Latest activity
-
JFleecing ist nur ein Cache damit du nicht auf den PBS warten musst. Die Backups laufen immer so, dass wenn während eines Snapshot Backups die VM schreiben möchte, muss der Block vorher gelesen werden und auf dem PBS geschrieben werden, bevor der...
-
JIch war einmal kurz beim Hersteller auf der Webseite. Das Itas Vision benötigt aber nicht unbedingt diesen T600? Und falls doch, ist der evtl. beim installieren nicht über dass Netzwerk greifbar (Flaschenhals) ? Wenn das Teil nach der letzten...
-
UHi @unsichtbarre , The only explanation , based on the technical details you posted, is that you do indeed have a route between the two networks. You should be able to figure it out with "ping" command, traceroute, and by checking ARP tables...
-
MMrHumpty posted the thread A Quick Question - Email from Address in Proxmox VE: Installation and configuration.Hi Folks, I've changed the 'from' address of my prox node, (v7,14 - yes, I know... on the wish list!) what service do i need to restart for the change to apply as it's still using the old address pve@pve-xx.local - which mail servers are...
-
Bbitranox replied to the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length).as others pointed out already this hits OSDs that are fairly full (~75%+) with heavy disk fragmentation. v19.2.3 already ships a race condition fix (https://ceph.io/en/news/blog/2025/v19-2-3-squid-released/) that prevents new corruption, but it...
-
bbgeek17 replied to the thread [SOLVED] Why six paths to iSCSI?.Hi @unsichtbarre , The only explanation , based on the technical details you posted, is that you do indeed have a route between the two networks. You should be able to figure it out with "ping" command, traceroute, and by checking ARP tables... -
Ppietroaretino replied to the thread Spam Report Mails aren't DKIM signed.Hello I am encountering the same issue. My domains have been DKIM signed since this PMG instance was setup still in version 7.X It is currently at version 8.2.10 however my daily and weekly spam reports have stopped sending. Running the command...
-
Ffd0 replied to the thread Move Storage fails with qemu-img convert (Invalid argument).Not a fix, but I had the same issue trying to clone from a template if storage was LVM to LVM (backed by iSCSI LUN on TrueNAS). Resizing to a bigger disk didn't help. I moved the template storage to RDB (Ceph), then I was able to clone to RDB...
-
Eeh_pmox posted the thread Zabbix Agent Not Working with Proxmox Firewall Even with Exceptions Enabled in Proxmox VE: Networking and Firewall.Good evening, I have a ProxMox 9.1.5 DataCenter with 2 nodes and 5 VMs + 5 VMs. On the second node, I installed Zabbix Appliance on almalinux, while on the first node I have 3 Windows Server/Pro VMs to monitor with Zabbix Agent. If the...
-
gurubert reacted to SteveITS's post in the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length) with
Like.
For reference, PVE doc on that: https://pve.proxmox.com/wiki/Roadmap#8.4-known-issues -
Uunsichtbarre posted the thread [SOLVED] Why six paths to iSCSI? in Proxmox VE: Installation and configuration.I was experimenting with iSCSI binding for SANs which have multiple interfaces on the same network and I am not sure I understand the results. iSCSI SAN has a management interface (10.26.20.98) and two iSCSI interfaces (10.26.22.30, 10.26.22.31)...
-
SteveITS replied to the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length).For reference, PVE doc on that: https://pve.proxmox.com/wiki/Roadmap#8.4-known-issues -
Hey, vielen Dank. Als zentrales Storage meinte ich eine zentrales Ceph Storage-Cluster, also kein HCI-Ceph. Wir vermuten, dass ist performanter. Siehst du da Probleme oder Nachteile.
-
gurubert replied to the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length).Have these OSDs been deployed with 19.2? You may be seeing this bug: https://docs.clyso.com/blog/critical-bugs-ceph-reef-squid/#squid-deployed-osds-are-crashing
-
Ttcnewone replied to the thread [SOLVED] Zusammenspiel Welcomelist / Blocklist.Problem gelöst: die erlaubten Sender nicht (mehr) über RegEx, sondern als "feste" Domains in der WL angelegt. Geht jetzt.
-
Aavidee replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.Is the SMB mgr module not planned to be shipped in the Proxmox Ceph package, or is it planned? I’m spinning up a Proxmox host soon, and I’d like to test Tentacle, but the combined lack of the dashboard (due to the dependency issue) and the lack...
-
Xx509 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.Can you please give me more of a breakdown on your node & networking setup?
-
Xx509 reacted to Nexces's post in the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad with Like.
I've just completed transition from 2x10G (LACP) to 25G mesh. 25G outperforms 2x10G - because hashing does not take link load into account... you can have one link overwhelmed by multiple heavy transfers and the other link completely bored...
-
Nis this working? Shouldn't this be one string? instead of two parts? "MrIUGyUwB5Js18VCB0K+KFKR6rvS72pMruZ4miRbl/qis0iHcML0io3h1IyS+kJaYmPXiqg1rcpwKggQus5JJatFeibECOAVYK1sZ2DFU306mGlepsHnjaS3p6Y7SDvswSdAjksn/dfDz3S"...
-
Nnicojijijiji replied to the thread Configuring dkim and DNS.Yes it did work, i separated like this because when i was looking for a solution i found a thread that split the key in 3, and it worked