Latest activity
-
fstrankowski replied to the thread Abschalten von "You do not have a valid subscription for this server ...................".Hatte ich vor einiger Zeit auch nochmal zur Diskussion gestellt und es gab die klare Ablehnung aufgrund der nicht rechtfertigbarer Kosten für Aufwand/Verwaltung dieser Lizenzen. Edit: Johannes war schneller. -
Ffrankz replied to the thread Error migration conntrack in live mode.At the moment I have changed the emulation of cpu from MAX or kvm to x86-64v2 , I'm trying to make migrations online and it's not giving any more error. I don't know if this can be considered the point of resolution of the problem, but if you...
-
Ok, mit der Hardware Angabe kann 10 Jahre alt sein oder 3 Wochen. Das kann vieles sein inkompatible Hardware, ich habe bei meinen installierten noch keine Probleme gehabt, habe es auch noch nie auf einem Notebook installiert. Bitte mehr... -
TtheOwnest replied to the thread communication failure (0) / Connection timed out (596).proxmox 9.1.5 still problem can I fix it by edit some configuration files?
-
Jjm1282 replied to the thread Proxmox newbie braucht Hilfe..Ok, mache ich. Danke
-
Pproxuser77 reacted to Johannes S's post in the thread Abschalten von "You do not have a valid subscription for this server ..................." with
Like.
Laut Aussage eines Proxmox Entwicklers hat man darüber schon nachgedacht und ist zum Schluss gekommen, dass das konterproduktiv ist: - Es gab schon früher mal eine Möglichkeit zu spenden, die dabei entstehenden Einnahmen (bzw. deren Mangel)... -
Nnec_k posted the thread "Disclaimer" but how do I send it to everyone except them "Whitelist"? in Mail Gateway: Installation and configuration.Hey guys, help me with the settings. How do I exclude the "Whitelist" created in the "Who" section from being added to the "Disclaimer" in emails? I can add it in the "Disclaimer" settings, and then the "Disclaimer" will only be sent to the...
-
Jjm1282 replied to the thread Proxmox newbie braucht Hilfe..Und vielleicht dies noch. journalctl -u pveproxy -u pvedaemon -u pvestatd -u pve-cluster --since "24 hours ago" -p warning Feb 25 04:47:20 pve pvestatd[1390]: auth key pair too old, rotating.. root@pve:~# pvecm status Error: Corosync config...
-
Jjm1282 replied to the thread Proxmox newbie braucht Hilfe..Vielleicht hilft das. journalctl --since "24 hours ago" Feb 24 06:36:03 pve NetworkManager[1025]: <info> [1771911363.9018] device (wlp0s20f3): set-hw-addr: set MAC address to 9A:D1:81:57:98:75 (scanning) Feb 24 06:36:03 pve...
-
Mmicneu replied to the thread Proxmox newbie braucht Hilfe..Ok, mit der Hardware Angabe kann 10 Jahre alt sein oder 3 Wochen. Das kann vieles sein inkompatible Hardware, ich habe bei meinen installierten noch keine Probleme gehabt, habe es auch noch nie auf einem Notebook installiert. Bitte mehr...
-
Aalpha754293 replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.Well...but that's the thing, it's not really working for me, hence why I am investigating an alternative system/proposal that would be optimised for cost, raw/usable capacity, latency, bandwidth, physical space, power, and noise. But isn't that...
-
JHallo zusammen, ich bin neu bei Proxmox. Folgendes Problem habe ich. Proxmox scheint immer nach ca. 24 Stunden selbst zu rebtooten. Ich kann dann dann nicht mehr via ssh oder Web UI auf den Proxmox Server zugreifen, erst nach einem von mir...
-
BBoss posted the thread v8 to v9 inplace upgrade - systemd-boot removal in Proxmox VE: Installation and configuration.Hi I'm researching the inplace upgrade process and have read a few posts already. The only warning I get when running the pve8to9 command is that the systemd-boot package should be removed. What concerns me is that the 4 clustered PVE servers...
-
JUse consumer SSDs at your peril. They fail and fail spectacularly. Only real solution is enterprise SSDs with PLP (power-loss protection) and for endurance.
-
JJohannes S reacted to alexskysilk's post in the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster? with Like.
Good plan. I hope you understand that this experiment will not ever be worth any money you put into it. You already have a working solution- and if the "politics" of the money prevent you from putting together a sane configuration you're just...
-
Ccdeck replied to the thread xe_guc kernel driver failing on Linux 6.14.8-3-bpo12-pve Proxmox PVE 8.4.16.Now that you say that, it's possible the GuC/HuC update fixed it for me too, I'm not certain if it crashed after doing that. so my kernel args might be a lie.
-
WWYDStepBro replied to the thread xe_guc kernel driver failing on Linux 6.14.8-3-bpo12-pve Proxmox PVE 8.4.16.Will give this a try if I get another crash. Updating the GuC/HuC for xe and i915 on Sunday has thankfully allowed me to utilize the b580 longer than 10 minutes, so that’s progress! Have actually been able to transcode HEVC>HEVC. Just glad it’s...
-
Ccdeck replied to the thread xe_guc kernel driver failing on Linux 6.14.8-3-bpo12-pve Proxmox PVE 8.4.16.@Swifty.hu I'm running the very latest firmware that released 2 weeks ago in intel's windows driver (the code above downloads that) including 21.1177 The firmware update fixed the encoder crash issue for some people online it seems, but not me...
-
FFaeAdmin replied to the thread Upgrading Dell R720 with 2x NVMe drives that are on PCIe cards.Nice to know about that PCIE SSD card. I had heard that the BOSS cards also work, but only with non-NVME m.2 drives. Perhaps the bifurcation problem for yours is a uefi/bios version issue? I have pcie bifurcation options in my UEFI system setup...
-
Aawirthy replied to the thread SSD ZFS Pool keeps increasing in usage space.I'm trying to wrap my head around this. Does that explain why SSD ZFS pool keeps increasing in size?