the...
Show older items
Top Bottom
Back