Latest activity
-
Jjotha replied to the thread [SOLVED] PVE 9.1.5: Linux VM Freeze Randomly.Some update: after increasing the amount of RAM to 8 GiB the machine was running for 2.5 days. Unfortunately it freezed again: Any hint appreciated.... Thanks and cheers, Jörg
-
-
KKhensu replied to the thread NICs inoperative in ProxMox.Yes changing PCIe cards / adding some can cause the renames. You also need to change the interface in the vmbr0 bridge
-
-
PPartitionPrankster replied to the thread [SOLVED] OVS-IntPort equivalent for VXLan.Hey, So I tried creating a Linux Bridge in the UI. Looking at /etc/nework/interfaces.d/sdn I can see that there is an interface called „vxlan_mgmt“ and a bridge called „mgmt“, including the „vxlan_mgmt“ interface. But when creating the bridge...
-
Pproxjox replied to the thread NICs inoperative in ProxMox.UdoB, thanks for your help! Unfortunately, still no workie. I checked cable in another device and seems to work fine. So, apparently, when I inserted an HBA into card into a PCIe slot, ProxMox decided to change the network adapter names. I...
-
-
Sssfbc2000 posted the thread Fresh Proxmox Install - how to pass PCI Hardware to VM in Proxmox VE: Installation and configuration.Hey All, totally new Non-subscription Proxmoxuser. Using Co-Pilot I have worked through various hardware, and software issues preventing installation. I have installed, successfully updated my Proxmox install, and I have initiated my first VM...
-
MMihai replied to the thread Mount CephFS Fuse at Boot (Persistent).I got some help on the ceph subreddit. Adding x-systemd.automount,x-systemd.idle-timeout=1min to the fstab command seems to have done the trick.
-
Ssilverstone replied to the thread [SOLVED] Debian 13 LXC networking.service failed.I lost approx. 1h this evening with the Error dhcpcd[139]: eth0: ipv6_start: Cannot assign requested address. Nothing worked. I tried Managed Host Configuration (checked), Unmanaged Host configuration (unchecked), DHCPv6, SLAAC, Static. Nothing...
-
As my predecessors have already said, your configuration is trying to use the port enp3s0, which no longer exists. You still have enp7s0 and enp8s0. These are down because they do not appear in any network configuration. Either your power outage... -
KKhensu replied to the thread NICs inoperative in ProxMox.As my predecessors have already said, your configuration is trying to use the port enp3s0, which no longer exists. You still have enp7s0 and enp8s0. These are down because they do not appear in any network configuration. Either your power outage...
-
OOnslow replied to the thread NICs inoperative in ProxMox.Hi, @proxjox If the server with this exact configuration worked OK before the failure, then something must have changed, maybe because of the failure or adding or removing or changing the place of some device. Or newer kernel... I mean that...
-
UdoB replied to the thread NICs inoperative in ProxMox.In the first screenshot we see enp7s0 and enp8s0 - being "DOWN", please check the actual cables and the LED on the other end of the cable. In the second screenshot we see you've configured enp3s0. Different names --> it can not work...
-
Hi @ajpion , welcome to the forum. The system (Linux or Windows) allows for one default gateway. Any gateway beyond default one are not default by definition and need to be scoped for a particular subnet) destination. If your client and storage...
-
UdoB replied to the thread Migrating from mdadm to zfs despite using different disk sizes?.Yeah, should work. Personally I do not like scripts (and especially cronjobs) to deny doing its job silently...
-
PI had a power cable (CPU) failure that took my ProxMox server offline. After replacing the cable, the machine came back up with no network connectivity. The active link and network traffic lights on the ethernet port work during the BIOS...
-
-
Jjefersonflus replied to the thread [TUTORIAL] Proxmox PHP SDK: A thin PHP wrapper with full API coverage.Thank you for the clarification and for pointing that out. I appreciate the information regarding the trademark policy. I will proceed with the necessary adjustments to the project naming and description as soon as possible to ensure compliance.
-
Lliszca posted the thread [SOLVED] Bug ??? Adding a Mail to Whitelist adds also an empty entry to Blocklist in Mail Gateway: Installation and configuration.In the database it looks like that: |*@example.com|WL|*@microsoft.com|1772110006 |*@example.com|BL | |1772110006 I am asking if this is correct, because in Spam quarentine there was a Mail from @microsoft.com but...
-
Xxmp replied to the thread [SOLVED] Session Timeout for PDM.Thank you for the fast response.
-
JJohannes S reacted to Pigi_102's post in the thread [SOLVED] Issue with license ( from remote ) ? with
Like.
I've verified that after some time now everything looks fine. Probably it has been slow to gather every information from the servers. I'll mark solved. -
JJohannes S reacted to Bu66as's post in the thread cloud-init template für bereitstellung in whmcs with Like.
Das Image ist korrekt. ssh statt sshd ist nur Ubuntus Namensgebung — das ist nicht das Problem. Das Problem ist die Reihenfolge der Drop-in-Dateien. OpenSSH verwendet first match wins — der erste gesetzte Wert gilt. Die Dateien in sshd_config.d/...
-
JJohannes S reacted to rothkraut's post in the thread [SOLVED] PBS in separatem Netz zu WEB-UI anbinden? with Like.
Vielen Dank @Bu66as und @DjWulf Dann kann ich das wie geplant umsetzen. :)
