Latest activity

What's new Featured content New posts New profile posts Latest activity
  • UdoB
    UdoB reacted to louie1961's post in the thread setting up network for OPNsense vm with Like Like.
    I like this approach because Proxmox does a lot better job with NIC drivers, especially things like Realtek, than BSD does. Also changing hardware in proxmox is a lot easier this way.
  • UdoB
    UdoB reacted to SteveITS's post in the thread setting up network for OPNsense vm with Like Like.
    Tbh if you are not familiar with PVE and VMs it will be a lot easier with a separate router. For instance if you have a PVE issue you may not have Internet to resolve it. Are you passing through this NIC to the VM? If not I would be very...
  • K
    kransom replied to the thread PBS is locking up.
    Let me know if I need to provide any other information. I tried looking this up before and it looks like a kernel panic.
    • pbs-error.jpg
  • D
    DigitalLF replied to the thread from 3node to standalone. lost config.db.
    I had a backup of Home Assistant OS so i just did a new one. but when i run LVS they are all still there. but i have not been able to recover my Ubiquiti Controller and my backup was 6 months old but i did install the new UniFi Server OS as a VM...
  • UdoB
    UdoB replied to the thread [SOLVED] Verschlüsseltes dataset verhindert boot?.
    Aus der Hüfte geschossen: Du kannst mal testen, was geschieht, wenn du zfs set canmount=off rpool/enc setzt.
  • L
    louie1961 replied to the thread setting up network for OPNsense vm.
    I like this approach because Proxmox does a lot better job with NIC drivers, especially things like Realtek, than BSD does. Also changing hardware in proxmox is a lot easier this way.
  • L
    louie1961 replied to the thread setting up network for OPNsense vm.
    Tell us about your hardware. Especially Proxmox. How many NICs do you have installed/available? I find if you want to run OPNsense (or in my case, the very similar pfSense) the easiest rout is if you have 2-4 NICs available. It can certainly be...
  • O
    Onslow replied to the thread PBS is locking up.
    Hi, @kransom If you have or can have a monitor (I mean a physical display) connected to the server, there may be some errors displayed on it when for any reason the system isn't already able to log anything to the files.
  • C
    carles89 reacted to bbgeek17's post in the thread Can't create VMs in PVE-9.1.6 with Like Like.
    The fix is in process: https://lore.proxmox.com/pve-devel/20260310091141.814416-1-d.csapak@proxmox.com/T/#t https://lore.proxmox.com/pve-devel/20260310091141.814416-1-d.csapak@proxmox.com/T/#m47eaa3b51d88a1ecbb4b21401c6ad834ec9aaaf4...
  • C
    carles89 reacted to andreisrr's post in the thread Can't create VMs in PVE-9.1.6 with Like Like.
    For now a downgrade of pvemanager to 9.0.12 was the solution. Apparently there is a single line change that invokes a JS feature implemented in Firefox 130+ (hence my ESR115 doesn't work).
  • bbgeek17
    bbgeek17 replied to the thread Can't create VMs in PVE-9.1.6.
    The fix is in process: https://lore.proxmox.com/pve-devel/20260310091141.814416-1-d.csapak@proxmox.com/T/#t https://lore.proxmox.com/pve-devel/20260310091141.814416-1-d.csapak@proxmox.com/T/#m47eaa3b51d88a1ecbb4b21401c6ad834ec9aaaf4...
  • bbgeek17
    bbgeek17 reacted to andreisrr's post in the thread Can't create VMs in PVE-9.1.6 with Like Like.
    For now a downgrade of pvemanager to 9.0.12 was the solution. Apparently there is a single line change that invokes a JS feature implemented in Firefox 130+ (hence my ESR115 doesn't work).
  • J
    Johannes S reacted to whatishappening's post in the thread How to gracefully handle cert renewal? with Like Like.
    ohhhh, ok didn't understand that. I actually see the "required for self signed certificates" after clearing the fingerprint. Well that's easy enough then thank you.
  • J
    Johannes S reacted to wbk's post in the thread How to gracefully handle cert renewal? with Like Like.
    Hi whatishappening, I ran into that as well after configuring LE. The fingerprint is mandatory when lacking 'real' certificates. Once your nodes have LE certs, you can leave the fingerprint empty.
  • J
    Johannes S reacted to bbgeek17's post in the thread iSCSI interfaces with Like Like.
    It is the iSCSI target that advertises the portals (where IPs are asigned). The iSCSI Target is the TrueNAS, so its the TrueNAS that informs the Initiator (PVE) about possible connection options (Portals). Your situation is described as one of...
  • T
    tcnewone replied to the thread [SOLVED] pop3s Proxy möglich?.
    Was @Sinux meint, ist die Nutzung des PMG als POP3(s) Proxy. Endnutzer verbinden ihr Clientprogramm nicht direkt mit dem Mailserver sondern stattdessen mit dem PMG und der reicht die POP(s) Anfrage an den Mailserver weiter (eben ein Proxy)...
  • SteveITS
    SteveITS replied to the thread setting up network for OPNsense vm.
    Tbh if you are not familiar with PVE and VMs it will be a lot easier with a separate router. For instance if you have a PVE issue you may not have Internet to resolve it. Are you passing through this NIC to the VM? If not I would be very...
  • C
    Cookiefamily reacted to Robin C.'s post in the thread Increasing Ceph pg count / Experience report on performance impact and duration with Like Like.
    With your current utilization, I estimate around 12 hours, assuming you have a decent node-interconnect (25G / 40G / 100G) That's actually a tricky question. Since Ceph Nautilus, if you have default settings, Option 1) or 2) will not really make...
  • I
    ivenae reacted to tcnewone's post in the thread PMG mit Unbound und RBLs with Like Like.
    wenn er die DNSBL "zen.spamhaus.org" unter Configuration / Mail Proxy / Options / DNSBL eingetragen hat, ist die Endung völlig korrekt. für 100 Mails/Tag braucht es m.E. keinen personalisierten Link - wir arbeiten auch einfach mit...
  • T
    tcnewone replied to the thread PMG mit Unbound und RBLs.
    wenn er die DNSBL "zen.spamhaus.org" unter Configuration / Mail Proxy / Options / DNSBL eingetragen hat, ist die Endung völlig korrekt. für 100 Mails/Tag braucht es m.E. keinen personalisierten Link - wir arbeiten auch einfach mit...
Show older items
Top Bottom
Back