Latest activity
-
Ppietroaretino replied to the thread DKIM_INVALID but DKIM is valid....Check how your unbound resolves the dkim with dig or something vs external dns dig @127.0.0.1 TXT dkim._domainkey.domain.com dig @8.8.4.4 TXT dkim._domainkey.domain.com Try flushing the DNS. unbound-control flush_zone . or unbound-control flush
-
Bbitranox replied to the thread [SOLVED] Over 100% CPU Usage with one idle VM running in Proxmox 9.1.5.Your cpupower frequency-info output on the R740 is the key here: no or unknown cpufreq driver is active on this CPU Your working R730 has intel_cpufreq with the performance governor. The R740 has no frequency scaling driver at all. So the Xeon...
-
Falk R. replied to the thread Proxmox für 500-1000 VMs.Bei der Größe ist das noch kein Problem. Mit der VM Anzahl ist man ja im Bereich 10 bis max 20 Nodes. -
Aalexskysilk replied to the thread Move Storage fails with qemu-img convert (Invalid argument).Interwebs say this happens when the on-disk block size is going from 4k source to 512b destination. Is reformatting the destination volume a possibility?
-
JJohannes S replied to the thread Proxmox für 500-1000 VMs.Noch was zu großen Clustern und was man dann ggf. an den Corosync-Einstellungen anpassen muss: https://forum.proxmox.com/threads/proxmox-with-48-nodes.174684/post-825826
-
Nnilcemar replied to the thread Docker applications failing in LXC "failed to create shim task".After updating to PVE 8.4.16 the issue is solved!! Thanks !!
-
SHi @Chris This message: 2025-05-12T13:39:01-03:00: warning: unable to access non-existent chunk 780f82546e91812e1b1c04815c2afbf73ad963bc99650502b8c2b379093e3407, required by...
-
KKlug replied to the thread DKIM_INVALID but DKIM is valid....I checked the max size (found a thread about that in the forum) and fixed it. The CLI test was done once fixed. it happens on incoming emails. Emails are not bounced/refused. They all (all the ones I looked at and that had a DKIM signature) get...
-
Aalexskysilk replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.I didnt know that, but that kinda begs the question what does the dashboard offer you beyond what PVE presents; if it really something necessary, I'd probably just set up ceph with cephadm seperate from pve. PVE doesnt consider the entirety of...
-
Aavidee replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.It is a showstopper for the dashboard, which has it as a hard requirement. (Perhaps that’s a bug on Ceph’s part, but right now that’s what we have to deal with downstream.) Also, yes, I could spin up a separate smbd, but it would be nice to have...
-
HHoward A2 Labs reacted to kaltsi's post in the thread Problem with remove disk on ceph storage with
Like.
I had the same issue. :~# rbd rm vNTDB-Storage/vm-112-disk-0 2019-08-01 14:22:29.567286 7fc2b97fa700 -1 librbd::image::RemoveRequest: 0x560d820f5470 check_image_watchers: image has watchers - not removing Removing image: 0% complete...failed... -
Aalexskysilk replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.You dont actually need the module- all it does is integrate what you always could do with smbd. Its a nice to have, not a showstopper.
-
Rrhysf posted the thread Tag Propagation from PVE to PDM in Datacenter Manager: Installation and configuration.As PDM is only on V1.0 this may not be a feature as of yet but I thought I would ask encase I have missed something. on my PVE nodes I have set a 'Tag Style Override' which works fine on the PVE nodes but this does not propagate over to PDM. Is...
-
-
Stoiko Ivanov replied to the thread [SOLVED] DKIM_INVALID bei vielen bekannten Absendern.siehe: https://forum.proxmox.com/threads/dkim_invalid-but-dkim-is-valid.180964/post-839411 (ist die max spamsize >= die max email size)? falls das nicht das problem ist - könnte es noch am verwendeten DNS Resolver für PMG liegen. ein lokaler... -
Stoiko Ivanov replied to the thread Spam Report Mails aren't DKIM signed.This is explained in the docs, which @mfederanko linked: you need to change the signing domain source to 'header' instead of envelope. I hope this helps!
-
Ppietroaretino replied to the thread DKIM_INVALID but DKIM is valid....Do you have a log of one the emails that bounce/get rejected because of the DKIM-INVALID error? That may help. 1)Are the emails that have this error incoming or outgoing emails? 1)Are you running your own DNS? What DNS is your PMG using? 2)Are...
-
Bbitranox replied to the thread A Quick Question - Email from Address.The "from" address on PVE 7.x comes from two places, and you probably need to fix both. First, check what you set in the GUI...
-
Stoiko Ivanov replied to the thread DKIM_INVALID but DKIM is valid....On a hunch - check that your max spam size (GUI->Configuration->Spam Detector->Options) is as large as your max email size (GUI->Configuration->Mail Proxy->Options) - else spamassassin only sees a truncated version of the mail, which yields an...
-
VictorSTS replied to the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length).Thanks for the heads up. Pretty sure most where created with Ceph Reef except a few that got recreated recently with Squid 19.2.3. I'm aware of that bug, but given that I don't use EC pools (Ceph bugreport mentions it seems to only happen on OSD... -
Nnerdc0re replied to the thread Configuring dkim and DNS.Actually the limit for TXT records is 255 bytes (within a pair of quotes) which normally translates to 255 characters, and afaik this is universal and does not depend on your registrar. Normally you only run into this limit with 2048+ bit...
