Latest activity

What's new Featured content New posts New profile posts Latest activity
  • bbgeek17
    bbgeek17 replied to the thread Problem with SANs on a three node cluster.
    You keep missing the point that the ZFS exists on the storage device side. The storage device, in your case Ubuntu, has a ZFS pool implemented by you, manually. You specify the name of that pool in PVE config to let PVE know what you named that...
  • W
    WonkyDonkey replied to the thread Deleted current kernel using dpkg - Now get Kernel Panic.
    Happy to report that earlier today I managed to fully recover my Proxmox system following the instructions and help above. Very happy bunny now, so thanks again for the helping hand.
  • G
    Ghosthawk replied to the thread Problem with SANs on a three node cluster.
    a) Yes, I have an external storage device b) Yes, I can login via ssh from the PVE-Node into the storage server c) Yes, the storage server has internal SSDs on a RAID Controller. All SSDs are in a RAID 10 without a filesystem and the LUN is...
  • I
    ivenae replied to the thread SRS (Sender Rewriting Scheme) (überarbeitet 28.08.24) gmail.com accepted/deferred bei E-Mail-Weiterleitungen.
    Danke für deinen Beitrag. Ich bin vorerst gescheitert, habs mit deiner Lösung aber sehr schnell hinbekommen. Hinweis: Kopiere das Template von /var/lib/pmg/templates/main.cf.in vor dem Bearbeiten nach /etc/pmg/templates/main.cf.in Dann wird es...
  • P
    pvemexer reacted to tsv0's post in the thread Debian 13.1 LXC template fails to create/start (FIX) with Like Like.
    Hi All hit an issue with updated LXC to Debian 13.1 TASK ERROR: unable to create CT 200 - unsupported debian version '13.1' FIX: you need to edit /usr/share/perl5/PVE/LXC/Setup/Debian.pm on line 39 and change from die "unsupported...
  • P
    pvemexer reacted to silverstone's post in the thread Debian 13.1 LXC template fails to create/start (FIX) with Like Like.
    Same Issue and yes, the Workaround works :) . I think that the Proxmox VE Team should just make a <= (current release + 1) Check or just filter the Content of /etc/os-release or /etc/debian_version to only keep the Major Version (13 in this...
  • S
    schulzemic replied to the thread Hard disk spins up every 30 minutes.
    Nice! I am affected by this bug. But I saw the notification that someone posted in this old thread, so this was the first place where I looked. Thanks!
  • I
    ivenae reacted to TRK68's post in the thread SRS (Sender Rewriting Scheme) (überarbeitet 28.08.24) gmail.com accepted/deferred bei E-Mail-Weiterleitungen with Like Like.
    Ich antworte mir mal selbst, um meinen gefundenen Workaround zur Installation von SRS (Sender Rewriting Scheme) zu präsentieren: 1. Zugriff auf das Proxmox-Mail-Gateway als root mit SSH: ssh root@xxx.xxx.xxx.xx 2. Paketquellen aktualisieren...
  • A
    alexskysilk replied to the thread Problem with SANs on a three node cluster.
    As I mentioned before, options 1 and 2 are available to you. option 3 is not, at least not in a non hackey way. options 1 and 2 work the same no matter whether you choose to use one, the other, or both, and dont interact/interfere with each other...
  • A
    alexskysilk reacted to bbgeek17's post in the thread Problem with SANs on a three node cluster with Like Like.
    ZFS over iSCSI in PVE is a specific scheme that implies: a) There is an external storage device b) You can login to this server via SSH as root (this excludes Dell, Netapp, Hitachi, etc) c) There is internal storage in that server (HDD, SAS...
  • L
    LBP321 replied to the thread All ZFS Pools Showing as 97% Full in PVE.
    Yeah, the backup performance is rough... It takes about 10 hours now to run a backup. I'm not in a place to spend on upgraded hardware right now though, so I'm just working with it for now. The three pools that I have concerns with are the...
  • B
    Balcony7199 replied to the thread Errors when creating or deleting a VM snapshot.
    Hello, my VM is running on ubuntu server and format is btrfs I believe if that's what you mean by file system but I'll attach a screenshot of the system below showing the distribution of storage if that helps. It's not too pressing for me, the...
    • 1773512614747.png
  • 3
    3dbruce reacted to cardre's post in the thread No spin-down via hd-idle after upgrade to 9.1.5 with Like Like.
    For those following this thread, I've finally been able to unpin the proxmox kernel to use the latest 6.17.13-2-pve and have my two zfs mirror hard drives stay in standby. So for me at least with only a couple of hours testing, this finally...
  • A
    acurus reacted to cardre's post in the thread No spin-down via hd-idle after upgrade to 9.1.5 with Like Like.
    For those following this thread, I've finally been able to unpin the proxmox kernel to use the latest 6.17.13-2-pve and have my two zfs mirror hard drives stay in standby. So for me at least with only a couple of hours testing, this finally...
  • A
    acurus replied to the thread No spin-down via hd-idle after upgrade to 9.1.5.
    I am also cautiously optimistic :-) Updated to 6.17.13-2-pve three hours ago, and the disks havn't spinned up since. @cardre: thanks for your post!
  • F
    FZR600 posted the thread Lost data after unmounting ZFS from node in Proxmox VE: Installation and configuration.
    Hello everyone, first time poster and novice Proxmox user The story from the begining: I was trying to decrease the root space of an LXC by Backup - destroy - recreate from backup And that succeeded without a hitch, the issue was that i had a...
    • 1773512740935.png
  • ModulesGarden
    ModulesGarden updated their status.
    Proxmox VE VPS & Cloud reunites with Products Reseller For WHMCS, opening new ways to build reseller offerings on top of your infrastructure. 15% OFF is still on!
  • S
    Singman replied to the thread iSCSI interfaces.
    On TrueNAS side, the portal is listening to only one interface, so it's ok, that's why he doesn't answer to other IP request. That's a problem because it create a lot of trying connections and big delay.
  • S
    Stefan Kittel replied to the thread PBS with NVME storage way too slow? How to optimize?.
    Update If I tune verify, I get 5.1 GBit/s and more proxmox-backup-manager datastore update data0 \ --tuning 'default-verification-readers=16,default-verification-workers=32' So PBS, the hardware and configuration can deliver this speed. But...
  • R
    RickW replied to the thread Help with a strange SPICE issue.
    I must have tried 30+ different settings, workarounds, manual command line things to get resizing working for kali 2025 in proxmox using SPICE but my screen always either froze, or i couldn't click on anything and every reboot the display went...
Show older items
Top Bottom
Back