Latest activity
-
gurubert reacted to SteveITS's post in the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length) with
Like.
For reference, PVE doc on that: https://pve.proxmox.com/wiki/Roadmap#8.4-known-issues -
Uunsichtbarre posted the thread [SOLVED] Why six paths to iSCSI? in Proxmox VE: Installation and configuration.I was experimenting with iSCSI binding for SANs which have multiple interfaces on the same network and I am not sure I understand the results. iSCSI SAN has a management interface (10.26.20.98) and two iSCSI interfaces (10.26.22.30, 10.26.22.31)...
-
SSteveITS replied to the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length).For reference, PVE doc on that: https://pve.proxmox.com/wiki/Roadmap#8.4-known-issues
-
Hey, vielen Dank. Als zentrales Storage meinte ich eine zentrales Ceph Storage-Cluster, also kein HCI-Ceph. Wir vermuten, dass ist performanter. Siehst du da Probleme oder Nachteile.
-
gurubert replied to the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length).Have these OSDs been deployed with 19.2? You may be seeing this bug: https://docs.clyso.com/blog/critical-bugs-ceph-reef-squid/#squid-deployed-osds-are-crashing
-
Ttcnewone replied to the thread [SOLVED] Zusammenspiel Welcomelist / Blocklist.Problem gelöst: die erlaubten Sender nicht (mehr) über RegEx, sondern als "feste" Domains in der WL angelegt. Geht jetzt.
-
Aavidee replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.Is the SMB mgr module not planned to be shipped in the Proxmox Ceph package, or is it planned? I’m spinning up a Proxmox host soon, and I’d like to test Tentacle, but the combined lack of the dashboard (due to the dependency issue) and the lack...
-
Xx509 replied to the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad.Can you please give me more of a breakdown on your node & networking setup?
-
Xx509 reacted to Nexces's post in the thread Is a 3-node Full Mesh Setup For Ceph and Corosync Good or Bad with Like.
I've just completed transition from 2x10G (LACP) to 25G mesh. 25G outperforms 2x10G - because hashing does not take link load into account... you can have one link overwhelmed by multiple heavy transfers and the other link completely bored...
-
Nis this working? Shouldn't this be one string? instead of two parts? "MrIUGyUwB5Js18VCB0K+KFKR6rvS72pMruZ4miRbl/qis0iHcML0io3h1IyS+kJaYmPXiqg1rcpwKggQus5JJatFeibECOAVYK1sZ2DFU306mGlepsHnjaS3p6Y7SDvswSdAjksn/dfDz3S"...
-
Nnicojijijiji replied to the thread Configuring dkim and DNS.Yes it did work, i separated like this because when i was looking for a solution i found a thread that split the key in 3, and it worked
-
Mmokrunka replied to the thread [SOLVED] Over 100% CPU Usage with one idle VM running in Proxmox 9.1.5.Also, maybe I should have added, this service was not installed on either host, I had to install it. And the command was run in the host, not within the VMs.
-
Ttricorax replied to the thread [SOLVED] Nach Aktivierung SR-IOV (NIC) ist die PVE GUI nicht erreich- & pingbar.Das Problem besteht nicht mehr. Es lag nicht am PVE-Node. Ich habe in der UniFi Oberfläche aus der Geräteübersicht den Node-Eintrag herausgelöscht. Danach war eine Verbindung zur GUI möglich. Ich nehme an, das irgendwie die ARP-Tabelle in UniFi...
-
Mmokrunka replied to the thread [SOLVED] Over 100% CPU Usage with one idle VM running in Proxmox 9.1.5.Server running normally: root@proxmox:~# cpupower frequency-info analyzing CPU 33: driver: intel_cpufreq CPUs which run at the same hardware frequency: 33 CPUs which need to have their frequency coordinated by software: 33 maximum...
-
VictorSTS reacted to fstrankowski's post in the thread Ceph squid OSD crash related to RocksDB ceph_assert(cut_off == p->length) with Like.
Best of luck to you * fingers crossed *. I had to rebuild the whole cluster in my clients case and fix ceph by manually restoring placement groups - which was a pain. -
Eeilko replied to the thread Configuring dkim and DNS.is this working? Shouldn't this be one string? instead of two parts? "MrIUGyUwB5Js18VCB0K+KFKR6rvS72pMruZ4miRbl/qis0iHcML0io3h1IyS+kJaYmPXiqg1rcpwKggQus5JJatFeibECOAVYK1sZ2DFU306mGlepsHnjaS3p6Y7SDvswSdAjksn/dfDz3S"...
-
FFingerlessGloves replied to the thread CPU doesn't reach C8 C-state in Proxmox (it does on Debian Bookworm).Where did you get too with this, I'm wondering if my i226 dual port card is causing the C3 being max state. I wonder if the card in have is using a PCIe switch chip perhaps which is why it can't reach other states. Little hard to debug when the...
-
NNeo77 replied to the thread Problem mit Firebird.Danke für deine Antwort. Gegentesten wird schwierig da der Download nur im Kundenportal möglich ist, es handelt sich um Itas Vision, ein Programm für die Tankstellenverwaltung. Zu den Fragen: -Die SSD ist mit am Perc -Proxmox ist EXT4 -hatte ich...
-
Stoiko Ivanov replied to the thread [SOLVED] PMG mix basic and community subscription.Glad that cleared up your question! For completeness sake - and if someone runs into this thread in the future - you can upgrade your subscription to a higher level in our shop quite easily... -
Mmokrunka reacted to Impact's post in the thread [SOLVED] Over 100% CPU Usage with one idle VM running in Proxmox 9.1.5 with Like.
The benchmark and governor test is to see if the node performance is different for some reason. Just share the outputs. In your specific case I'd also look into NUMA and test host CPU.