Sorry für die Einmischung, aber magst Du vielleicht mal kurz erläutern, warum Du @Bu66as für einen Bot hältst?
Gut, drei Dinge fallen mir auf:
er hat einen kryptischen Namen
er schreibt recht viel und fehlerfrei
er antwortet relativ fix
Aber...
AFAIK that is not possible.
That is about IO workers, not about how many VMs are backed up simultaneously.
Why would you want to do multiple backups at the same time anyway?
If you have a performance bottleneck, running multiple backups at the...
Sorry to dig an old post, but for anybody passing by:
I've resolved the issue by:
- remove the network device in Proxmox (copy the MAC if you want to keep it)
- removing the network device in the Windows' Device Manager (use the "Show Hidden...
Running PBS 4.1 and PVE 9.1.4
Trying to run concurrent pbs backup, modified jobs.cfg and added max-workers 3 and it doesn't seem to work, is there something I am doing wrong with config?
vzdump: backup-6c806b74-4e9f
schedule */4:00...
@Bu66as :
Sorry, ich bin gerade ein bisschen durcheinander und weiß nicht, was ich jetzt machen soll!?
Ein zpool status zeigt mir ja nun das an für meinen Pool 'Datengrab' :
root@pve:~# zpool status
pool: Datengrab
state: ONLINE
status...
Probably. As @SteveITS already said: a plain and minimal instance of Debian is sufficient.
Well..., there may be different opinions about this one. Personally I do not like Windows systems to be a required part of my infrastructure.
Two...
node > Disks or lsblk -o+FSTYPE,LABEL,MODEL.
node > Disks > .... What to use depends a bit on the use case and model number of the disk. Please share yours.
I like ZFS but it tends to perform badly with VMs on HDDs. without disabling sync or...
Regarding mdadm:
https://pve.proxmox.com/wiki/Software_RAID#mdraid
I agree with both gurubert and onslow that ssd is the prefered way to go for a PBS datastore but backup on hdd is still better than no backup. One possible workaround around the...
SOLUTION:
I have achieved this :
00:17.0 SATA controller [0106]: Intel Corporation Alder Lake-N SATA AHCI Controller [8086:54d3]
DeviceName: Onboard - SATA
Subsystem: Intel Corporation Device [8086:7270]
Kernel driver...
Hi, @Gabrielays
When you were searching for a solution, did you see this first result I've got in G. search?
https://forum.proxmox.com/threads/connection-error-401-no-ticket-nginx-reverse-proxy.94158/
Hi,
Since your hard disk (ide1) is orange, it's not plugged, you need to stop/start the VM to take effect; and it's most likely due to the fact that you are using the "LSI" controller with IDE disk (if I remember correctly, hot plug was never...
Currently (due to ongoing tests on this issue) I have no pinned kernel:
and it booted into the latest:
but I always select the first option in grub manually.
Ich setze immer auf RAID1, RAM ist immer genug vorhanden. Stimmt das damit bei ZFS die Lebensdauer der SSD stark leidet im Vergleich zu LVM, ich hab dazu verschiedene Meinungen gefunden
Update:
I checked the ASPM policy:
cat /sys/module/pcie_aspm/parameters/policy
Result:
[default] performance powersave powersupersave
ASPM was active.
I then disabled it entirely via kernel parameter.
Edit GRUB
File: /etc/default/grub
Changed...
Hallo @rothkraut, das automatische Zurückmigrieren nach einem Ausfall ist über HA-Gruppen mit Node-Prioritäten möglich.
Beispiel-Setup:
Gruppe "brandabschnitt-a": Node1 (Priorität 2), Node2 (Priorität 2), Node3 (Priorität 1), Node4 (Priorität...
Regarding mdadm:
https://pve.proxmox.com/wiki/Software_RAID#mdraid
I agree with both gurubert and onslow that ssd is the prefered way to go for a PBS datastore but backup on hdd is still better than no backup. One possible workaround around the...