Latest activity
-
JJohannes S replied to the thread Temperature.I agree that Proxmox devs should focus on the core compotencies but what are you meaning with third-party add-onns? ProxmoxVE only has support for storage plugins natively but not for other add-ons. I don't think that's really a problem (see...
-
ANonsense. Displaying and alerting on (if a temperature gets higher than a set treshhold ) Temperature is one part of monitoring as well as displaying and alerting on CPU load, RAM or storage usage. And the funny thing is if you don't want to get...
-
JYour message is hard to understand. If all discs are separate (JBOD/no RAID) I think ZFS is the best option. 10 x 960GB SSD - ZFS RAIDZ You must set up notifications and make sure they work. RAIDZ can have one disc fail but not two. RAIDZ2...
-
JJohannes S reacted to alexskysilk's post in the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster? with
Like.
you dont need pci passthrough for lxc- just would need to install the proper nvidia driver based on hardware and kernel deployed. You are better off creating an installation script, especially if you intend on having multiple nodes with GPUs... -
JJohannes S reacted to alexskysilk's post in the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster? with Like.
I think you need to carefully consider what your end goal is. PCIe passthrough is not a good citizen in a PVE cluster, since VMs with PCIe pins not only cannot move anywhere, but also liable to hang the host. if you MUST use PCIe passthrough...
-
Both. PVE also counts cache. Htop shows this as yellow but it's hard to see/interpret. See free -h and google something like proxmox memory usage. There's decade old discussions about this. -
By default PVE Notifications have a single target called mail-to-root and a single matcher called default-matcher which sends all notifications to the email address defined for root@pam. Go to Datacenter -> Permissions -> Users and open up the...
-
UdoB reacted to alexskysilk's post in the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster? with Like.
I think you need to carefully consider what your end goal is. PCIe passthrough is not a good citizen in a PVE cluster, since VMs with PCIe pins not only cannot move anywhere, but also liable to hang the host. if you MUST use PCIe passthrough...
-
Rrch4905 posted the thread Feature Request: Proxmox Cloud Fabric (Service Discovery + IPAM + DNS + DHCP + Ingress + Zero-Trust VPN) in Proxmox VE: Installation and configuration.# Feature Proposal: Optional Proxmox Cloud Fabric Add-On ## Integrated Service Discovery, IPAM, DNS, DHCP, Reverse Proxy, and Zero-Trust VPN ## Summary This proposal suggests introducing an optional, modular **Cloud Fabric** add-on for Proxmox VE...
-
Ccjonesinbgwa posted the thread proxmox boot hangs with libkmod: error: kmod_config_parse: /etc/modprobe.d/vfio.conf in Proxmox VE: Installation and configuration.I have a proxmox server that will not boot correctly. It tries to boot normally but hangs with multiple "proxmox boot hangs with libkmod: error: kmod_config_parse: /etc/modprobe.d/vfio.conf " followed by line numbers. I have tried booting into...
-
UdoB reacted to Johannes S's post in the thread Platten 'landen' nicht im ZFS-Pool, was kann ich machen? with Like.
Ja sind sie, leider lässt sich bei einen RAIDZ (anders als beim Mirror) eine Platte nach dem Hinzufügen nicht wieder entfernen. Da geht dann nur der Austausch einer Platte mit replace oder komplettes Zerstören des Pools und neu-machen. Das...
-
Aalpha754293 replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.I don't? Huh. Good to know. My deployment notes were written, possibly originally for GPU passthrough to Windows VM but I have found that for AI workloads, that it has been better for me to share GPU resources between LXCs than using a Windows...
-
Llanepark5033 replied to the thread proxmox-backup-client.I'm backing up a bootable standalone physical disk and want the low tracks that contain the initial boot data included in the proxmox-backup-client data, how would this be included (To restore should the physical drive fail) if I specify specify...
-
Bbellaireroad replied to the thread Arc B50 Pro Crashes VM.slim sas is out. there are 4 NVME running there The Arc Pro B50 is PCIs 5.0 x8, and fit into a PCIe 16 slot where the other 8 lanes are used for power For Occulink, you need a card that has an ATX power header the card has a PCIe 16 slot for the...
-
Ddasaint80 posted the thread Nvidia driver install issue on Proxmox 9 in Proxmox VE: Installation and configuration.Hello, I've upgraded my proxmox from 8 to 9. I'm trying to reinstall the mvidia drivers. I've tried everything the magical Google provides. Currently running Proxmox 9.1.5 on a Zimacube with an RTX 3050 (ZT-A30510L-10L), Kernel is 6.17.4-2-PVE...
-
Aalexskysilk replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.you dont need pci passthrough for lxc- just would need to install the proper nvidia driver based on hardware and kernel deployed. You are better off creating an installation script, especially if you intend on having multiple nodes with GPUs...
-
Aalpha754293 replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.Agreed. Locally/self-hosted AI via LXCs. I am currently looking at getting something like this SYS-F628R3-RTBPT+ to try and see if I can improve storage services by deploying Ceph rather than using ZFS.
-
Aalexskysilk replied to the thread Pardon my less-than-intelligent question, but is there a way to install Proxmox on a Ceph cluster?.I think you need to carefully consider what your end goal is. PCIe passthrough is not a good citizen in a PVE cluster, since VMs with PCIe pins not only cannot move anywhere, but also liable to hang the host. if you MUST use PCIe passthrough...
-
Ssacarias posted the thread Bug report from 2024-04-22 in Proxmox VE: Installation and configuration.@t.lamprecht : I was told by a mod that maybe you could help with this old bug report: https://bugzilla.proxmox.com/show_bug.cgi?id=5400 In which I proposed innocuous changes to the PVE ISO installer. I also reported in the forums...
-
TWhen viewing the RAM usage of a PBS VM in the host view, it shows the usage to be 94%. I have some other monitoring tools (Pulse, Proxcenter), that also mirror this high number. However, if I SSH to the actual VM and run htop, it shows the usage...
-
