Latest activity
-
OOnslow reacted to powersupport's post in the thread Raid1 boot array, drive replacement procedure with
Like.
Replacing a Failed Disk in Proxmox (BTRFS RAID1 – Simple Explanation) If one disk fails in a Proxmox BTRFS RAID1 setup, your server will still boot from the other disk. That’s normal and expected. Sometimes it boots in “read-only mode.” This is... -
SInisterPisces replied to the thread [PVE 9.1] Smartest Way to Run Ethtool Commands on PVE Node Boot?.… As long as I've been using Proxmox, and as often as I've had to tinker with the /etc/network/interfaces file to configure bonds and VLANs and everything else, you'd think I'd have realized it can actually be used to configure all of this sort... -
SInisterPisces reacted to Impact's post in the thread [PVE 9.1] Smartest Way to Run Ethtool Commands on PVE Node Boot? with Like.
Can't you add something like this to the NIC's stanza in the /etc/network/interfaces file? post-up /usr/sbin/ethtool -s $IFACE advertise 0x1800000001028
-
Mmattbatt replied to the thread [SOLVED] Cannot update fresh pve from pve-no-subscription repo.thanks this fixed it for me. Man they make you work to not pay a subscription.
-
Mmattbatt reacted to cheiss's post in the thread [SOLVED] Cannot update fresh pve from pve-no-subscription repo with Like.
Hi, You need to use http, not https here. apt repositories are already signed via GPG, so HTTPS does not add much here. Thats why we only serve them via HTTP, as that also can reduce load. (There are threads already about this topic here in the...
-
Jjanus57 replied to the thread Bug report from 2024-04-22.Hi, From what I see, the bug report is not rejected; it's just not a top priority, as nobody has been assigned or working on it. Best regards,
-
Aalexskysilk replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.from understanding failure domains. damn @UdoB beat me to the punch. I wont "professor" you on this. You can either read and understand, or deploy your preconcieved notions and learn on your flesh and blood. I would also note that if your...
-
Ssilverstone replied to the thread Trying to set IPv6 token, adding LXC options in container config file.Late Reply but one Option might be to mark the File as something that Proxmox VE shouldn't touch. I do this for /etc/resolv.conf inside a PiHole LXC Container, but I guess with the right Name it would work for anything. File...
-
Ccelemine1gig replied to the thread Offtopic: Jellyfin erzeugt beim Abspielen hohe Load auf ProxmoxVE.Selbst SAS SSDs (bei der Nennung von "10K" werden es hier HDDs sein) brauchen ordentlich Leistung. Aber das ist nur ein weiteres Teilproblem. Aus heutiger Sicht ist das genannte System halt einfach verschwenderisch, was die Energieeffizienz...
-
Zzeno0771 posted the thread USB Passthrough looking for nonexistent devices in Proxmox VE: Installation and configuration.PVE 9.1.5 with a plain-Jane Debian 13 container. I'm trying to pass through an FTDI USB-serial dongle (hereinafter, ttyUSB0). I add it as /dev/serial/by-id and it works; however, in addition to adding /dev/ttyUSB0, it also tries to add ttyUSB1...
-
CChrisBozeman reacted to RoCE-geek's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
The resolving commit for mentioned vioscsi (and viostor) bug was merged 21 Jan 2026 into virtio master (commit cade4cb, corresponding tag mm315). So if the to-be-released version will be tagged as >= mm315, the patch will be there. As of me...
-
UdoB replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.In my understanding usually the failure domain is "host". I need to be able to shutdown/reboot one node for maintenance. And I want everything to stay alive when (not: if) one node has any kind of problem. You will lose three or four OSDs if any... -
Hhmmmm replied to the thread Fresh Install - How to Storage?.Sorry I got the flue and did not replay yet. It is a SSD sorry for not saying that. Well there are 2 of them the 2nd is intend to work as backup for the Proxmox OS in case the first SSD fail for some reason. Sorry I did count again there are 17x...
-
Mmatesxs replied to the thread Proxmox crashes with Kernel Error.Thank you. I hope I will not need to change ram in current ram price situation. I am currently running memtest and everything looks good so far, but I will update bios and will see.
-
SInisterPisces posted the thread [PVE 9.1] Smartest Way to Run Ethtool Commands on PVE Node Boot? in Proxmox VE: Networking and Firewall.Hello, I need to have ethtool manually set an advertising flag on my NIC on boot, since the specific settings I need don't persist on reboot. In particular, without intervention, this NIC only advertises 1 and 10 Gbps speeds for...
-
Cchazwolf_ replied to the thread Cannot access web GUI at all.I think I'll try and do that, give it an IP outside of the range and see what happens.
-
Pprocrastination_shame replied to the thread [SOLVED] IOMMU on an AMD FX-8530 CPU.So, what did you do to make progress between the initial post and before vendor-reset, etc?
-
bbgeek17 replied to the thread Cannot access web GUI at all.If the pool ends at 249, then 240 is within the range. Pick an IP that is higher than 249 Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
CChrisBozeman reacted to RoCE-geek's post in the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025 with Like.
I'm afraid that I've already expressed all the key points or relevant ideas I had so far, so I've no need to repeat it. To be clear, I'm not saying that this is a KVM/QEMU/Proxmox problem, I'm just in the gang of those saying "look, something bad...
-
CChrisBozeman reacted to RoCE-geek's post in the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025 with Like.
And here is the root of "misunderstanding". Most of the contributors here are looking for the 24H2 side-effects mitigation, simply because a 3x increase of idle load is hardly acceptable for us, and we do not want to resign ourselves to the fact...