Latest activity
-
Mmihaib replied to the thread reinstall proxmox and keep the settings.Not really. I can now boot and run proxmox from both ssd’s. What I’m asking is: how can I backup my nas vm so I can restore it on the new ssd where I installed 9.1?
-
SStereoscope replied to the thread Improve write amplification?.I'm presently looking into this and found this: https://www.youtube.com/watch?v=V7V3kmJDHTA read comments for additional discussion on the topic. This video is a lot newer than OP's post.
-
Ddavekempe posted the thread S3 Storage plugin for PVE in Proxmox VE: Installation and configuration.Hey all. We have put together a storage plugin for S3 storage for PVE. This comes from us having used a local directory and s3fs (fuse) with mixed results - bad things happen when the S3 storage goes offline, either via a proxy outage or...
-
Jat the end it's a Proxmox Perl API the storage vendor has to use ... https://pve.proxmox.com/wiki/Storage_Plugin_Development
-
JHi, this will only work if your Storage/SAN vendor will provide/support/develop a native Proxmox integration via a Proxmox Storage Plugin .... would ask your vendor
-
Fflames reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with
Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments... -
FHello all I am wanting to setup a backup network connection for my server, but I'm having issues due to my lack of knowledge/understanding. Primary link is a 10G fiber link Secondary is a 1G ethernet link Both links are on seperate switches. I...
-
Wwhydoentitwork replied to the thread [SOLVED] Proxmox VM combining tagged and untagged VLAN traffic (host behind Unifi switch).My setup is the following: I have different subnets that are routed to the public internet via different privacy VPN locations, depending on the subnet. If I set up a local DNS server and just use one default route for all DNS requests from all...
-
Wwhydoentitwork replied to the thread [SOLVED] Proxmox VM combining tagged and untagged VLAN traffic (host behind Unifi switch).That cleared up a lot for me, I'll look into that.
-
Wwhydoentitwork reacted to ce3rd's post in the thread [SOLVED] Proxmox VM combining tagged and untagged VLAN traffic (host behind Unifi switch) with Like.
I would say if you use curl with --interface you define the source interface and so the source IP. the default route remains the same and if the source IP is not in the same subnet, it can not reach the gateway and fails. if you want logic...
-
SteveITS replied to the thread Can only boot once a Clonezilla Windows Vista image.Why is the Windows 7 ISO attached? Maybe try safe mode and remove any laptop specific drivers? Audio, trackpad, etc. -
Ssgp replied to the thread [SOLVED] Creating cluster, migration fails due to ssh errors.In my case the issue was the datacenter-level firewall. While PVE has a default hidden allow rule for SSH, it seems that this rule doesn't apply to all NICs.
-
Jaside from that video very obviously being ai generated, the underlying point is not wrong. in modern windows versions, using 'host' cpu mode activates VBS (virtualization based security) which can incur a heavy performance penalty. Alternatively...
-
JJohannes S reacted to Impact's post in the thread Proxmox läuft nach Stromausfall nicht mehr with Like.
PVE nutzt (nach Installation) kein DHCP. Daher ist es wichtig eine IP Adresse außerhalb des DHCP Bereich des Routers zu wählen um IP Konflikte zu vermeiden. Der Router zeigt womöglich nur DHCP Clients an. Hat ein anderes Gerät dort die Adresse...
-
JJohannes S reacted to Impact's post in the thread Proxmox läuft nach Stromausfall nicht mehr with Like.
ALT GR und dann die Taste rechts neben SHIFT über STRG. Ist blau markiert. Siehe auch hier.
-
JJohannes S reacted to news's post in the thread Proxmox läuft nach Stromausfall nicht mehr with Like.
Wow, ich bin mal direkt, keine Ahnung von den Standards, aber man will eine Serverbetriebssystem auf Basis von Debian 13 in Verbindung mit Proxmox VE administrieren.
-
JJohannes S replied to the thread Feature Request: Different linked clone icon.Feature requests and bug reports should be filed on bugzilla.proxmox.com since there is no guarantee that developers catch any suggestion in the forum. The bugzilla on the other hand gets guaranteed attention
-
JJohannes S reacted to yummiweb's post in the thread [BUG?] PBS Sync (pull) completely ignores bandwidth setting with Like.
Thanks for the heads-up! I've noticed that myself in the meantime. It might be interesting to understand why I didn't see any speed difference in my tests: This was probably due to sshuttle, which in this configuration (standard buffer or no...
-
JJohannes S reacted to UdoB's post in the thread [BUG?] PBS Sync (pull) completely ignores bandwidth setting with Like.
The setting in "Add: Sync Job Pull - Pull Direction" accepts a "Rate Limit:" in MiB/s = Mebi Bytes. The usual (but not all) bandwidth diagrams show Bits per second. Any chance this was the culprit...?
-
JJohannes S reacted to yummiweb's post in the thread [BUG?] PBS Sync (pull) ignoriert Bandbreiteneinstellung komplett with Like.
Und noch ein Nachtrag - und wohl die Lösung Ich habe die "--no-latency-control" Option wieder aus dem sshuttle Befehl entfernt und die sshuttle verbindung neu gestartet, seitdem läuft der job mit einer Geschwindigkeit von ca. 40 Mbits (bzw...