Latest activity
-
JHallo zusammen, ich bin neu bei Proxmox. Folgendes Problem habe ich. Proxmox scheint immer nach ca. 24 Stunden selbst zu rebtooten. Ich kann dann dann nicht mehr via ssh oder Web UI auf den Proxmox Server zugreifen, erst nach einem von mir...
-
BBoss posted the thread v8 to v9 inplace upgrade - systemd-boot removal in Proxmox VE: Installation and configuration.Hi I'm researching the inplace upgrade process and have read a few posts already. The only warning I get when running the pve8to9 command is that the systemd-boot package should be removed. What concerns me is that the 4 clustered PVE servers...
-
JUse consumer SSDs at your peril. They fail and fail spectacularly. Only real solution is enterprise SSDs with PLP (power-loss protection) and for endurance.
-
JJohannes S reacted to alexskysilk's post in the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster? with
Like.
Good plan. I hope you understand that this experiment will not ever be worth any money you put into it. You already have a working solution- and if the "politics" of the money prevent you from putting together a sane configuration you're just... -
Ccdeck replied to the thread xe_guc kernel driver failing on Linux 6.14.8-3-bpo12-pve Proxmox PVE 8.4.16.Now that you say that, it's possible the GuC/HuC update fixed it for me too, I'm not certain if it crashed after doing that. so my kernel args might be a lie.
-
WWYDStepBro replied to the thread xe_guc kernel driver failing on Linux 6.14.8-3-bpo12-pve Proxmox PVE 8.4.16.Will give this a try if I get another crash. Updating the GuC/HuC for xe and i915 on Sunday has thankfully allowed me to utilize the b580 longer than 10 minutes, so that’s progress! Have actually been able to transcode HEVC>HEVC. Just glad it’s...
-
Ccdeck replied to the thread xe_guc kernel driver failing on Linux 6.14.8-3-bpo12-pve Proxmox PVE 8.4.16.@Swifty.hu I'm running the very latest firmware that released 2 weeks ago in intel's windows driver (the code above downloads that) including 21.1177 The firmware update fixed the encoder crash issue for some people online it seems, but not me...
-
FFaeAdmin replied to the thread Upgrading Dell R720 with 2x NVMe drives that are on PCIe cards.Nice to know about that PCIE SSD card. I had heard that the BOSS cards also work, but only with non-NVME m.2 drives. Perhaps the bifurcation problem for yours is a uefi/bios version issue? I have pcie bifurcation options in my UEFI system setup...
-
Aawirthy replied to the thread SSD ZFS Pool keeps increasing in usage space.I'm trying to wrap my head around this. Does that explain why SSD ZFS pool keeps increasing in size?
-
Aalexskysilk replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.Good plan. I hope you understand that this experiment will not ever be worth any money you put into it. You already have a working solution- and if the "politics" of the money prevent you from putting together a sane configuration you're just...
-
NNCSyFry reacted to unsichtbarre's post in the thread Proxmox installation and configuration manual with Like.
Greentigs, I have put a Proxmox training manual together for my team (and others) and I would like to offer it here for review/use by the community. This is not intended to be a technical deep-dive, rather a practical point-to-point to help...
-
NNCSyFry posted the thread P2V/V2V errors and storage "failed to stat" errors preventing migration to PVE cluster hosts in Proxmox VE: Installation and configuration.I have a Proxmox 9.1.6 - 3 node cluster with shared iscsi LVM flash storage. I have one VM (VM 100) that I can successfully launch/start/migrate/move between hosts so I know the storage and cluster functions are working. On the hosts I see this...
-
-
Aalpha754293 replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.I'm so confused. Based on the last statement, therefore, tweaking what you wrote: "In erasure coded pools with m=1 you can lose 1 OSD for one PG at a time without losing data." But what you actually wrote was: "With size=min_size you cannot...
-
Ttando replied to the thread [SOLVED] GPU issues, no nvidia in /dev.I installed the Nvidia drivers, but it was not the right method because I have a Tesla M40, and I read that it is not recommended to install Nvidia drivers for the Tesla M40 on Proxmox. How can I uninstall the drivers that I already installed...
-
-
Mmueslo reacted to Sniper86's post in the thread Opt-in Linux 6.11 Kernel for Proxmox VE 8 available on test & no-subscription with Like.
Same hungs here with a Windows 11 VM. After few days without resolving the issue I rolled back to 6.8.12-3. I'll wait for a mature release. My host is a Supermicro sys-6018u-tr4t+ with 2x E5-2697A v4, 128GB ram, Nvidia P100 16Gb. As storage I've...
-
Mmueslo reacted to jason.houston's post in the thread Opt-in Linux 6.11 Kernel for Proxmox VE 8 available on test & no-subscription with Like.
I have gotten quite a few of the random lockups on 6.8.x kernel so I'm anxious to test this one. I have installed the 6.11 kernel on one host in my three-host cluster, it is stable so far other than one CT which will not properly start. I will...
-
Mmueslo reacted to pschneider1968's post in the thread Opt-in Linux 6.11 Kernel for Proxmox VE 8 available on test & no-subscription with Like.
With the new kernel 6.11.0-1-pve, I see hung tasks in the dmesg output of my Proxmox host, causing hangs and disconnected RDP sessions to my VMs. E.g. like this one on the host: [10201.836445] INFO: task kcompactd0:317 blocked for more than 122...
-
MHetzner replaced the whole server (1:1 with the same components).
-
MHello fellow Intel 13900 user. I already had a similar problem on one server on November 27th 2024...
-
Aalia80 replied to the thread [SOLVED] Proxmox VE update to 9.1.5, now the network card is slow.No sure how to interpret the first two, but I don't see any obvious errors using dmesg (output too long to post) and it does not seem like packets are going over iptables. Here is the output: ethtool -g eno4 Ring parameters for eno4: Pre-set...
