Latest activity
-
bbgeek17 replied to the thread scheduled backup on PVE and NAS Wake-on-Lan (SMB storage offline).You have a possible race where "pvesm" status is possibly not yet propagated to PVE cluster view. I've asked Claude to help you, obviously I have not tested this for you. Good luck #!/bin/bash # ─── CONFIG... -
CCharrat replied to the thread No web GUI after upgrade from 9.0.11 to 9.1.6.have the same issue used PVE post install script from helper script, but i guess pve 9.1.6 update broke with that script removed all lines in /usr/local/bin/pve-remove-nag.sh file so it doesn't break pve when updating reinstalled pve-manager and...
-
WWolle-57 replied to the thread Proxmox läuft nach Stromausfall nicht mehr.Ich hoffe, das hier alle Infos zu entnehmen sind.
-
Mmobilephase replied to the thread Looking for Beta Testers for a Customizable RBL.Thank you ivenae. Exactly what I use it for. And you can also add to the white list if there are things you need with out opening the entire country. If you would like to check it out you can create an account at https://technikmx.com/
-
Sshrapneel replied to the thread PVE 9.1 running on a BOSS-S1 causing I/O errors and filesystem remounts as R/O.had the very same ussue - downgradig to proxmox-kernel-6.14.11-5-pve helped (just install package and proxmox-boot-tool kernel list just to make shure there is such kernel proxmox-boot-tool kernel pin 6.14.11-5-pve proxmox-boot-tool refresh...
-
WWolle-57 replied to the thread Proxmox läuft nach Stromausfall nicht mehr.
-
-
Eenry86cami replied to the thread scheduled backup on PVE and NAS Wake-on-Lan (SMB storage offline).I'm using this: if [ "$PHASE" = "job-start" ]; then echo "1. Inviando segnale WOL al NAS ($NAS_MAC)..." etherwake $NAS_MAC echo "2. Avvio Health Probe: attendo che lo storage $STOREID sia online..." # Tentiamo per un...
-
AAn.drea reacted to Bu66as's post in the thread [SOLVED] Nach Update auf 8.3.5 regelmäßige Abstürze: Edit: cause intel e1000e networkcard with
Like.
Wie @fabian schon gesagt hat, opt-in Kernel hilft hier. Für alle die noch damit kämpfen, konkret: apt update apt install proxmox-kernel-6.11 Danach Reboot. Ist ne bekannte Geschichte mit dem e1000e Treiber im 6.8er Kernel. @4Klaus probier das... -
bbgeek17 replied to the thread [TUTORIAL] PoC 2 Node HA Cluster with Shared iSCSI GFS2.I think OP is likely in a situation where their hypervisor hosts do not have significant internal storage. They, or their customers, already own an entry- to mid-level SAN solution and want to maximize ROI from it. Typically, people in this...
-
TTErxleben replied to the thread OpenWRT-Gateway Failover per VM.Dann hast du erstmal schon ca. 1.000€ in einen SPOF investiert. Was machst du, wenn das Teil komplett ausfällt? Hast du am Gerätestandort auch ordentlichen Mobilfunkempfang? Wie funktioniert das, wenn du gezwungenermaßen weitere 1.000€ für ein...
-
WWolle-57 replied to the thread Proxmox läuft nach Stromausfall nicht mehr.„Teile die Ausgabe von dem Status Befehl.“ ich habe hierbei leider nicht verstanden was ich nun machen soll?
-
WWolle-57 replied to the thread Proxmox läuft nach Stromausfall nicht mehr.ich würde ja gerne den ausgelesenen Datensatz schicken, aber ich bekomme den Datensatz nicht auf meinen 2 PC Kopiert.
-
SSteven-b replied to the thread [TUTORIAL] PoC 2 Node HA Cluster with Shared iSCSI GFS2.I am a little confused by your response so just checking if we are on the same level here... You can set up like for example: PVE01 > Hypervisor, packages for qnetdevice, LINBIT packages, ... PVE02 > Hypervisor, packages for qnetdevice, LINBIT...
-
WWolle-57 replied to the thread Proxmox läuft nach Stromausfall nicht mehr.Ja, habe ich gemacht. Danach scheint der Server zu laufen. Nach der Eingabe „ip a“ Kommt auch unter Punkt 4.umbro: inet 192.168.178.57/24 Aber wenn ich im Brauser diese IP: Aresse eingebe 192.168.178.57:8006 Passiert leider nichts bis die...
-
TTErxleben replied to the thread OpenWRT-Gateway Failover per VM.Den beiden VMs habe ich von Anfang an identische MACs verpasst. Sollte doch reichen oder? Nerviges flapping hatte ich bei Prüfung mittels nmap -p 53 8.8.8.8 ungefähr fünfmal täglich. Mit der jetzigen Lösung ist das verschwunden. Du hast aber...
-
bbgeek17 replied to the thread scheduled backup on PVE and NAS Wake-on-Lan (SMB storage offline).Add a sleep+healthprobe to your hook script? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Eenry86cami posted the thread scheduled backup on PVE and NAS Wake-on-Lan (SMB storage offline) in Proxmox VE: Installation and configuration.Hi all, I have a NAS that I keep powered off. I can successfully turn it on via Wake-on-LAN (WoL) and shut it down using an SSH command. My idea is to use a hook script: when the scheduled backup starts, the script should wake the NAS and then...
-
bbgeek17 replied to the thread Backup with Veeam failing (Disk Size=null).It is possible that OP did not permission the user/token properly. A quick way to check is to run: curl -k \ -H "Authorization: PVEAPIToken=<USER>@<REALM>!<TOKENID>=<SECRET>" \...
-
Llina replied to the thread 2FA issue for users created via LDAP group synchronization.I need help
