Latest activity
-
SSpongeRob replied to the thread PVE 9.1 Installation on Dell R515.OK, OK.. talking to myself again it seems, well should anybody be future searching maybe they'll find this post helpful (hopefully) Here's a quick run down of my testing.. FIRST and I know this is a slight pain, but check your downloaded...
-
-
spirit replied to the thread Proxmox SDN Traffic breakout Interface and routing.if you have talking about the vxlan tunnels themself or the bgp peers, they are simply using the route to reach to remote peers ips. so you can make simple routes on your host if needed. or do you want PBR specifically for the vxlan udp port... -
VVivienM replied to the thread Spontaneous reboots on Minisforum MS-A2 with 6.17 (and later 6.14).AMD microcode is installed. I guess I can find a keyboard/monitor to go poke at the BIOS, but if those things are set wrong, why doesn't 6.14.8-2 have a problem with it? Found something else while googling, someone having similar issues in...
-
BBobhWasatch replied to the thread Spontaneous reboots on Minisforum MS-A2 with 6.17 (and later 6.14).The stuff about setting a slightly higher voltage and/or lower frequency in BIOS seems relevant though. It might also pay to look at what c-states are enabled and whether you have the AMD microcode installed. Other than that I got nuthin'.
-
VVivienM replied to the thread Spontaneous reboots on Minisforum MS-A2 with 6.17 (and later 6.14).I didn't find that much, but I did discover that that message is cut off. Should be "software wrote 0xE to reset control register 0xCF9" When you google that, yes, it starts to get more interesting, but most of what I'm finding so far is about...
-
BBobhWasatch replied to the thread Spontaneous reboots on Minisforum MS-A2 with 6.17 (and later 6.14).Googling "software wrote 0xE to reset control register 0xC" leads to some interesting info.
-
VVivienM posted the thread Spontaneous reboots on Minisforum MS-A2 with 6.17 (and later 6.14) in Proxmox VE: Installation and configuration.Hi, This is a weird one. I have a Minisforum MS-A2, Ryzen 9955HX, 128GB of RAM, a Samsung SSD. Running up to kernels 6.14.8-2, it is rock solid. So I don't think it's a hardware issue... Newer kernels, certainly including all the 6.17s I've...
-
VVivienM replied to the thread Unexpected Reboots on current Kernel.I just came here to post about this too. My home lab Minisforum MS-A2 is rock solid under 6.14.8-2-pve, anything newer that I've tried, spontaneous reboots. A power issue caused the machine to boot back up in 6.17.9-1-pve, and... boom, less than...
-
JJohannes S reacted to IsThisThingOn's post in the thread SSD ZFS Pool keeps increasing in usage space with
Like.
I gave you one possible answer, but you choose to ignore it. As a funny coincidence you answered one of my questions by posting this picture; your volblocksize is 16k. So my theory was right. So again, every 1TB VM disk will not only use 1TB... -
JJohannes S reacted to Impact's post in the thread SSD ZFS Pool keeps increasing in usage space with Like.
I only answered your question. I explained that this setting does not change the need for discard in my first post's link.
-
JJohannes S reacted to Impact's post in the thread SSD ZFS Pool keeps increasing in usage space with Like.
I'd recommed setting up scheduled trim instead. Please share zfs list -ospace,refreservation -rS used qm config VMIDHEREOFAVMWITHLOTSOFUSEDDATA Also read this about how to properly use fstrim/discard. Pretty sure a zpool trim does not affect...
-
JJohannes S reacted to IsThisThingOn's post in the thread SSD ZFS Pool keeps increasing in usage space with Like.
You would have to provide a lot more information than what you posted here. Otherwise we have to make educated guesses ;) So just cluster, no HA? So you use ZFS and VMs use local RAW drives on ZFS? There are a few problems with that. Short: A...
-
Bb0nef1sh replied to the thread Unexpected Reboots on current Kernel.sadly, reboots came back so now im completely at a loss
-
JJohannes S reacted to DerekG's post in the thread NGINX Reverse Proxy for Proxmox WebUI on domain path with Like.
Why would anyone want to publish their Proxmox admin web console over the internet.? Surely the wiser approach would be to route that traffic via some sort of VPN, that is unless you are planning on providing access to the public.
-
JJohannes S reacted to fba's post in the thread Clarification, in PVE is ZFS RAIDZ actually RAIDZ1? with Like.
RAIDZ is the common short version of RAIDZ1, so single parity. There is no striping with just two disks available via WebGUI, because if one of the disks fails, all data would be lost. If you insist on using RAID-0 for data, it can be configured...
-
JHi, which kernel version are you using? Are you using the DKMS module for bcachefs?
-
G_gabriel replied to the thread Windows 11 VM and Core Isolation Memory Integrity.once VirtIO set, is Intel E1G kept is incompatible drivers listing ? (you need to install virtio drivers, see the docs)
-
JGenau das. Der `restore`-Befehl schreibt dir das Image raus, und du packst einfach zstd dahinter: proxmox-backup-client restore vm/100/2026-01-27T12:00:00Z drive-scsi0.img.fidx /mnt/usb/vm-100-disk-0.raw --repository user@pbs-host:datastore...
-
Hhungryhamster092 replied to the thread Windows 11 VM and Core Isolation Memory Integrity.I set the network device to VirtIO and restarted, it doesn't allow for core isolation to be turned on. In Device Manager it shows an unknown ethernet controller.
-
-
Ddasaint80 replied to the thread Nvidia driver install issue on Proxmox 9.That did it!! OMG what a trip!! thank you so much!
