@Ahtse,
nein, das geht so nicht. Ein LVM-Storage (thick) in Proxmox unterstützt ausschließlich das raw-Format — qcow2 ist dort nicht möglich, unabhängig von irgendwelchen Einstellungen. Das ist eine Limitation des Storage-Typs in Proxmox, nicht...
Marking a disk as out on a Ceph cluster means it needs to rebalance because the disk will be voluntarily removed.
The disks used are enterprise‑grade K DC600M SSDs
Die Logs sind eindeutig — pmxcfs und Corosync sind nicht das Problem. ls /etc/pve/nodes/ antwortet in 0.003s, pve-cluster loggt nur normale "received log" und "data verification successful" Meldungen.
Die Ursache sind zwei Dinge:
1. Externer...
Hi Jonas,
after mentioned update (dist-upgrade, not cherry picking that one) network settings are back to "yes/no" and OSD flags have checkboxes.
I had and have no console issues at all.
Linux guests only, most of them using BIOS and a few...
Hi proxmox community,
I've been an advocator and user of proxmox for over 2 years now and I absolutely love it.
Custom attributes would be such a useful addition to proxmox (for automation and orchestration).
How can we get this feature added...
Hi Jonas,
after mentioned update (dist-upgrade, not cherry picking that one) network settings are back to "yes/no" and OSD flags have checkboxes.
I had and have no console issues at all.
Linux guests only, most of them using BIOS and a few...
Hi Jonas,
after mentioned update (dist-upgrade, not cherry picking that one) network settings are back to "yes/no" and OSD flags have checkboxes.
I had and have no console issues at all.
Linux guests only, most of them using BIOS and a few...
Using the new fabrics and overriding with frr.conf.local as mentioned by @fmaurer is fine as well.
Otherwise you can override the daemons config using the /etc/default/frr file...
Using the new fabrics and overriding with frr.conf.local as mentioned by @fmaurer is fine as well.
Otherwise you can override the daemons config using the /etc/default/frr file...
If you're willing to use an EVPN zone, then you can designate the two nodes with the uplinks as exit nodes. They will then announce a default route to the node02 and all traffic from node02 will be routed towards them.