Latest activity
-
VViper_Prime posted the thread [SOLVED] Console (web gui) not working after update from 8 to 9 in Proxmox VE: Installation and configuration.When i open the console (web gui) it throws this error: failed waiting for client: failed to lookup address information: Name or service not known TASK ERROR: command '/usr/bin/termproxy 5901 --path /vms/101 --perm VM.Console -- /usr/bin/dtach -A...
-
MMcShadow posted the thread Restore speed bottleneck in Proxmox Backup: Installation and configuration.Hi! we are experiencing a consistent restore performance limit of about 2.5 - 3 GB/s when restoring from PBS to PVE. TL;DR: Restore speed from PBS to PVE is capped, independent of any configurations. CPU is not saturated and we cannot identify...
-
YYou can limit the arc live without reboot (not persistent) or persistent: Set arc min and max persistent on reboots: $ vim /etc/modprobe.d/zfs.conf >>> options zfs zfs_arc_max=34359738368 options zfs zfs_arc_min=17179869184 <<< update-initramfs...
-
JJonathan50543 replied to the thread Regression in 6.17.13-1/2-pve: DMAR faults with VFIO when intel_iommu=on iommu=pt (works on 6.17.9-1-pve).What kind of journal would you like? From the host or the guest? It did break the device connection in the guest, as my disks were shown disconnected and the CX5 NIC unreachable.
-
Iinfinitegsltd replied to the thread Proxmox Unresponsive due to Full Storage Space.I will try this and hope it works, thank you.
-
G_gabriel replied to the thread PBS with NVME storage way too slow? How to optimize?.edited on PVE side isn't ? what about 128 concurrency and 16 threads ?
-
Iinfinitegsltd reacted to bbgeek17's post in the thread Proxmox Unresponsive due to Full Storage Space with
Like.
This means that you are trying to delete a Virtual Disk/Image that matches the index ID of an existing VM. If you cannot see this disk in the VM hardware platform then you need to scan the disk in: qm disk rescan (man qm). Or, if you insist doing... -
Iivenae replied to the thread [SOLVED] pop3s Proxy möglich?.Das ist ein Gateway, der holt dir die Post nicht irgendwo ab. Er erwartet, dass fremde Mailserver sie dir liefern und leitet die zu einer Endstation via Port 25 weiter. Das ist kein Mailserver, bei dem du deine Post abrufen kannst. Sicherlich...
-
Iinfinitegsltd replied to the thread Proxmox Unresponsive due to Full Storage Space.Ok, thank you. I am looking for a way to resolve on the Proxmox dashboard level and Shell is not working on Proxmox due to this so I will have to explore an alternative way to get it resolved.
-
KMy proxmox backup server is locking up frequently causing no SSH or console access. Only a hard reboot will restore communication to the server. I believe it is a kernel panic or some sort of hardware failure. I try to view the logs, but it seems...
-
Ooldfart reacted to louie1961's post in the thread Nvidia drivers not surviving kernel update with Like.
I had this same issue with my Debian 13 Docker VM. To fix this you need to install dkms and the matching headers for your new kernel: apt install dkms pve-headers-$(uname -r) Then re-run the .run installer as before. After that, verify DKMS is...
-
Bbellaireroad replied to the thread Cluster best practices.On second thought, what do you mean with "I am going to put them on a seperate network"? As in different IP range, different DHCP assignment etc? then of course the above is not true and you'll probably not be able to (live) migrate without...
-
XXande replied to the thread SSD als ext4 mounten und an OMV durchreichen.Die SSD lässt sich aber nur als LV einbinden. Wenn ich alle drei SSDs zu einer zusammenfassen möchte ist das schön, aber ich will nicht unbedingt eine LV-Gruppe (in die dann nur eine SSD liegt, also wieso dann ein LV?)
-
bbgeek17 replied to the thread [SOLVED] Proxmox iSCSI login works but LUN not visible when using Nimble group target.Hi @fettmasta . It sounds like you are using iscsiadm to establish the connection. Please keep in mind that there is nothing specific to PVE in the operations you are performing. PVE runs on a Debian userland with a Proxmox-maintained Linux... -
ATa muchly. I'll be honest and say I looked, didnt immediately jump out at me hence the above. Cheers for pointer, will post.
-
Mmonkfish replied to the thread Req: reboot button in NoVNC.Ta muchly. I'll be honest and say I looked, didnt immediately jump out at me hence the above. Cheers for pointer, will post.
-
XXande posted the thread SSD als ext4 mounten und an OMV durchreichen in Proxmox VE (Deutsch/German).Hallo zusammen, ich kämpfe gerade ein bisschen und habe schon zweimal den Proxmox neu aufgesetzt weil ich es nicht hinbekomme eine SSD von Proxmox an eine OpenMediaVault LXC durchzureichen. In der Konsole bekomme ich den Fehler: mount...
-
VViper_Prime replied to the thread [SOLVED] Can't login with web gui, but ssh works and VE auth works too.[solved] solution: Now its clear, you get:rp_id is not an effective_domain of rp_originfailed to begin webauthn context instantiation: The configuration was invalidYour logs clearly show a WebAuthn configuration error, not a problem with the UI...
-
bbgeek17 replied to the thread [SOLVED] Can't login with web gui, but ssh works and VE auth works too.Here is a thread that may be helpful: https://forum.proxmox.com/threads/proxmox-ve-web-gui-is-a-blank-page.172804/ I used the following google search terms : proxmox reinstall web toolkit helper script Blockbridge : Ultra low latency all-NVME...
-
Ffettmasta posted the thread [SOLVED] Proxmox iSCSI login works but LUN not visible when using Nimble group target in Proxmox VE: Installation and configuration.Hello, I am setting up a Proxmox host to connect to an HPE Nimble SAN over iSCSI and running into an issue where the host logs in successfully but no LUNs appear. The host has two dedicated iSCSI interfaces on separate networks. Both can reach...