Latest activity
-
Iihr posted the thread TASK ERROR: storage 'vms' is not online in Proxmox VE: Installation and configuration.Hello, I've two servers at the home lab. One plays the role of a NAS server with Truenas Scale installed. It is serving NFS v4 over a 10G network. Then there is a server with Proxmox that consumes that service from Truenas over vmbr1 and is...
-
Ddmpm replied to the thread Mismatching pve-ssl.pem certificate after hostname change - Correct process for renaming and changing the IP address of hosts in a cluster?.Annoyingly this isn't working on one of my nodes. The other one updated fine with --force and shows nodename.home which is what I've changed it to, but the other one still shows nodename.pbs.localdomain even though I've changed it to .home in the...
-
Aalia80 replied to the thread [SOLVED] Proxmox VE update to 9.1.5, now the network card is slow.I eventually figured it out, it was due to ntopng package and nothing to do with pfSense or Proxmox. I did find out that disabling pcie power saving can help: add pcie_port_pm=off pcie_aspm.policy=performance to GRUB_CMDLINE_LINUX_DEFAULT in...
-
Mmickyface replied to the thread User login failed.Thanks bbgeek17, it's not part of sudo and since I cant login with the root account I can't add it to sudo. what solutions will work best, reboot the host and reset the password?
-
fstrankowski reacted to news's post in the thread Defining where container templates and ISOs are stored with
Like.
yes, create one under storrage. -
Ffirsway replied to the thread Cannot snapshot VM - VFIO migration not supported.Thanks, will give that a try also..
-
fstrankowski replied to the thread Defining where container templates and ISOs are stored.Select which content will be stored on each pool under Datacenter > Storage Edit: @news was a little faster (but i have a nice image ;-) )
-
-
news replied to the thread Defining where container templates and ISOs are stored.yes, create one under storrage. -
Ddespens posted the thread Defining where container templates and ISOs are stored in Proxmox VE: Installation and configuration.Hello all! I have two ZFS pools: rpool is located on a fast SSD zpool and should hold the main operating systems and running containers. stor1 is a zpool located on regular HDDs and should hold data. When downloading images and ISOs, they're...
-
Ffirsway replied to the thread Cannot snapshot VM - VFIO migration not supported.Hi @fiona , Thanks for your response. I might try out the experimental approach and just make sure I have a good backup beforehand!
-
Ffirsway reacted to fiona's post in the thread Cannot snapshot VM - VFIO migration not supported with Like.
Hi @firsway, you cannot snapshot the VM if it has a passed-through GPU, since the GPU state cannot be preserved. The error is expected. There is an experimental flag, you could try at your own risk:
-
Ccyruspy replied to the thread How to implement and configure Tenancy with ProxMox.We have implement tenant isolation with the SDN part of the equation using multiple VRF/BGP combos to the external edge network element (firewall in our case). EVPN segregation via RT should be possible when the peer speaks EVPN. All the rest...
-
Wwbk reacted to alexskysilk's post in the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster? with Like.
I think you need to carefully consider what your end goal is. PCIe passthrough is not a good citizen in a PVE cluster, since VMs with PCIe pins not only cannot move anywhere, but also liable to hang the host. if you MUST use PCIe passthrough...
-
Wwbk replied to the thread Tape-Backup für Anfänger.Meiner Erfahrung nach, scheitert der backup Task als es im Pool keine leere Tape gibt wann PBS ein neue Tape braucht. Das ist aber einige Jahre her, seitdem mach ich mich sicher, dass es genugende (beschreifbare) Tapes im Pool gibt.
-
CDon't you hate when after 4hs troubleshooting a new cluster deployment, you found out cabling on 3 out of 20 servers was wrong? (Best case scenario). After running several remotely assisted deployments I found I needed a tool to standardize...
-
fstrankowski replied to the thread Proxmox web UI accessible but shell returns Error 500: close (rename) atomic file.....You created your account today and all of your 3 posts so far contain only AI Slop. What are your intentions at this point?
-
MM.D. Klapwijk replied to the thread Proxmox Datacenter Manager 1.0 (stable).I was wondering if actual subscription management is on the roadmap to be included? So integration with the webshop and assignment of sub/lic to the actual nodes and if so are the PMG's also being included?
-
fstrankowski reacted to Neobin's post in the thread [SOLVED] Potential bug in Proxmox when passing through PCI device with Like.
Disable/Uncheck: "All Functions".
-
Pph4zed replied to the thread extended LVM, now it's 100% used?.in the VM task window: TASK ERROR: unable to create VM 108 - not enough free space (0 < 528) I did, at some point, recreate "data" and then deleted it again, maybe that's what you're seeing.
-
Mmiztaq reacted to raiz3n's post in the thread Proxmox web UI accessible but shell returns Error 500: close (rename) atomic file.... with Like.
I fully agree with you. I have always managed to solve my issues thanks to the community, and I would like to clarify that I was not disappointed with the help provided here — quite the opposite. The discussions have been constructive and...
